Bayan Lepas, Malaysia
Our Products
We offer the best product range of 3 High Power Reed Switch, Miniature Overmolded Reed Switch, Littelfuse Reed Switches, Miniature PCB Mount Reed Switch and Changeover Reed Switch.
A miniature, PCB mount reed switch 17.78mm x 4.32mm x 3.30mm (0.700" x 0.170" x 0.130") with a normally open contact. Contains molded stand-offs to allow board washing. Available with customer-defined sensitivity. Capable of switching up to 200Vdc at 10W. Available with a range of sensitivity options. Well suited for position and limit sensing, security, door and window alarm systems. Functions best with the 57045 actuator. Note: The 57045 actuator is sold separately.
Littelfuse Reed Switches 59050 datasheet Order Sample A small, PCB mount reed switch 22.86mm x 6.73mm x 4.57mm (0.900" x 0.265" x 0.180") with a choice of normally open, normally closed or changeover contacts. Contains molded stand-offs to allow board washing. Available with customer-defined sensitivity. Capable of switching up to 265Vac300Vdc at 10VA. Available with a range of sensitivity options. Well suited for position and limit sensing, security, door and window alarm systems. Functions best with the 57050 actuator. Note: The 57050 actuator is sold separately. Features: Molded stand-offs to allow board washing Hermetically sealed contacts Customer-defined sensitivitySuitable for mounting directly onto printed circuit boards Well suited for usage in high-moisture and contaminated environments Excellent for switching micro-controller logic level loads Applications: Position and limit switching Security
Littelfuse Reed Switches 59165 datasheet Order Sample A miniature overmolded reed sensor 16.00mm x 2.41mm x 2.41mm (0.630" x 0.095" x 0.095") with straight, staple-form, or gull-wing leads. Provided with normally open contacts. Capable of switching up to 200Vdc at 10W. Its package contains molded stand-offs to allow board washing. Available with a range of sensitivity options, including customer-defined sensitivity. Well suited for position and limit sensing, security, and doorwindow alarm systems. Functions best with the 57045 actuator. Note: The 57045 actuator is sold separately. Features: Two-part, magnetically-operated proximity sensor Gull-wing, straight, or staple-form lead options Molded stand-off to allow board washing Customer-defined sensitivity Suitable for reflow soldering Benefits: Well suited for usage in high-moisture and contaminated environments Reed contacts last for millions of operating cycles under micro-controller voltage and current logic-level loads Suitable for pick-and-place assembly Applications: Position and limit switching Security Door switch
A miniature overmolded reed sensor 16.00mm x 2.40mm x 2.40mm (0.630" x 0.094" x 0.094") with straight or gull-wing leads. Provided with normally open contacts. Capable of switching up to 200Vdc at 10W. Its package contains molded stand-offs to allow board washing. Available with a range of sensitivity options, including customer-defined sensitivity. Well suited for position and limit sensing, security, and doorwindow alarm systems. Functions best with the 57045 actuator. Note: The 57045 actuator is sold separately. Features: Two-part, magnetically-operated proximity sensor Gull-wing or straight lead options Molded stand-off to allow board washing Customer-defined sensitivity Suitable for reflow soldering Benefits: Well suited for usage in high-moisture and contaminated environments Reed contacts last for millions of operating cycles under micro-controller voltage and current logic-level loads Suitable for pick-and-place assembly Applications:Position and limit switching Security Door switch
Changeover Reed Switch A standard changeover switch with a 39.67mm long x 5.33mm diameter (1.562" x 0.210") glass envelope, with tungsten contacts capable of high voltage and power switching up to 500Vdc at 50W. Minimum breakdown voltage of 1000Vdc. Available sensitivity range of 50-80 AT. Insulation resistance of 1 Gigaohm minimum and contact resistance less than 500 milliohms. Ideally suited for security, limit sensing, industrial, white goods and automotive applications. Features: Changeover switch capable of switching 500Vdc or 1.5A at up to 50 Watts Minimum breakdown voltage of 1000Vdc Available sensitivity range of 50-80 AT Benefits: Hermetically sealed switch contacts are not affected by and have no effect on their external environment Can be used as changeover or normally closed contact Capable of switching global mains voltage Zero operating power required for contact closure Applications: Security Limit switching Industrial safety White goods
A sub-miniature, normally open switch with a 14.00mm long x 2.28mm diameter (0.551" x 0.090") glass envelope and longer than standard, flexible, easily formed leads, capable of switching 200Vdc at 10W. Available sensitivity range of 10-30 AT. High insulation resistance of 1010 ohms minimum and low contact resistance of less than 100 milliohms. Ideally suited for signal switching applications. Also suitable for reed relays, security, metering, limit sensing, telecom, office equipment and household appliances.ormally open switch Longer than standard, easily formed leads Capable of switching 200Vdc or 0.5A at up to 10 Watts Available sensitivity range of 50-80 AT Benefits: Hermetically sealed switch contacts are not affected by and have no effect on their external environment Soft leads enable reliable hand forming Zero operating power required for contact closure Excellent for switching micro-controller logic level loads Applications: Reed relays Security Limit switching Telecom Office equipment Household appliancesb
Littelfuse Reed Switches HA15-2 datasheet Order Sample A sub-miniature, normally open switch with a 15.24mm long x 2.28mm diameter (0.600" x 0.090") glass envelope. Capable of high voltage switching of 265Vac at up to 20VA. Available sensitivity range of 17-33 AT. High insulation resistance of 1010 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relays, security, metering, limit sensing, telecom and office equipment applications. Will handle light inductive loads with no suppression circuitry and is capable of switching global mains voltage. Features: Normally open switch capable of switching 265Vac or 0.35A at up to 20 Volt-Amperes Minimum breakdown voltage of 400Vdc Available sensitivity range of 17-33 AT Benefits: Hermetically sealed switch contacts are not affected by and have no effect on their external environment Capable of switching global mains voltage Zero operating power required for contact closure Applications: Reed relays Security Limit switching Industrial safety Telecom Office equipment
A miniature, normally open switch with a 19.69mm long x 2.84mm diameter (0.770" x .112") glass envelope. Capable of switching up to 200Vdc at 50W. It is rated to carry 3A and switch 1.5A. Available sensitivity range of 22-43 AT. High insulation resistance of 1010 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for limit sensing, telecom, office equipment and automotive applications. Will handle light inductive loads with no suppression circuitry. Features: Normally open switch capable of switching 200Vdc or 1.5A at up to 50 Watts Available sensitivity range of 22-43 AT Benefits: Hermetically sealed switch contacts are not affected by and have no effect on their external environment Zero operating power required for contact closure Applications: Limit switching Telecom Office equipment Light inductive loads
A sub-miniature, normally open switch with a 15.24mm long x 2.54mm diameter (0.600" x 0.100") glass envelope. Capable of switching 200Vdc at 20W with close-differential characteristics. Available sensitivity range of 17-38 AT. High insulation resistance of 1010 ohms minimum and contact resistance of less than 100 milliohms. Available in surface mount version (MLSM-4). Ideally suited for reed relays, security, metering, limit sensing, telecom and office equipment applications. Will handle lamp loads up to 2W @ 14V with no suppression circuitry.Low closeopen hysteresis (close differential) Normally open switch capable of switching 200Vdc or 1.0A at up to 20 Watts Available sensitivity range of 17-38 ATHermetically sealed switch contacts are not affected by and have no effect on their external environment Zero operating power required for contact closure
A miniature, normally open switch with a 19.69mm long x 2.66mm diameter (0.775" x 0.105") glass envelope. Capable of high voltage switching of up to 1000Vdc at 1mA. Available sensitivity range of 17-38 AT. High insulation resistance of 1012 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relay high breakdown voltage applications, security, metering, limit sensing, telecom and office equipment and automotive applications. Features: Normally open switch capable of switching 1000Vdc up to 1mA Minimum breakdown voltage of 2000Vdc Available sensitivity range of 17-38 AT A miniature, normally open switch with a 19.69mm long x 2.66mm diameter (0.775" x 0.105") glass envelope. Capable of high voltage switching of up to 1000Vdc at 1mA. Available sensitivity range of 17-38 AT. High insulation resistance of 1012 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relay high breakdown voltage applications, security, metering, limit sensing, telecom and office equipment and automotive applications. Features: Normally open switch capable of switching 1000Vdc up to 1mA Minimum breakdown voltage of 2000Vdc Available sensitivity range of 17-38 AT A miniature, normally open switch with a 19.69mm long x 2.66mm diameter (0.775" x 0.105") glass envelope. Capable of high voltage switching of up to 1000Vdc at 1mA. Available sensitivity range of 17-38 AT. High insulation resistance of 1012 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relay high breakdown voltage applications, security, metering, limit sensing, telecom and office equipment and automotive applications. Features: Normally open switch capable of switching 1000Vdc up to 1mA Minimum breakdown voltage of 2000Vdc Available sensitivity range of 17-38 AT A miniature, normally open switch with a 19.69mm long x 2.66mm diameter (0.775" x 0.105") glass envelope. Capable of high voltage switching of up to 1000Vdc at 1mA. Available sensitivity range of 17-38 AT. High insulation resistance of 1012 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relay high breakdown voltage applications, security, metering, limit sensing, telecom and office equipment and automotive applications. Features: Normally open switch capable of switching 1000Vdc up to 1mA Minimum breakdown voltage of 2000Vdc Available sensitivity range of 17-38 AT.A miniature, normally open switch with a 19.69mm long x 2.66mm diameter (0.775" x 0.105") glass envelope. Capable of high voltage switching of up to 1000Vdc at 1mA. Available sensitivity range of 17-38 AT. High insulation resistance of 1012 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relay high breakdown voltage applications, security, metering, limit sensing, telecom and office equipment and automotive applications. Features: Normally open switch capable of switching 1000Vdc up to 1mA Minimum breakdown voltage of 2000Vdc Available sensitivity range of 17-38 AT
Littelfuse Reed Switches MACD-14 datasheet Order Sample A sub-miniature, close-differential, normally open switch with a 14.00mm long x 2.28mm diameter (0.551" x 0.090") glass envelope capable of switching 200Vdc at 10W. Available sensitivity range of 10-30 AT. High insulation resistance of 1010 ohms minimum and low contact resistance of less than 100 milliohms. Available in surface mount version (MASM-14). Ideally suited for position, proximity, float position sensing for liquid level, industrial controls, office equipment, home appliance, and telecom applications. Features: Low closeopen hysteresis (close differential) Normally open switch capable of switching 200Vdc or 0.5A at up to 10 Watts Available sensitivity range of 10-30 AT Benefits: Hermetically sealed switch contacts are not affected by and have no effect on their external environment Zero operating power required for contact closure Excellent for switching micro-controller logic level loads Applications: Position sensing Security
Littelfuse Reed Switches HA15-2 datasheet Order Sample A sub-miniature, normally open switch with a 15.24mm long x 2.28mm diameter (0.600" x 0.090") glass envelope. Capable of high voltage switching of 265Vac at up to 20VA. Available sensitivity range of 17-33 AT. High insulation resistance of 1010 ohms minimum and contact resistance of less than 100 milliohms. Ideally suited for reed relays, security, metering, limit sensing, telecom and office equipment applications. Will handle light inductive loads with no suppression circuitry and is capable of switching global mains voltage.Normally open switch capable of switching 265Vac or 0.35A at up to 20 Volt-Amperes Minimum breakdown voltage of 400Vdc Available sensitivity range of 17-33 AT Benefits: Hermetically sealed switch contacts are not affected by and have no effect on their external environment Capable of switching global mains voltage Zero operating power required for contact closure Applications: Reed relays Security Limit switching Industrial safety
AlNiCo-5 magnet in a rectangular package with mounting clips to facilitate easy installation onto printed circuit boards. Overall dimensions of 17.78mm L x 3.30mm W x 4.32mm H. Recommended for use with the 59045 overmolded reed switch
AlNiCo-5 magnet in a rectangular package with mounting clips to facilitate easy installation onto printed circuit boards. Overall dimensions of 22.86mm L x 4.57mm W x 4.57mm H. Recommended for use with the 59050 overmolded reed switch
The 59170 is a sub-miniature overmolded reed switch 11.43mm x 2.29mm x 2.29mm (0.450” x 0.090” x 0.090”) with either straight or Gull Wing leads. It has normally open contact and capable of switching up to 200Vdc at 10W. Two-part magnetically operated proximity switch • Gull Wing, leaded • Tape and reel option • Solder reflow capable • Thermoset overmolded material • RoHS compliant Certified for use in North American Hazardous Locations: Class I, Division 2 and Zone 2 • ATEX certified for use in European explosive atmospheres: II 3 G Ex nC IIC Gc• Suitable for pick and place • No standby power requirement • Operates through non-ferrous materials such as wood, plastic or aluminium • Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Applicati
We have a wide array of sensor output options such as reed and Hall effect digital output, single- and multi-point reed ladder fluid level measurement, ratio-metric output for rotary angle and linear measurement using Hall effect devices, and speed and direction sensing. Types of Customization: Modifications to existing standard product packages, such as adding connectors or changing wire size or length, as well as offering special reed switch sensitivities, custom lead forming and bending or modifications to bare reed switches Fully new custom sensor package designs andor circuitry Magnetic circuit (actuator magnet and sensor) design for a variety of applications See our full range of sensor manufacturing process capabilities
