Trilink Energy

Selangor, Malaysia

Our SpecializationMicrone specialized in manufacturing valves in Duplex, Super Duplex, Inconel, Monel, UNS N08926, UNS N07718, UNS N08825, UNS N06625, Hastelloy, Aluminium Bronze, 17-4PH.Special ProcessMetal to Metal contact by Stellite Overlay, Stellite Coating, Tungsten Carbide Coating, Chromium Carbide Coating through HVOF process & Electroless Nickel Plating. Application temperature range upto 7750 C

Design FeaturesPressure Balancing featureTwin seal, Lubricated, Non-Lubricated, Sleeve type PlugInverted plug type designStellite Cladded Plug & BodyDouble Isolation (DIPV)Valve could be supplied with ISO 5211 Flange foroperator installation.Material : NACE MR-0175

Design FeaturesDisc: Swing Type, Axial Piston Type, Dual plate Type.Operation: Self Weight, Spring Loaded, Counter Weight.Non Slamming featureSuitable for Horizontal & Vertical installationBolted bonnet & welded bonnetMaterial : NACE service MR-0175Our SpecializationMicrone specialized in manufacturing valves in Duplex, Super Duplex, Inconel, Monel, UNS N08926, UNS N07718, UNS N08825, UNS N06625, Hastelloy, Aluminium Bronze, 17-4PH.Special ProcessMetal to Metal contact by Stellite Overlay, Stellite Coating, Tungsten Carbide Coating, Chromium Carbide Coating through HVOF process & Electroless Nickel Plating. Application temperature range upto 7750 C

The principle of operation incorporated in the MICRONE triple offset valve is geometry in motion. Both the seat in the body and the seal on the disc are surfaces of a cone which is sectioned at an angle. The valve shaft is located slightly to one side of the seat center and above the plane of the seat. Its center of rotation is also somewhat is also somewhat offset from the axis of the imaginary cone which extends from the surface of the seat. When the valve is closed, the surface of the seal and the seat are in full contact at all points. Any efforts to try to further close the disc (rotating it into the seat) increases the sealing force and tightens the valve. This allows the valve to achieve a bi-directional seal. Opening the valve, or rotating the disc away from its seat, results in the seal moving away from the seat at all points, eliminating rubbing or sliding of the seating surfaces, thus avoiding wear. MICRONE valves feature true non-rubbing seating surfaces for long life and tight shutoff.

Our SpecializationMicrone specialized in manufacturing valves in Duplex, Super Duplex, Inconel, Monel, UNS N08926, UNS N07718, UNS N08825, UNS N06625, Hastelloy, Aluminium Bronze, 17-4PH.Special ProcessMetal to Metal contact by Stellite Overlay, Stellite Coating, Tungsten Carbide Coating, Chromium Carbide Coating through HVOF process & Electroless Nickel Plating. Application temperature range upto 7750 C