Hung Ta Instrument (M) Sdn Bhd

Seremban, Malaysia

The Image Automatically Measuring Software, which we bring to you stands out of all others on counts of longevity and reliability. We are a top-notch Manufacturer and Supplier of Image Automatically Measuring Software from Malaysia. We offer the Automatic Measuring Software at the cost-effective prices, Place the order and get to know!

More about Image Automatically Measuring Software :

• The measurement and control of the tester system is to use high resolution image device, display the indentation clearly on the computer screen. Through the software for signal conversion, it automatically measures the hardness value of indentation. By designated and continuous testing process, it can draw the depth and gradient curve diagram. It is supported for WIN9X, WIN7, WIN2000, WINXP operating system. The micro Vickers, Knoop and carburizing layer can be tested. Hardness value can be carried out various forms of automatic conversion. You can choose high or low magnification objective lens according to your need. Image definition: > 540lines. It can regulate the contrast and brightness of the image, can respectively open, store or print the image files and data files. You can view the data files and image files any time, and print the data files by the form of tables and curves. The computer automatic measurement system can also be connected with our company's manufacturing DHV-1000, XHV-1000, MHV-1000 and HVS-5/10/30/50 types of digital   Micro / Vickers hardness testers. This instrument besides the original instrument configuration also equips with special nozzle, a CCD camera, computer, printer, image acquisition card, image test software, encryption locks.

• It can be used for the continuous experiment of continuous indentation reading after continuous loading, and can be carried out consecutive trials in each loading and each indentation reading. It is equipped with a CCD camera and video lines easy to observe, and can directly observe and measure the indentation on the display, and it has high accuracy for mouse control. For test conditions of setting, the results can be clearly and conveniently operated and displayed. By measuring software, it is conveniently operated through the computer, and can achieve a single point measurement and random multipoint measurement, data statistical measurement, arbitrary two-point or multipoint measurement for the spacing layer depth. It can be measured along the X or Y two direction, automatically carry out the calculation of infiltration depth, statistical calculations, conversion, display curve, judging whether qualified according to user input decision value ( such as 550). It is also capable of measuring length and angle of the parts and graphic preservation or printing. It can be used as a small-sized projector.

CCD Automatically Measuring Configuration is as follows :

• Halcon image capture card : one

• Computer : Lenovo; Hard disk: 160G; Memory: 1G; 19 inch LCD screen (Wide screen); (HP or Lenovo) color ink jet printer: one Hardware key : one

• Camera device : one

• Measuring software (Chinese or English) : one

• 1.5× adapter : one

Owing to our rich industry experience, we are enlisted among the preeminent Manufacturers and Suppliers of Coating Thickness Gauges from Malaysia. The Coating Thickness Gauges offered by us are manufactured using innovative technology. Our experts carry out various quality-tests on the Gauges before the final dispatch. Bulk orders of the Gauges are processed by us as per the specific requirements of the buyers.

Ultrasonic phased array is a combination of ultrasonic probe chip, arranged by a number of piezoelectric chip according to a certain regular distribution, and then sequentially by a predetermined delay time to stimulate the various wafers, all the ultrasonic waves emitted by the chip to form a whole wavefront, in order to achieve beam displacement, beam deflection and beam focusing and other characteristics, to achieve a variety of testing purposes.
Ultrasonic phased array technology has nearly 20 years of development history. Early mainly used in the medical field. Initially, the complexity of the system, the complexity of the wave propagation in solids, and the high cost of cost make it limited for use in industrial non-destructive testing. However, with the rapid development of electronic technology and computer technology, ultrasonic phased array technology is gradually applied to various industries such as industrial non-destructive testing, boilers, pressure vessels, railways, aerospace, petroleum and petrochemicals, electric power and universities.

Performance

• 128 Receive /64transmit channel phased array, digital to analog conversion support concurrent 64-channel operation, real-time phase control
• Combined Phased array, TOFD, A-Scan into one unit, key switch and free verification. easy to detect flaws
• Brand new procedural operation mode, easy to learn and use, easy to generate curve.
• The simulation function of multiple workpiece structure, make defect display intuitive and clear. (Use for detection for flat weld, "T" type weld, fillet weld, pipe welding, forging, metal plate, shaft, wheel rims and other workpieces)
• The simulation function of CAD Import of weld model.
• Integrated the function of sector scan flip welding seam
• Support for linear scanning, serial scan, sector scan, dual crystal scan (one sending, one receiving) scan, two-dimensional focusing scan and other scan modes;
• Coupling monitoring function
• Set display function of C-scan area
• Up to 60Hz display refresh rate, better graphic dynamic effect
• Full angle DAC curve generating and dB correction function.
• Entirely dynamic focusing makes performance better.
• Automatic alarm function for high gate and sound path gate, more efficient defect identification.
• Support the function of the full trip scan and record of encoder

Phased Array Function Parameter

• The number of element - 64/128
• Bandwidth - 0.5-15MHz (-3dB)
• Digital frequency - 100MHz 8bit
• Digital sampling point - 8192
• Digital smoothing average - 16
• S-scan harness- 256
• Repetition frequency - 1.0KHz-5.0KHz
• Display refresh rate - Up to60Hz
• Delay line precision - 2.5ns
• Detection mode - Positive detection, negative detection, full detection, radio frequency
• Launch delay range - 0-20us
• Transmitting voltage - 50V-100V
• Pulse width - 30ns-500ns (step10ns)
• Pulse transmit mode - Negative square wave
• Gain range - Analog gain0 - 80 dB
• Digital gain - 0 - 30 dB
• Gain stepping - Analog gain 0.1 dB, digital gain 6 dB
• DAC - 16 point
• TCG - 16point
• Focusing - Transmit single point focusing and receive dynamic focusing
• Scanning image - A/C/D/S/L

TOFD Module parameters

• Bandwidth - 0.5-15MHz (-3dB)
• Digital frequency - 100MHz 10bit
• Digital sampling point - 1024
• Digital averaging - 16
• Repetition frequency -100Hz-1KHz
• Display refresh rate - Up to 60Hz
• Detection mode -  Positive detection, negative detection, full detection, radio wave
• Transmitting voltage - 50V-350V
• Pulse width - 30ns-500ns,   (step 10ns)
• Impedance matching - 25Ω-500Ω
• Pulse excitation mode - Negative square wave
• Gain range - 110 dB, Minimum adjustment precision 0.1 dB

We are counted among distinguished suppliers of VS-1013 Battery Test Machine catering to buyers across diverse markets. Placed in Seremban(Malaysia), we share space with the top-notch Suppliers, domestically and offer top-of the line array of in the market.

Details

• Standard models comply with UL2054 standard, or can be designed according to your needs. Crush test, nail penetration and temperature cycling (heating) test functions all three in one.
• The top of the test box with explosion-proof transparent glass, easy to observe the test process, the rest of the surface with stainless steel plate for protection, the side reserved for test holes and pressure relief hole.
• Pinning and squeeze plate down speed and force can be adjusted.
• Spike nail can be designed bythe specifications or requirements, and the base can be designed with battery fixture.

Can be used to simulate the battery encountered external acupuncture / extrusion, the appearance of deformation or whether the internal chemical changes : The acupuncture / extrusion test equipment can be used to simulate the battery when the external acupuncture / extrusion, the appearance of deformation or whether the internal chemical changes, and per the customer needs with the temperature control box to test the external temperature. And with voltage / current or temperature sensor, the software can be used during the test for a variety of data monitoring. Because this test has a considerable risk, so the composition of the overall isolation box is made of anti-collision and heat-resistant material, and equipped with exhaust hole to eliminate the smoke and hot air generated by the battery acupuncture / extrusion . In addition, in order for monitor convenience and the safety of the testers, the isolation box can also be installed in accordance with customer demand, so as to achieve remote monitoring and operation, and can reduce the abnormal harm generated by the personnel in the use of the battery.

Pneumatic type acupuncture, extrusion battery test machine

• Machine can be designed per customer’s demand. Crush test and nail penetration test function two in one, pressure-type output.
• The top of the test box with explosion-proof transparent glass, easy to observe the test process, the rest of the surface with stainless steel plate for protection, the side reserved for test holes and pressure relief hole.
• Pinning and squeeze plate down speed and force can be adjusted.
• Spike nail can be designed by the specifications or requirements, and the base can be designed with battery fixture.

Because of the variety of test objects, the appearance is not the same, there are some square and round; some short and long; so often encountered different problemsin setup. After the customer provides the object for the measurement and mapping, we can manufacturein full compliance with any test items and can overcome the difficulties on the installation. This product can be customized according to needs.

Suitable for application in the production line, and with the rapid clamp, can be repeated for the same product for several tests.The advantages of rapid clamp itself can significantly shorten both the time to install the test items, and the education and training hour. So there are some advantages that make easy to use, quick to get started and shorten the installation time. This product can be customized according to needs.

A high efficient, reliable, and trustworthy device for quality control of all connectors, terminals, cables, buttons, relays, switches and other components, the device is designed as a good helper, so that the rate is no longer a problem.

Our storage facility is laced with all the modern amenities, required for maintaining high quality of the products. Also, we upgrade it on regular intervals to meet defined industry standards. Deeply rooted in NSB(Malaysia), we are indulged in the process of providing products to any required destination with ease.

HS 700 Portable Ultrasonic Detector is a 400MHz hardware sampling frequency, with a higher degree of waveform reduction. It can connect to the Internet through WIFI to achieve cloud detection, GSM positioning, remote real-time positioning via mobile phone APP, resistive touch screen, oil-proof and waterproof. Touch sensitive, touch-screenable instrument with B-scan detection function.

Performance

• 400Mhz sampling frequency Higher reduction degree
• Connect to Internet through WIFI , reach the cloud detection
• GSM Global Positioning , capable of real-time positioning by mobile phone APP
• Resistive touch screen, resistant of water and oil, sensitive touch
• With encoder B scan detection function

Technical parameters

• Transmit Pulse voltage
• Curve Display Mode Radio-frequency wave, wave demodulation (whole wave, negative and positive half wave demodulation)
• Display Screen : Highlight true color 640×480 Daylight readable LCD, Maximum A scan size  115.2×86.4 mm

Ultrasonic Thickness Gauge that we offer is manufactured and tested using the latest techniques with the objective of eliminating each and every possibility of defect. We are counted among the top Manufacturers and Suppliers of Ultrasonic Thickness Gauge. Our well-equipped production unit has enabled us to produce Ultrasonic Thickness Gauge in bulk at a time. Few words that better describe our gauge are strong in construction, corrosion resistant and dimensionally accurate.