Post Your Requirement Menu

Welcome User

Our Products

  1. Safety Products 5 Products / Services available
  2. Ladies Sarees 3 Products / Services available
  3. Fencing Wire 2 Products / Services available
  4. Insulated Cable 1 Products / Services available
  5. Hospitality Service 1 Products / Services available
  6. Animal Clothing & Accessories 1 Products / Services available
  7. Wires 1 Products / Services available
  8. Electrical Cables & Wires 1 Products / Services available
  9. Nuts Bolts and Fasteners 3 Products / Services available
  10. Fibers 1 Products / Services available
  11. Mattress 1 Products / Services available
  12. Packaging Foam 1 Products / Services available
  13. HDPE Pipe 1 Products / Services available
  14. Safety Equipments 1 Products / Services available
  15. Building Hardware 4 Products / Services available
  16. Living Room and Plastic Furniture 3 Products / Services available
  17. Plastic Component 1 Products / Services available
  18. Other Products 6 Products available

Other Products / Services

We offer the best product range of Gabion, Rib Lath, Hy Rib, lattice girders and form tie.

Gabion

  • Standard Sizes 1m x 1m x 1m 1m x 1m x 0.5m 1m x 1m x 0.3m 2m x 1m x 1m 2m x 1m x 0.5m 2m x 1m x 0.3m

Gabion Gabion boxes are made of heavy duty hexagonal wire nettings Finish can be hot-dipped galvanized, galvanized aluminum alloy or PVC coated Filled with rock or rubble to economically and effectively construct earth retaining walls and erosion control structures KIMMU Brand Gabion Cages (Mesh 8) Size: 1 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm Heavy Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 2 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm Heavy Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 3 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm Heavy Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 1 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm Standard Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 2 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm Standard Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 3 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm Standard Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 1 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm Heavy Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 2 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm Heavy Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 3 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm Heavy Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 1 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm Standard Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 2 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm Standard Galvanized KIMMU Brand Gabion Cages (Mesh 8) Size: 3 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm Standard Galvanized

View Complete Details

Rib Lath

  • Size 610mm W X 2200mm L X 0.35mm thk

Rib Lath Expanded Galvd Rib Lath is Expanded Metal lath stiffened by longitudinal steel ribs, formed in the same sheet of metal. The mesh areas of the lath are expanded by cutting and stretching in the sheet of metal, the ribs being simultaneously roll-formed. The furring design of the mesh provides an excellent background plaster for construction of partitions, suspended ceilings and refurbishment works. The advantages of rib lath over metal lath is that the support centres can be increased or widened. Applications: Galvd Rib-Lath is extensively used: As a Plaster Backgroud for: – Partitions – Structural (Steel Work Encasement) – Suspended Ceiling – Arch Formation – Construction Joint for Shallow To refurbish damaged or aged masonry walls, Slab, Retrofiting work, etc. Installation: Galvd Rib-Lath must fixed with the apexes of the ribs in contact with the support or the backing. Galvd Rib-Lath should be lapped at the sides wire tied at intervals not exceeding 150mm. At the end of the sheets, the Galvd Rib-Lath should be overlapped with at least 100mm (4″ ).

View Complete Details

Hy Rib

Hy Rib Hy-Rib is an expanded metal sheet product, specifically developed for use as permanent formwork to concrete. The profile of the open mesh, in combination with the Hy-Rib tangs, allow the development of dense concrete nodules and indents on the face of the Hy-Rib, forming an enhanced mechanical key for the second phase pour. In the case of visible elements, the resulting Hy-Rib surface is suitable to receive a rendered or tiled finish. Hy-Rib is primarily used in construction joint applications but it is also used to form wall, beam & column surfaces and slabs soffits, where the formed surface will not be seen. For over 80 years Hy-Rib has been successfully used as permanent formwork on innumerable building & infrastructure projects, throughout the world. Hy-Rib has an enviable portfolio of technical data. Independent bodies have undertaken full scale testing programmes to determine and verify Hy-Rib’s effectiveness in forming construction joints. The result is a product with well defined engineering properties, established formwork pressure characteristics and measured improvements to the joint performance. Hy-Rib is certified for use as permanent formwork by the British Board of Agrément (BBA).

View Complete Details

lattice girders

Lattice Girders A lattice girder is a type of girder with a criss-crossed web design, such as in gardening lattices, between the two edges of the girder. It is manufactured using high strength steel wire which provides rigidity to the panel and enables it to bind easily with in-situ concrete which is poured later on site. They are lightweight and can be easily assembled on uneven floor and wall surfaces with few workers. The Lattice Girders are used mainly as reinforcement of prefabricated slabs and beams, where concreting is performed in two stages, offering the advantage of avoiding scaffolding and formwork needed in traditional construction. Therefore Lattice Girders are best suited when slab reinforcement is generally light, while at the same time fast and no-formwork construction is needed.

View Complete Details

form tie

  • Model Form Tie
  • Diameter (mm) (B) 9 (Yellow Zink Galvanized)
  • Length (mm) 250
  • Packing Quantity (Pcs/Ctn) 100

Assembly Of Form Tie The Form Tie system prevents breakage in the formwork, thus keeping concrete structures in good shape without discolouration. Besides ease of assembly and removal, the system saves construction costs as all parts are reusable except for the separator, which is casted into the wall.

View Complete Details

Wire Mesh Roll

  • KIMMU Ref. No. 610
  • Wire Diameter (mm) 2.00 – 2.50
  • Width (m) 1.80 – 2.00

Wire Mesh Roll Solid rolled format to provide exceptionally strong reinforcement for your construction needs.

View Complete Details

Tell Us What are you looking for? Will call you back

Contact Us

  • Tan
  • TL 60, Batu 2, Jalan Minyak Beku Batu Pahat, Johor, Johor, Malaysia