Industrial Machinery #1770060

Details

• The main body of the machine is double-column type, and the table is stable when mounting, and the reliability is high.
• The impact table is made of aluminum alloy, and of rigid strength.
• When installation of fixtures and test objects, there are security protection devices.
• The table lifting adopts the automatic lifting mechanism, and the number of tests can be arbitrarily set on the control box.
• This machine can perform IEC 60068-2-27, 29; EIA RS-364-27; MIL-STD-1344A; JIS C0041;UL1642; UL2054; UN38.3.

Simulation of vehicle drivingï¼to test its seismic level of the exhaust pipe.

Bouncing test machine

• Frequency range: 120 420 RPM (2 8 Hz), can be customized.
• Rotational speed accuracy: 0.5 RPM or more.
• Fixed displacement amplitude: 25.4 ± 3% mm (Peak-Peak).
• Maximum load capacity: 100 Kgw
• Vibration table size: 600 × 600 cm
• Vibration direction: vertical up and down, and to flip the tested subject, to reach the level of all around vibration.
• Control method: with adjustable knob to seven-segment LED display with setting the vibration time knob (0 9999 minutes
• The above specifications can be customized
• If there is any inquiry, please call and will get back to you shortly.

For the packaging or carton design of the specimen, the simulation of its products in the transport environment (such as truck driving in the bumpy road) arising from the beating environment; In addition to test the product's ability to withstand beating environment, to verify whether the packaging material design of the product has sufficient protection ï¼bufferï¼capability.

Double support drop test machine

• The bearing plate is magnetically controlled, and the test subject is free to fall in an instant. Maximum load: 65Kg, test height 40-200cm, testsubject size 80x80x80cm, power requirements 220V 60Hz single phase.
• Lifting method: using motor drive, height can be adjusted.
• Test angle: angle, line and face of packaging container.
• Micro switch: upper and lower limits are micro-switch to prevent accidental operation of the impact, to protect the machine.
• Tape measure: with 200cm long roll tape, and the indicator can quickly see the actual scale movements.
• Fall plates: the use of aluminum alloy material which does not rust, and falling noise is small.
• Control button: The use of the button magnetic switch, only a light press on the DROP button, the plates can automatically fall, and can be adjusted up and down.
• Lead screw pole: the level of fall with round lead screw pole, can lift up and down vertically and smoothly.
• Control box: The machine and the control box are separated and can be controlled in a safer way to prevent the operator from injury due to falling.
• Grinding rod: one spindle, one auxiliary shaft on the left and right, all use the grinding spindle to prevent swinging from side to side.

Zero distance drop test machine

• Option1: Clip-on fixture designed specifically for hand-held device testing.
• Option2: digital control box, automatic lift control, can solve the problem of error resulted from observation of indicator more than 160cm test.
• The swing arm system is controlled by the air pressure for fast and precise positioning.
• Maximum load: 300Kg, test height 0-100cm, allowing measurementsample size 100x100cm, power requirements 220V single-phase, air pressure requires more than 5kg / cm2.
• Lifting method: using motor drive, height can be adjusted.
• Test angle: angle, line and face of packaging container.
• Micro switch: upper and lower limits with micro-switch to prevent accidental operation of the impact, to protect the machine.
• Tape measure: With 100cm long rolltape, and the indicator that can quickly see the actual scale movements.
• Fall plates: a group of 3-5 claws, the use of aluminum alloy material which does not rust, and falling noise is small.
• Control button: The use of the button magnetic switch, only a light press on the DROP button, the plates can automatically fall, and can be adjusted up and down.
• Leadscrew pole: the level of fall with round lead screwpole, can liftup and down vertically and smoothly.
• Control box: The machine and the control box are separated and can be controlled in a safer way to prevent the operator from injury due to falling.
• Grinding rod: The spindle with three ψ150 mm, all use the grinding spindle, to prevent swinging from side to side.
• Horizontal angle: There are four horizontal adjustableangles, with adjustable base level.

Feature : Cushion packaging design, packaging material selection, packaging contend design, drop specifications test.