Our Products
Laboratory Equipments
2 Products availableFilters & Filtration Systems
2 Products availableMirrors, Glassware & Glass Artware
1 Products availableLab Instrument
1 Products availableChemical Reactors & Process Tanks
1 Products availableSurgical Needles & Scissors
1 Products availableWe are a reliable name when it comes to high quality Microbial Bioreactor at competitively low prices. We are backed by a quality control wing that strictly check the lot at all stages right from the production to the final dispatch.
Features :
We are a leading name offering the best in class and qualitative array of Plastic Vacuum Filter. We have a wide supply chain network that enables us to make delivery of consignments within the stipulated time.
Feature :
Detail Description :
Technical Parameter
Main Material | GPPS | GPPS | GPPS |
---|---|---|---|
Filter Upper Cup Capacity (ml) | 150 | 250 | 500 |
Full Unit Overall Height | 156 | 200 | 245 |
Filter Diameter (mm) | 50 | 50 | 75 |
Working Volume (ml) | 150 | 250 | 500 |
Hold-up Volume (ml) | 3 | 3 | 3 |
Linker and Cap Material | ABS | ABS | ABS |
Fitting Outlet (mm) | 45 | 45 | 45 |
Maximum Operating Temperature (oC) | 45 | 45 | 45 |
We are offering excellence in the form of Homogenizer to enhance the buyers' content. To provide complete satisfaction to the customers, we offer only defect-free range of products that are tested against varied quality parameters.
Specification
WT –130 Homogenizer | WT ––500 Homogenizer | ||
---|---|---|---|
Working Volume (ml) | 0.1 -250 ml | 100 – 40,000 ml (High Speed Mixer) 0.2 – 8,000 ml (Disperser & Homogenizer |
|
Motor Type | Universal motor, 130 Watt | Universal motor, 500 Watt | |
Voltage / Frequency | 110-120V / 60Hz, 220-240V / 50-60Hz |
||
Electrical Plug Type | UK Plug, US Plug, European Plug, China CCC Plug | ||
Speed Range (rpm) | 8,000 – 30,000 | 10,000 -30,000 | |
Speed Control Type | Dial knob 6 stage | ||
Noise Emission (Drive only) | < 54 dB (A) at 30,000 rpm | < 72dB (A) at 30,000 rpm | |
Dimension L x W x H / (mm) | 250 x 250 x 400 | 250 x 250 x 700 | |
Weight (kg) | 0.6 kg (without stand) 1.6 kg (with stand) |
8.0 kg | |
Operating Environment | 0 - 40oC, 95% rel. humidity | ||
Protection Class | IP20 | ||
Certified Standards | 89/336EEC,72/023/EEC,EMC acc. IEC/ EN 61000 – 6 – 2/3, Safety acc. IEC/EN 61010 – 2 - 51 | ||
Container Type | 0.5ml Eppendorf tubes 50ml tubes, 100ml tubes, 250ml tubes |
||
Warranty | 2 years – spare part due to manufacturing defects | ||
Sterilization Method | All | ||
PH Range | 42413 | ||
Suitable for solvents & abrasive substances | Yes | ||
Ultimate Finess, Suspensions & Emulsion | Suspension - 10-15 Emulsion - 1-10 |
Buyers prefer us for our practice of delivering the orders within the pre-decided time frame. We are backed by a quality control wing that strictly check the lot at all stages right from the production to the final dispatch.
Features And Benefits : Each vacuum filtration station has an individual control valve Stainless steel manifold construction (SS 316L) 1, 3 or 6 unit configuration Glass funnel available
Applications : Biochemical-pharmaceutical sanitation test Water quality analysis Food & beverage and science research
Specification
Membrane Filtration Assembly – Single Unit | |||
---|---|---|---|
Clamp | External clamp | Inbuilt clamp | |
Size / Diameter | 47mm | ||
Funnel Capacity | 250ml | 250 – 500ml | |
Flask Capacity | 1000ml | 1000 – 2000ml | |
Membrane Filtration Assembly – Three Places | |||
Clamp | External clamp | Inbuilt clamp | |
Size / Diameter | 47mm x 3 | ||
Funnel Capacity | 250ml x 3 | 250 – 500ml x 3 | |
Flask Capacity | 1000ml x 1 | 1000 – 2000ml x 1 | |
Membrane Filtration Assembly – Six Places | |||
Clamp | External clamp | Inbuilt clamp | |
Size / Diameter | 47mm x 6 | ||
Funnel Capacity | 250ml x 6 | ||
Flask Capacity | 2000ml x 1 |
Every item in our range is manufactured utilizing premium supplies sourced from renowned traders. Therefore, our products are reliable. As we are recognized as a dependable name in Kuala Lumpur(Malaysia), we are capable of reaching any nook and corner with ease.
Features And Benefits :
Applications : Widely used for chemistry analyses Water quality analyses Foodstuffs and beverage test Science research and so on Vacuum filter aqueous, organic or corrosive liquids for particulate contamination analysis It is recommended for HPLC solvent filtration and it has the function of outgas to guarantee the clean of mobile Phase and avoid the blockage of HPLC liquid flow path
Specification
Membrane Filtration Assembly – Single Place | |
---|---|
Size / Diameter | 25 - 90mm |
Funnel Capacity | 25 - 1000ml |
Flask Capacity | 250- 5000ml |
Membrane Filtration Assembly – Three Places | |
Size / Diameter | 47mm x 3 |
Funnel Capacity | 250ml x 3 |
Flask Capacity | 1000ml x 1 |
Membrane Filtration Assembly – Six Places | |
Size / Diameter | 47mm x 6 |
Funnel Capacity | 250ml x 6 |
Flask Capacity | 2000ml x 1 |
We abide by the strict delivery policies and thus, we ensure that the products are sternly packed and delivered on time. Our organization is a well-known name in Kuala Lumpur(Malaysia), reputed for supplying the finest range of the product at the lowest prices.
Specification
Nvlon | PTFE | PVDF | PES | |||||
---|---|---|---|---|---|---|---|---|
Product | Malny2522N | Malny2545N | Malpt2522N | Malpt2545N | Malpv2522N | Malpv2545N | Malpes2522N | Malpes2545N |
Filtration Precision | 0.22μm | 0.45μm | 0.22μm | 0.45μm | 0.22μm | 0.45μm | 0.22μm | 0.45μm |
Filter Media | Nylon66 membrane | Nylon66 membrane | PTFE membrane | PTFE membrane | PVDF membrane | PVDF membrane | PES membrane | PES membrane |
Shell Material | Polypropylene | Polypropylene | Polypropylene | Polypropylene | Polypropylene | Polypropylene | Polypropylene | Polypropylene |
Product Appearance | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
*Dimension Size (mm) | Ф25mm | Ф25mm | Ф25mm | Ф25mm | Ф25mm | Ф25mm | Ф25mm | Ф25mm |
Working Temperature | ≤ 60oC | ≤ 60oC | < 60oC | < 60oC | < 60oC | < 60oC | < 60oC | < 60oC |
Working Pressure | ≤ 500KPa | ≤ 500KPa | <500KPa | <500KPa | <500KPa | <500KPa | <500KPa | <500KPa |
Filtration Area | ≥ 3.9 cm2 | ≥ 3.9 cm2 | ≥ 3.9 cm2 | ≥ 3.9 cm2 | ≥ 3.9 cm2 | ≥ 3.9 cm2 | ≥ 3.9 cm2 | ≥ 3.9 cm2 |
Bubble Point (MPa) | ≥0.30Mpa(25oC) | ≥0.16Mpa(25oC) | ≥0.12Mpa(25oC) | ≥0.07Mpa(25oC) | ≥0.06Mpa(25oC) | ≥0.05Mpa(25oC) | ≥0.41Mpa(25oC) | ≥0.26Mpa(25oC) |
Sample Volume (ml) | <14 | <14 | <14 | <14 | <14 | <14 | <14 | <14 |
Holdup Volume (μl) | <60 | <60 | <60 | <60 | <60 | <60 | <60 | <60 |
Endotoxin | ≤ 0.25EU/ML | ≤ 0.25EU/ML | ≤ 0.25EU/ML | ≤ 0.25EU/ML | ≤ 0.25EU/ML | ≤ 0.25EU/ML | ≤ 0.25EU/ML | ≤ 0.25EU/ML |
Not only we present excellent products, but we are also flexible enough to make superfast deliveries and within the promised time. We have successfully emerged as a distinguished supplier of HPLC consumables that is highly demanded amidst the customers.
Specification
Septa | Description | |
---|---|---|
ND8 | White/Red PTFE, White/Red Silicone septa, Ф8*1.5mm | |
Pre-slit Red/Blue PTFE, Red/White Silicone septa, Ф8*1.5mm | ||
ND9 | White/Red PTFE, White/Red Silicone septa, Ф9*1mm | |
Pre-slit White/Red/Blue PTFE, Red/White Silicone septa, | ||
ND10 | White/Red PTFE, White/Red Silicone septa | |
ND11 | White/Red/Blue PTFE, White/Red Silicone septa, Ф11*1mm | |
Pre-slit White/Red/Blue PTFE, Red/White Silicone septa, Ф11*1mm | ||
ND13 | Nature/White/Red PTFE, Nature/Red/White Silicone septa, Ф13*1.5mm | |
ND18 | Blue PTFE, White Silicone septa Ф17.5*1.5mm | |
ND20 | White/Nature PTFE, White/Nature/Blue/Yellow Silicone septa | |
Caps | Description | |
ND8 | Black/White screw polypropylene cap, 5.5mm centre hole Ф8 | |
ND9 | Blue short screw-thread polypropylene cap, closed-top/6mm centre hole Ф9 | |
ND10 | Black screw polypropylene cap, 7mm centre hole Ф10 | |
ND11 | Nature/Blue/Red snap-top polypropylene cap, 6mm centre hole Ф11 | |
Crimp-top aluminium cap, 5.5mm centre hole Ф11 | ||
ND13 | Black screw polypropylene cap, closed-top/8.5mm centre hole | |
ND18 | Magnetic precision screw-thread metal cap, 8mm centre hole | |
ND20 | Crimp-top/ blue magnetic aluminium cap,10mm centre hole | |
Vials | Description | |
ND8,ND9,ND10,ND11 | 2ml vial, clear/amber, with/without label | |
ND13 | 4ml vial, clear/amber, with/without label | |
ND18 | 10/20 ml vial, clear, round bottom 22.5*46/75.5mm | |
ND20 | 10/20 ml vial, clear, flat bottom 22.5*46/75.5mm | |
Others | Description | |
Micro-Inserts | 150/250 μl insert with mandrel interior and polymer feet, 29*5mm; ND8/ND9 vials | |
250/300 μl Micro-insert, clear glass, flat bottom, 31*5/6mm; ND8/ND9 vials | ||
Shell Vial | 1ml shell vial, 1st hydrol glass, clear/amber, 8mm PE-Plug, soft, without insertion 8.2*40mm |
We abide by the strict delivery policies and thus, we ensure that the products are sternly packed and delivered on time. If you are interested in obtaining Maximus Series Humidity Chamber at market leading prices, we are its responsible and responsive suppliers.
Technical Specifications
-- | M200 | M450 | M900 | M1400 | M2000 |
---|---|---|---|---|---|
External Dimensions | 1,480 x 720 x 790 (mm) | 2,030 x 760 x 1,020 (mm) | 2,030 x 1,420 x 1,020 (mm) | 2,030 x 1,780 x 1,070 (mm) | 2,070 x 2,200 x 1,230 (mm) |
Internal Dimensions | 660 x 510 x 610 (mm) | 1,230 x 560 x 610 (mm) | 1,230 x 1,220 x 610 (mm) | 1,610 x 1,320 x 660 (mm) | 1,610 x 1,700 x 740 (mm) |
Internal Volume (Liters) | 205 | 420 | 915 | 1403 | 2025 |
Temp. Range | - | - | 20 - 50oC | - | - |
Temp. Uniformity | - | - | ± 2oC | - | - |
Humidity Range | - | - | 50 – 90% RH | - | - |
Humidity Uniformity | - | - | ± 5% RH | - | - |
Shelving | Up to 2 shelves | Up to 7 shelves | Up to 7 shelves | Up to 9 shelves | Up to 9 shelves |
Weight | Approx. 280kg | Approx. 380kg | Approx. 500kg | Approx. 600kg | Approx. 750kg |
Electrical Connection | Single-phase + neutral + earth + 240V AC, 5A | 3-phase + neutral + earth, 415V AC, 8A | 3-phase + neutral + earth, 415V AC, 11A | 3-phase + neutral + earth, 415V AC, 12A | 3-phase + neutral + earth, 415V AC, 13A |