Hydraulic end assembly AH0501010500 AH35001-05.00 Sealing washer AH0501010203 AH35001-02.03 Hydraulic end assembly AH0801010500 AH34001-05.00 Sealing washer AH0801010203 AH34001-02.03 Hydraulic end assembly AH1001010500 AH33001-05.00 Sealing washer AH1001010203 AH33001-02.03 Exhaust filter assembly A more...
In Below Sealed Valves, conventional gland packing is replaced by a bellows cartridge welded to the valve bonnet and stem. A bellow is a long accordion-like tube. As the valve stem strokes, the bellows expands or compresses with the stroke movement. There are no sliding or rotating seals through which process more...
Nominal Diameter: 50 - 300mm Operating Pressure: 25 Bar Applicable Fluids: Water, Warm Water, Sea Water, Air & Weak Acid Flange Standard: PN25 Material: (Body) Cast Iron; (Disc) Stainless Steel more...
AMOT Model 4110 Overspeed Sensing Valve provides overspeed protection for engines and rotating equipment. The valve uses a precision flyweight speed sensor to vent a pneumatic or hydraulic signal (via a built-in two-way valve) at a pre-set RPM. more...
Get Quotes from Verified Suppliers
Our Specialization Microne specialized in manufacturing valves in Duplex, Super Duplex, Inconel, Monel, UNS N08926, UNS N07718, UNS N08825, UNS N06625, Hastelloy, Aluminium Bronze, 17-4PH. Special Process Metal to Metal contact by Stellite Overlay, Stellite Coating, Tungsten Carbide Coating, Chromium Carbide more...
Throttle Valves Throttle Valves for In-Line Assembly DV ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on sid more...
A check valve allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves work automati more...
No 4, Tkt. 1, Jalan Tengku Ampuan Zabedah G 9/ G,, Malaysia
Fin tubes widely used in Heat exchangers, Chill units, Condensers, Oil refineries and general heat exchanging units, etc. Material: C11000, C12000(Cu-DLP), C12200(Cu-DHP), C44300, C68700, C70400, C70600, C71500, LOW CARBON STEEL A179SA179 Temper: Finned section 12H, plian section M or whole tube M. Size range more...
Gate Valves are used extensively throughout the hydrocarbon, energy and process industries. Size: 2” up to 88“ (DN 50 up to DN 2200) Pressure Rating: ASME 150# to 2500# Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Du more...
Fully adjustable, 5-cycle control is efficient and reliable, delivering controlled upflow backwash, downflow brining and downflow service Versatile top or side mount is suitable for commercial or industrial applications Backwash capacity accommodates tanks up to 63" diameter Solid, lead-free brass* constructi more...
Volume based irrigation device, consisting of a water meter, a volume control dial and a double chamber valve contained in a single unit. The Dose-O-Mat line of automatic metering valves provides a reliable and economical solution for a wide variety of irrigation applications. A variety of models and sizes ar more...
Ideal for handling dry bulk material in gravity flow, dilute phase or dense phase pneumatic conveying applications. Enge Plas’ range of diverters are designed and engineered with two main principals in mind: extend the service life of the valve and perform maintenance without taking the valve out of line Ou more...
It is provided with injection site which has one way retreating valve (silicon tube) to facilitate extra medication and to prevent back flow. The valve is provided with specially designed cap incorporating a recessed plug with a protective skirt to effectively prevent contamination when the valve is not in us more...
-Foot valve is to be installed to prevent of harmful objects and reversal flow in the piping line. Excellent corrosion-resistance, chemical-resistance -The normal size of screwed type: 20mm-50mm -The normal size of flanged type: 20mm-200mm more...
HYDRAULIC DEVICES 669-26400200 SOLENOID VALVE RM2, 200.00 Item details SKU: 669-26400200 SOLENOID VALVE Stock: Stock available Manufacturer: KATO more...
Get Quotes from Verified Suppliers
Being a blue-chip firm in this arena, we have set strong tie-ups with the leading e-commerce merchants who work for us and guarantee safe and secure transactions. We are flexible enough in meeting the ever-evolving requirements of the customers as we have well-structured and capacious storage space. We effici more...
Our Thermostatic Mixing Valve is designed to prevent scalding and keep water temperature safe. Use of the valve has been shown to increase the availability of hot water by 40%. Once installed, the valve is low maintenance. Just set it and forget it.c more...
Established over 65 years ago, Clack has grown to become a world leader in the manufacture and distribution of water treatment products and components for residential and commercialindustrial applications use with sizes up to 3″ and flow rates up to 250 GPM (56.8 m3hr). Clack developed a line of water softe more...
Eratreat Engineering Sdn. Bhd.
10, Jalan Meranti Jaya 8, Meranti Jaya Industrial Park, 47200 Puchong, Selangor, Puchong 47200, Malaysia
To keep a strict check on the quality of the products, we have hired a team of quality analysts having rich domain experience. As a trusted name, we make use of only premium packaging material to pack the products in order to ensure their complete safety during transit. Moreover, our packaging experts strictl more...
MECHANICAL VALVE CASB can supply all types of Mechanical Valves which is covered all sizes and all materials. Just Contact us now for details. more...
1st Floor, K90A, Taman Idaman, Jalan Jakar, 24000 Kemaman, Terengganu, Malaysia
We are offering fluid dispensing valve. structure needle pressure medium pressure power pneumatic material stainless steel temperature of media medium temperature media adhesive place of origin japan model number av 801. more...
Related Products
Connect with us
