Conveyor Belts

We offer a complete product range of Conveyor Belt for Cement Industry, Conveyor Belt for Power Plant, Heavy Duty Conveyor Belt, Conveyor Belts for Packing Industries and Conveyor Belt for Wood Industry

Conveyor Belt For Cement Industry

We, at VJIKKS ENGG POWER (M) SDN BHD, are progressing aggressively as a one stop Engineering Solution Company involved in the process of manufacturing, exporting and supplying Conveyor Belt for Cement Industry around the world. Conveyor belts are particularly suited to Cement industries where conveyor systems having inclined angles greater than 18 degrees and the material tends to roll back. To counter this, the conventional approach is to increase the speed of the conveyors. But, this approach will result in increased energy consumption. With our experience in tackling problems related to high inclines, we supply a specially developed and diverse range of Chevron and other profile belts. The belts have been specially designed with wear resistant covers and cleats to provide a high wear life. The special carcass design enables the frequent flexing these belts undergo in usage. We offer a wide range of different cleat designs / patterns, depending upon the type of material to be conveyed. The height of the cleat depends upon the lump size of the material to be conveyed and the angle of incline. These belts are used for Crushers, including mobile for stone aggregate handling, limestone conveying in cement plants, scrap handling, wood chips, etc.

Specifications

Common Widths : Available in different widths of Chevron Belt
Belt Length Range : `L-160m, `H-120m
Carcass Variety Available : EP
Common Belt Rating : 200 to 800 KN/M
No. of Plies : 2 ply to 4 ply
Rubber Cover Grades : M24, DIN-X, Y, HAR, SAR, HR, OR; special belts on request
Rubber Covers Thickness : Min. 3.0 mm top and 1.5 mm bottom or bare back
Rubber : Black
Surface Finish : Cleat on top Covers only
Edge : Cut Edge or Molded Edge
Splicing Method : Hot / cold splice joint / mechanical splice
Packing Available in : Palletized Packing

View Complete Details

Ask Latest Price & Details

Conveyor Belt For Power Plant

vjikks engg power (m) sdn bhd is one of well-known manufacturer, exporter and supplier of the finest conveyor belt for power plant. In coal fired power plants, one of the main hazards to which a conveyor system is prone to is fire. Since general purpose conveyor belts are combustible, in certain areas which are exposed to fire risk, we recommend the use of fire resistant belts. The effect of a fire entails a safety hazard for the personnel as well as potential financial loss caused due to damage to the installation and of course substantial production loss which follows any such breakdown. with the advancement in technology, it is possible to impart properties to conveyor belts so that in fact the propagation of the fire is arrested or limited at the source. This is done by using a combination of polymers, chemicals and additives which contribute to improving the fire retardant property of the conveyor belt. this can often be achieved without compromising the wear life of the conveyor belt as well. In order to cater to varying levels of fire resistance in line with various domestic and international standards, we supply a range of fire resistant belts. This range includes belts suited for underground use and specialized belts with low smoke and toxicity. Belts with added feature of heat and or oil resistant property are also available on request. specifications
common widths : 500 mm to 2000 mm
carcass variety available : ep nn pp
common belt rating : 200 to 2500 knm
no. Of plies : 2 ply to 6 ply
rubber cover grades : refer table
rubber covers thickness : minimum 1.0 mm to 20 mm
rubber : black
surface finish : smooth
edge : cut edge or molded edge
splicing method : hot splice joint mechanical splice
packing available in : cassette single roll
belt identification : unique product identification number (pin) at every 10m

View Complete Details

Ask Latest Price & Details

Heavy Duty Conveyor Belt

VJIKKS ENGG POWER (M) SDN BHD is one of the leading Manufacturers, Exporters and Suppliers of quality Heavy Duty Conveyor Belt. Steelflex belts are manufactured with a high tensile, heavy duty woven steel fabric using the proprietary Fleximat fabric. Vjikks Engg Power (M) SDN BHD is the pioneers in the design and development of Heavy Duty Conveyor Belt that is designed to perform in the following applications :

High tension conveyors
Long haul conveyors
Short, high speed feeder belts prone to rip and tear due to tramp material
Heat resistant belts prone to burn through
Heavy-duty elevator belts
Benefits of Heavy Duty Conveyor Belt
Conventional Steel cord belts do not offer longitudinal rip resistance
Lower break down costs since rip length is restricted by weft fabric
Suitable for smaller pulley diameters as compared to Steel Cord belts
Low elongation @ ref. load of 0.3% v/s 2.0%
Substitute for steel cord belts
Specifications
Ratings : 350 N/mm to 3150 N/ mm
Top Covers : 5mm and above
Bottom Covers : 3mm and above
Common Widths : upto 2000mm max
Edge : Molded Edge only
Splicing Method : Finger Splice as per Orientals advice
Belt Identification : Unique Production Identification
Number (PIN) at every 10m

View Complete Details

Ask Latest Price & Details

Conveyor Belts For Packing Industries

Being one of the leading Manufacturers, Exporters and Suppliers operating in the region, at VJIKKS ENGG POWER (M) SDN BHD, we are offering Conveyor Belts for Packing Industries. To suit to the needs of Packing Industries, belt is specially designed for transporting light weight goods, either in inclined or in horizontal planes. These belts are designed to transport either fragile material or packed goods, such as, glass, papers, bags, boxes or cartons etc. The deep impression top cover on the belt provides thousands of flexible gripping; these gripping generate the relief effect, absorbing any vibrations and impacts exerted on the materials and simultaneously prevent the material from slipping on high inclined conveyors. The belts are light in weight; move on either slider bed or on idler rollers. For slider beds, we manufacture these belts with our special bare back fabric construction. Special care is taken to ensure that there is no strike through of rubber on the bare side. These belts are suitable for Packing Industry, Bagging Plants, Food Packaging Industry, Fragile Goods Manufacturing / Packing Industries. However our belts are not suitable for conveying goods where the angle of incline is more than 35 degrees. Also conveying of sticky material and powder is not recommended.
Characteristics of the belt
Width : Up to 1500 mm
Ply : 2 plies to 3 plies
Belt Length Range : Standard length of 100 m
Carcass Variety Available : EP / NN
Carcass Strength Rating : 200 - 500
Rubber Cover Grades : M / N / DIN Y
Rubber Covers Thickness : min. 3.0 mm top cover, 1.5 mm bottom cover
Rubber : Black
Surface Finish : Top rough Top and Bottom with cover or Bare back
Edge : Cut Edge only
Splicing Method : Hot splice / Cold splice / Lacing
Packing Available : Single Roll

View Complete Details

Ask Latest Price & Details

Conveyor Belt For Wood Industry

VJIKKS ENGG POWER (M) SDN BHD is one of the leading Manufacturers, Exporters and Suppliers of quality Conveyor Belt for Wood Industry. Conveyor belts particularly suited to wood related industries, for various applications from conveying light weight wood chips to the heavy belt that withstands the impact of tree logs.
Specifications
Common Widths : 500 mm to 2000 mm
Carcass Variety Available : EP / NN
Common Belt Rating : 400 KN/M
No. of Plies : 3 ply or 4 ply
Rubber Cover Grades : Soft Wear Resistant Cover
Rubber Covers Thickness : Top cover between 5 to 10 mm, Bottom cover either Bare back or Slider Back
Rubber : Non marking, Green , Pinkish Red
Surface Finish : Smooth both sides or Large Diamond Profile
Edge : Cut Edge
Splicing Method : Hot splice joint / Mechanical splice
Packing Available in : Single Roll
Slowdown Belts : This belt has been designed to slow down Log deck movement by absorbing high speed of logs coming out of sizing machines and to simultaneously change the direction of the log. These Belts are made with a unique, soft wear resistant cover with non-marking and high traction properties. We offer these belts with bare back plies for easy sliding on metal surface. For providing higher traction, we also supply this belt with a proprietary, special molded profile for heavier duty applications. Timber Conveyor Belts : These belts are light weight, supple, 3 ply belts designed to work with small diameter pulleys. These belts have a bare back construction. Cover grades have excellent oil and weather resistant properties, to prevent oil swelling associated with carrying wood / chips with content of Pine sap or Terpene oil. These belts are supplied in non-marking compounds or in black covers, depending on client preference. Wood Chip Profile Belts : These belts have studs on the surface to prevent slide back of wood chips, barks on high inclined conveyors. Belts are normally 3 ply - 4 ply construction, having either bare back or having bottom covers. These belts are moderately oil resistant and black in color.

View Complete Details

Ask Latest Price & Details