Hung Ta Instrument (M) Sdn Bhd

Seremban, Malaysia

Product Model: can be used with any dynamic vibration testing machine, according to the required operating space design.

 

High temperature or low temperature that causes the material characteristic of the specimen changes, may increase the vibration environment encountered when the incidence of functional degradation. If only a temporary variation occurs, temperature and vibration must be applied at the same time to obtain information about the degradation of such function.

 

Temperature extremes cause the resonance frequency drift of the specimen, which may lead to the vibration response of the specimen to magnify. Therefore, the temperature effect is especially important, and the environmental test of temperature, humidity and vibration is widely used.

 

This equipment system adopts the independent type, the vibration control system, the constant temperature and the constant humidity control system, may separately to the vibration, the high temperature, the low temperature, the temperature humidity individual test, or the union test. A need for a vibration machine can refer to the category of vibration machine introduction, and the machine can be designed with temperature and humidity box control.

Features :

• Each test module and test fixture is designed to be flexible enough to meet most relevant International Standards as ISO & EN.
• This tester is suitable to test bicycle parts & materials & cycles and integrated dynamic fatigue tests, the test function are sufficient with wide applications, compliant to test standards applied in numerous countries.
• This tester is module designed and able to select single mode type, due mode or third mode of structure specifications.
• This tester is manufactured under ISO-9001 quality certification standard.

Features :

• Each test module and test fixture is designed to be flexible enough to meet most relevant International Standards as ISO & EN.
• The force calibration conforms to ISO 7500/1, EN 1002-2, BS1016. DIN 5122, ASTM E4, JIS 87721/137733, CNS 9471/9470, JJG 475-88.

Features :

• Each test module and test fixture is designed to be flexible enough to meet most relevant International Standards as ISO & EN.
• This tester is suitable to test bicycle parts & materials & cycles and integrated dynamic fatigue tests, the test function are sufficient with wide applications, compliant to test standards applied in numerous countries.
• This tester is module designed and able to select single mode type, due mode or third mode of structure specifications.
• This tester is manufactured under ISO-9001 quality certification standard.

Vibration test equipment: test by the digital controller to control the power amplifier to drive 160KN vibrator, the test object locked & fixed to the top of the table, and through the vertical platform or horizontal slide undergo separately up and down, back & forth, around the three-axis vibration test.

 

For The composite vibration test, we can proceed with our unique technology and design of the combination of temperature box and vibration machine.

This tester is for testing the damping strength of shock absorbers. Available to test the shock absorbers for car and motorcycle and even truck, but only for rear shock absorbers for bicycle. Normally the specifications are different depending on different test requirements. Hereunder are the standard specifications for this model.

This vibration test equipment belongs to the oil pressure type, the narrow frequency vibration testing machine. It uses multiple sets of precision linear slide, steel structure and hydraulic cylinder with a strong horizontal load, high load capacity and large displacement characteristics.
Vibration controller with different functions can be sinusoidal vibration or random vibration; and vibration control and hydraulic control parts are protective mechanism.When the test is not normal, the machine will stop testing to prevent the test resulting in damage.
The base part is with excellent vibration isolation of the air spring, greatly reducing the additional vibration of the external environment. And by sensing the location of the oil pressure cylinder through displacement sensor, we can thus achieve the required level of vibration testing.

This vibration test equipment belongs to the oil pressure type, the narrow frequency vibration testing machine. According to customer needs with different hydraulic cylinders and four sets of air spring support structure, with high load and large displacement characteristics.
Vibration controller with different functions can be sinusoidal vibration or random vibration; and vibration control and hydraulic control parts are protective mechanism.When the test is not normal, the machine will stop testing to prevent the test resulting in damage.
The base part is with excellent vibration isolation of the air spring, greatly reducing the additional vibration of the external environment. And by sensing the location of the hydraulic cylinder through the displacement sensor, we can then reach the required vertical vibration test.

Side Impact Battery Tester

• The maximum impact force: 1500Kgf (15, 000N).
• Adjustable and measurable display of impact force and impact speed.
• Impact distance roughly about 1m, with high-pressure cylinder to get it through.
• Peripheral equipment: Sealed protective box, with tempered glass windows, lighting, exhaust fan and 2m long duct. Adjustable space fixture design.

Details

• The impact test equipment uses the air to store and release one time that it can oppress different mass and size of the impact block and then can produce different impact speed, to test if the impact subject (such as: acrylic, safety glass, etc.) itself is strong enough to withstand the impact of the current speed.The strength of the detection method is the use of speed sensors and monitors to view the current impact speed.
• Because this test has considerable risks, such as: the generation and discharge of debris, instantaneous air noise, so the impact of the test object is not only transparent with protective cover for isolation, but also for remote operation, and thus achieve safely and meet customer speed required for such testing.

 Yingge Test CenterIt is the country's largest vibration test machine.

Vibration Source Technology "Yingge Test Center"Was set up in 2013 and held for the official opening of large-scale testing machinein November, 2013.

Vibration test equipment:Tested by the digital controller to control the power amplifier to drive the 160kN large vibrator.The test object locked and attached to the top of the table, and through the vertical platform or horizontal slide, respectively, to make up and down, front and rear, left and right tri-axial vibration test.
For complex vibration testing, we can proceedthe combination of the vibration chamber and vibrator by our unique technique and design.

Machine capability:

• Maximum force: 160kN
• Frequency range: 1 2100Hz
• Maximum displacement: 76mm (peak)
• Maximum speed: 2.0m / s (peak)
• Maximum acceleration: 100G
• Vertical platform: 150 × 150cm 600kg
• Vertical platform resonance frequency: 500Hz or more
• Horizontal slide: 200 × 200cm 690kg
• Horizontal slide resonant frequency: 2000Hz or more
• Temperature inner box: 100 (W) × 85 (D) × 100 (H) cm
• Temperature range: -40 150

Details

• Vibration test equipment: test by the digital controller to control the power amplifier to drive 160KN vibrator, the test object locked & fixed to the top of the table, and through the vertical platform or horizontal slide undergo separately up and down, back & forth, around the three-axis vibration test.
• For The composite vibration test, we can proceed with our unique technology and design of the combination of temperature box and vibration machine.

 

Machine capability:

• Maximum force: 160KN
• Frequency range: 1-2100Hz
• Maximum displacement: 76mm (peak)
• Maximum speed: 2.0m / s (peak)
• Maximum acceleration: 100G
• Vertical platform: 150 * 150cm 600Kg
• Resonant frequency:  500Hz or more
• Horizontal slide: 200 * 200cm 690Kg
• Resonant frequency: 2000Hz or more
• Inner box: 100 (W) * 85 (D) * 100 (H) cm
• Temperature range: -40  150

Dynamic Fatigue Testing Machine that we bring forth fares better in all aspects – whether performance, durability, longevity, quality, etc. The machine is fabricated in compliance with the standards, from high-grade materials. From hassle-free performance to withstanding the test of time, our machine is all about the desirable qualities. We are standing amid the leading Manufacturers and Suppliers of Dynamic Fatigue Testing Machine in Malaysia.

We have the latest equipment and technology for the strict checking of raw material at the initial stage only. We ensure that prior to manufacturing the material is checked on the grounds of quality. Our prime concern is to fulfill variegated requirements of the clients, all the time. And, to achieve this objective, we have installed a capacious warehouse.

Grab the best deals on the precision-engineered Electro Hydraulic Servo Universal Testing Machine (HT-9501), here! We are backed with a well-equipped manufacturing facility and work through advanced ways of manufacturing to come up with never-failing Electro Hydraulic Servo Universal Testing Machine. We are grouped with the notable Manufacturers and Suppliers of Electro Hydraulic Servo Universal Testing Machine (HT-9501) in Malaysia.

Hung Ta has achieved a perfect design The rounded corners of the front face give a pleasing appearance the bump-free. Smoothly locking door has a flush surface that is free from any protrusions such as handles.

 

The model of programmable temperature/ humidity controller is under continuous improvement and so subject to change without notice.

Our company is a proficient Manufacturer and Supplier of Programmable Temperature and Humidity Chamber (HT-9745) from Malaysia. The Programmable Temperature and Humidity Chambers we make available are manufactured using the latest technology and quality-tested components. Strict quality-tests ensure that only defect-free Chambers reach the buyers. We are capable of delivering bulk orders of the Chambers within the promised timeframe. The entire range of the Chambers is reasonably priced by us.