Welding Industries (Malaysia) Sdn Bhd

Perak, Malaysia

• SeriesTA FEEDER

WIM Products - Wire Feeders TA FEEDER View other products in this category: 1 2 3 4 Product Quick Specifications: Related models : TA351i , TA501i

• Frequency50Hz / 60Hz
• Dimension540 x 1005 x 890 (mm)
• SeriesTA301i / TA501i
• Generator36.2 kVA

TA351i and TA501i are designed after throughout research and careful consideration to meet the requirements for the automotive body repairs and light production industry. Problems caused by “Burn Through” are common in the light gauge metal welding by the MIG process has been eradicated with the TA351i and TA501i. This is done through better circuitry in the PCB, good quality rectification components and effective wire feeder. Finally, careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings enable us to achieve a greater output with maximum efficiency for this class of power source. Welds: Cast Iron Steel Stainless Steel Aliminium Copper Brass Typical Usage: Automobile Manufacturing Fabric Plate Work Construction Metalworks Ship Building ADVANTAGES OF TA301i AND TA501i Simple control with “clean” appearance for easy operations. Built with front moveable wheel for easy moving. Thermostatic and electronic protection from current over-load. Complete set with internal wire feeder.

• Weight910kg
• SeriesALPHAWELD 500D
• Dimension Power Unit (W x L x H)1380mm X 860mm X 1710mm

ALPHAWELD 500D is the most rugged and reliable diesel welding machine that we had ever built for heavy industrial use. Every component in this machine is engineered and built to ensure ultimate reliability in the most punishing condition. Engine drive is considered the best heavy duty machine all round and its generator fuel consumption is lower compare to other conventional source Welds Materials: Typical Usage: • Stainless Steel • Fabrication • Aluminium • Construction • Copper • Ship Building • Brass • Piping • Titanium • Off Shore • Casting • Structural Steel • Mining Advantages: - Portability, Reliability and Versatility - Superior Arc Performance - Powered by Deutz Engine - 2 years limited warranty Rated Output Current 500A Voltage 40V Duty Cycle 50% Output Range 5 – 500A CC 15-48V CV Engine Type Deutz F3L – 912 Diesel Generator Output 30KVA No. of Cylinder 3 Horsepower & Speed 44 @ 1800 RPM Dimension Power Unit (W x L x H) 1380mm X 860mm X 1710mm Weight 910kg

• Weight21KG
• Dimesion(mm)470 x 240 x 370
• Power Capacity7.3KVA

WELDS:- - Steel - Stainless Steel - Titanium - Brass TYPICAL USAGE: - ToolDie Repair - VesselTank Fabrication - Train - Automative - AirplaneAerospace FEATURES: - Inverter Mosfet Technology - Portable Design - High Efficiency and Enery Saving - Easy Arc Starting and Small Spatter - Durable

• Weight72kg
• Voltage220V – 240V
• KVA7.5
• Welding Range @ 50 -210A30A ~ 210A
• SeriesWIM MIG (GMAW): MIG210S

MIG 210S is designed with throughout research on light industries usage and automotive industries to arrive at a reliable machine to meet the requirements for the industries. The problem caused by “Burn Through” is common in the light gauge metal welding by the MIG process has been eradicated with MIG 210S. This is done through better circuitry in the electronic board, good quality rectification components and effective wire feeder. Finally, with careful insulation during transformer construction, with high quality lamina plates as the iron core and superior primary and secondary windings process enable us to achieve a high output with maximum efficiency for this class of power source. Features: - The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. - The MIG 210S is with internal wire feeder. - The MIG 210s has a 2 steps voltage selection. This MIGWELD welding characteristics are excellent both in CO2 and mixed gas. - Better welding parameters 0.6mm – 1.6mm (Min 30amps – Max 500amps). - Heavy duty chassis construction. - Double thermal protection for transformer and rectifier. - Ergonomic and value added features. (Tool container, torch holder and gas tray holder).

• SeriesMIG 210SEF
• Wire Feeding SpeedMeter/min
• Primary Supply50/60hz

WIM Products - MIG (GMAW) MIG 210SEF View other products in this category: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (Click on the pictures above to enlarge) Product Quick Specifications: * Input Voltage : 220240V * Input Current : 33A * Welding Current : 30 ~ 210A * Duty Cycle : 30% * Weight : 65Kg * Dimensions (mm) : 450 x 820 x 720 Product Full Specifications: Features - The MIGWELD series are easy to adjust. Coarse and fine voltage steps are clearly marked on the power source, providing easy control and quick value setting. - The MIGWELD 210SEF has 10-steps. It had continous, spot and stitch welding to facilitate different kind of welding environment. These MIGWELD`s welding characteristics are excellent. both in CO² and mixed gases. - Digital Amp and Volt display meter. - Better welding parameters 0.6mm - 1.6mm (Min 30 amps - Max 500 amps). - Heavy duty chassis construction. - Double thermal protection for transformer and rectifier. - Ergonomic and value added features. (Tool container, torch holder and lower gas tray holder).