Industrial Chemicals #6047353

technical specification
melting point 105-110
melt viscosity @25c 30-50 cps
density@25 c 0.95 gcm3
acid value (mg kohg) nil
mw 1500-2000
penetration@25c 1.5-2 dmm
20 ft container 16 tons(with pallet)

Product Name: Isopropanol

Mol File: 67-63-0.mol

EINECS: 200-661-7

RESI-ANALYZED;isopropanol molecular biology

Spectrophotometry

CAS: 67-63-6

Chemical Properties:

mp -89.5 C

Water Solubility miscible

refractive index n20/D 1.377(lit.)

vapor density 2.1 (vs air)

vapor pressure 33 mm Hg ( 20 C)

FreezingPoint -89.5C

density 0.785 g/mL at 25 C(lit.)

BRN 35639

Fp 53

. Product name: Ethanol 96% min

2. Product Code: ENA

3. Quality standard

No Parameters Unit Specifications Test methods

1 Alcohol strength GL at 20 deg C %v/v Min 96 Alcoholmeter

for GL

2 Ester ethyl acetate ppm Max 10 GLC

3 Aldehyde as acetaldehyde ppm Max 10 GLC

4 Acetic acid Ppm Max 10 GLC

5 Methanol ppm Max 10 GLC

6 Total higher alcohols ppm Max 30 GLC

7 Fuse oil Ppm Max 10 AOAC959.05-05

8 Appearance Clear & Bright Visual

Note: Total higher alcohol = Iso-propanol + n-Propanol+ Iso-butanol + N-butanol+ Ter-butanol

Applications

1.production of paper making and fiber pulp;

2.production of soap, synthetic detergents and synthetic fatty acid as well as the refining of plant and animal oil;

3.as the desizing agent, scouring agent and mercerizing agent for cotton in textile and dyeing industries;

4.the production of borax, sodium cyanide, formic acid, oxalic acid, phenol and so on;

5.the refining of petroleum products and used in the drilling fluid of oil field in the petroleum industry;

6.as the acid neutralizer, peeling agent, decolorant and deodorant for food products in the food industry;

7.as alkaline desiccant

Calcium Sulphate Dihydrate is colorless columnar crystal or white crystalloid powder. 128 C lose 1.5 gesso to half hydrate and 163 C above be without water content. The relative density 2.32, melting point C (1450 without water content). Slightly soluble in hot water soluble in alcohols and most organic solvents.

Calcium Sulphate Dihydrate Specification

ITEMSTANDARD

Assay(on the dried base)min. 98.0%

Loss on drying19.0 %-23%

Flouridemax.0.003%

Arsenic (As)max. 2 mg/kg

Lead (Pbmax. 2 mg/kg

Seleniummax. 0.003%

Heavy metalsmax. 10 mg/kg

Calcium Sulphate Dihydrate Application

1. Commercial Baking Industry since most grains contain less than 0.05% calcium, the fillers are economical sources of supplemental calcium in enriched flour, cereals, baking powder, yeast, bread conditioners and cake icing, the gypsum products can also be found in canned vegetables and artificially sweetened jellies and preserves.

2. Brewing Industry

in brewing Industry, calcium sulfate promotes a smoother tasting beer with improved stability and a longer shelf life.

3. Soybeans Industry Calcium sulfate has been used in China for over 2, 000 years to coagulate soy milk to make tofu.C calcium sulfate is essential for certain kinds of tofu. Tofu made from calcium sulfate will be softer and smoother with a mild, bland flavor profile.

4. Pharmaceutical

For pharmaceutical applications, calcium sulfate is extensively used as a diluent because of it good flowability while also serving as a dietary calcium supplement

Potassium Sorbate Granular E202 Details
Potassium sorbate is the potassium salt of Sorbic Acid, chemical formula C6H7KO2. Its primary use is as a food preservative (E number 202). Potassium sorbate is effective in a variety of applications including food, wine, and personal care products.
Potassium sorbate is produced by reacting Sorbic Acid with an equimolar portion of potassium hydroxide. The resulting potassium sorbate may be crystallized from aqueous ethanol.

SPECIFICATIONS :-

FFA (as Palmitic) : 20% - 70%

M&I : 3% Max

TFM : 95% MIn

Colour : Yellow, Brown & Good Yellow

FullyrefinedParaffinWax58-60Application:

1.Candleproductionlikemolding, dipping, drawing, extrusion/pressing. 2. Polishestoimprovebuffability, toprovidesolventbindingandsolventretentionproperties. 3.RubberandTiresasmoldreleaseagents, plasticizersandlubricantsinrubber blends. 4. CosmeticsandPharmacytoactasa basecomponentinvariousformulations. 5.PaperCoatingformulationscoveringpackagingoffoodandnon-foodarticle

6.HotMeltAdhesivesasa cost-competitiveblendcomponent. 7.ChemicalIndustryasprocessingagents, rawmaterials, components.

soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated.

the hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature.

acid value 0.78 mg koh/g
color 0.5 r
moisture and volatile matter 0.01 %
melting point 53.8 deg c

Ammonium chloride

tech grade

purity: 99.5%min

white powder crystals

mainly used in tanning, dry cell, leather, plywood glue, dying, electrical plating.

Specification

Index

GB/T2946-2008

Ammonium Chloride %

(NH4CI)

99.5

Moisture %

0.7

Residue on Ignition %

0.4

Heavy Metal(Pb) %

0.0005

Sulphate %

0.02

1.Introduction of Palm Wax

Palm wax is not only a kind of natural, biodegradable raw material but a kind of renewable and inexhaustible resource.

Palm wax blends well with other vegetable and paraffin waxes.When blended with paraffin Wax, it can used up to

60% -80% especially for container candles . But the proportion is depend on different kind of moulds.So pls do a test to

ascertain the different proportion to each moulds. When it is making pillar candles, the portion should be reduced to less than 20%.

2. Palm Wax Product futures

1. Palm Wax

2. For making coating wax, polishing wax, color master batch

3. Higher softening point

4. Low viscosity

5.Flaky without agglomerating

3. Suggested usages

Using palm oil as the raw material, palm wax is fully natural, biodegradable, It is a renewable and inexhaustible resource.

In addition, it is a comparativelyenviroment-protecting biological wax.Except for the candle making, it is used as lubricant, waterproofing agent, polishing agent, etc.

Ethyl Acetate

One of very important organic chemical raw materials and widely used. Ethyl acetate as an important industrial solvent, it is mainly used in such as paintings, adhesives, ethylcellulose, leatheroid, malthoid colorant and synthetic fibers etc.

Ethyl acetate also used as an adhesive in the production of printing ink and Venetian pearl, used as a distillation agent in the production of medical use medicines and organic acid etc., and used as fruit essences such as pineapple and banana etc. and as perfume such as usquebaugh and butter etc.

Sodiumhydrosulfiteisakindofwhitesandcrystallizationorlightyellowpowderchemicals, meltingpoint300(decomposition), ignitiontemperature250, insolubleinethanol,

solubleinsodiumhydroxidesolution, andwillburnastrongreactionwhenmeetingwithwater.

1, Chemical Name:Magnesium Chloride

2, Molecular Formula: MgCl26H2O

3, Molecular Weight: 203.30

4, CAS: 7786-30-3

5, Character: Its white or gray flake, easily soluble in water. In wet air, its easy to get deliquesced. At high temperature, itll decompose to hydrogen chloride and magnesium oxide.

6, Usage: It can be used to make tofu (bean curd). Tofu with brine (solution of Magnesium Chloride) is far more tender and delicious than with gypsum. It also can be used as food additives in other food industries.

product

barium sulfate, baritite

density

2.284g / cm 3

color

white/black

package

plastic and paper compound wove bag, 25 kg per plastic woven bag; 1, 000 kg per pallet.

shape

powder particles crystal

sample

available

application

analytics reagents, also used in the electronics

powder coating, paint, coatings and industrial coatings, etc.

x-ray, gamma rays, and other fields.

plastic, rubber, chips, friction plate, ceramic, glass, cosmetics.

container size

20gp - 2.352(width) *2.385 ( height ) * 5.90 ( inside length ) meter

40gp - 2.352(width) *2.385 ( height ) * 11.8 ( inside length ) meter

40hq - 2.352(width) *2.69 ( width ) * 5.90 ( inside length ) meter

.

Appearance & Physical State:White to off-white powder.

Density:4.519 g/cm3

Melting Point:540C

Water Solubility:slightly soluble

Stability:Stable. Incompatible with reducing agents, copper, aluminium, alcohols, sulfur, phosphorus. Oxidant - keep away from combustible materials.

Storage Condition:Keep away from heat, sparks, and flame. Keep away from sources of ignition. Do not store near combustible materials. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

1. Maleic anhydride used in production of unsaturated polyester resin.

2. Maleic anhydride also is used in coating, pharmaceutics, agricultural, surfactant, additive of plastics, etc.

3. Maleic anhydride is main material of binary acid with four carbons, 1, 4-butanediol r-butyrolactone, tetrahydrofuran.