Our Products #1624341

SDT270 Ultrasound Features
Measures ultrasound, vibration, RPM, humidity and temperature from one instrument
Two channel inputs to connect ultrasound and multifunction sensors with accessories simultaneously
Unmatched accuracy and repeatability for reliable trending and analysis in ultrasound detection and measurements
Upgradeable firmware to grow with your needs
Planned and Conditional Survey modes to guide you logically through your plant
Device and software available in six languages (EN, FR, DU, GE, ES, IT)
IP-addressable to access Internet support and training

SDT200 Ultrasound Features
Built-in ultrasound sensor
Built-in temperature sensor with a laser pointer for pinpoint accuracy
Wide range of available airborne and contact sensors
Digital measurement display
Intuitive navigation with icon-based menu
Four condition indicators for more ways to interpret data
Predefined node tree with 4, 000 measurement points
DataDump software transfers data to PC
Available in ATEX version
Device and software available in six languages (EN, FR, DU, GE, ES, IT)

Shaft alignment fast and efficient with SHAFTALIGN OS3

Alignment of horizontal, vertical and flange-mounted machines
Easy to use with Autoflow
Automatic measurement mode Active Clock eliminates user error
Automatic evaluation of alignment condition with smiley
Flip machines functionality
Save reports as PDF directly onto a USB stick
Bluetooth communication included
Product Description

Without overstretching your budget, SHAFTALIGN OS3 ideally combines intuitive operation and accuracy for precision shaft alignment of rotating machinery.
OS3 features a sensor with an HD XL detector and a high precision MEMS inclinometer. The Bluetooth module is included and the computer has an integrated rechargeable battery.
The system's intuitive Autoflow capability guides the user step by step to measure the machinery alignment condition. All relevant alignment results are graphically displayed on one screen. The ambient light compensation allows measurements even in direct sunlight.
With TolCheck, smiley symbols clearly indicate the alignment status so that there is no need to interpret the results.
With the innovative Active Clock measurement mode, only 3 to 4 readings over a rotation angle of less than 70 are required to achieve a precision alignment.

Vertical and horizontal machine corrections are monitored live on the screen.
SHAFTALIGN is easily extendable through the activation of powerful options as the alignment requirements grow.
PDF reports can be generated and directly saved from the system onto a USB stick.
Our alignment software is used for preparing, analyzing, archiving measurement files and printing professional reports.

Flatness and level made easy with a self-levelling and spinning laser

Measure flatness, straightness, parallelism, perpendicularity and level of flanges and foundations
Efficient and easy one-man operation with self-leveling and rotating laser
Laser range dia. 200 m, sensor measurement range 70 mm
PC software for measurement analysis and professional reporting
Powerful software functionalities to compare two surfaces, e.g. in a press, and to extend the measurement range for large surfaces
Integrated wireless communication
Product Description

LEVALIGN expert uses a horizontally and vertically self-leveling spinning laser with a 100-meter measurement range in conjunction with a 70-mm range sensor. It ensures easy one-man operation for wide-ranging flatness and level measurement tasks.
Wireless communication between sensor and ROTALIGN Ultra computer transfers measurement data for analysis and evaluation of surface profile.
In addition to measurement analysis and professional reporting, use ALIGNMENT CENTER, the Windows based software to measure an infinite number of points over large surfaces with the splice function and to compare surfaces on two different planes.
LEVALIGN expert is the ideal package for OEMs and companies who offer full maintenance services to improve machine running condition and productivity.

Precision Meets Connectivity

Tablet-like capacitive touchscreen with 3D display
Extremely durable with strengthened glass screen and tough housing
Inbuilt mobile connectivity: RFID, Wi-Fi, Bluetooth and camera
Cardan shaft alignment with shaft in place
Vertical machine alignment with vertiSWEEP
Soft foot diagnosis
High measurement quality with intelliSWEEP, intelliPASS and intelliPOINT
Monitor relative machine positional changes continuously with Live Trend
Vibration Spot Check to measure overall values
ALIGNMENT RELIABILITY SOFTWARE 4.0 software with cloud data transfer
*included in the 'connectivity' and 'fully featured' versions





Product Description

ROTALIGN touch is the first cloud-enabled touchscreen laser shaft alignment system with integrated mobile connectivity.

Be ready to change the way you align. 3D display animations, capacitive touchscreen and wizard guidance make the alignment experience as easy as using a tablet or smartphone.
Voice control frees up both your hands when the alignment job really gets hands-on. The functionality may even be operated with Bluetooth headsets in noisy machine halls.
Powered by the unique sensALIGN and intelliSWEEP measurement technology, ROTALIGN touch features the simultanous Live Move mode, now enhanced with an accoustic move assistant to guide you to the correct alignment.

Besides offering the best usability in the market, ROTALIGN touch is also the first laser alignment tool fully designed to meet the requirements of the smart factory.

With the new ALIGNMENT RELIABILITY CENTER 4.0 software, work orders may be sent via the cloud to a mobile ROTALIGN touch device anywhere in the world and measurement results are sent back straight from the laser alignment tool into the software for monitoring, archiving and advanced reporting.
Asset-specific work orders and RFID machine identification make it possible to track the alignment condition of individual assets over time making alignment data a dynamic condition monitoring parameter for asset management and condition-based maintenance programs.

The integrated camera enables visual asset and job documentation making the alignment job even easier the next time.

Designed to speed up machine corrections

Bur-free for higher accuracy in machinery alignment
Four machine foot sizes, eight thicknesses
Corrosion-resistant high-quality stainless steel
Time-saving permanent thickness dimension marking
No 'leaf spring' effect from stacked shims: only 3 shims are enough!
Perfectly flat for stable, consistent machine support
Perforated tab for easier positioning and removal
Product Description

Each PERMABLOC case is extremely rugged and contains a complete assortment of shims.
It is so handy, with the right shim size and thickness always at your fingertips!
PERMABLOC precut shims are up to four times more cost-effective than hand-cut shims!
Time studies show that up to 15 minutes are required to fabricate a single shim from sheet stock.

Precut shims not only reduce labor costs during installation and repair, but also facilitate inventory control and avoid the risk of injury when cutting and inserting sharp-edged shims.

Mobile, connected, convenient

For Apple and Android devices
Fully wireless with Bluetooth
Intuitive touch operation
Alignment condition with smiley
Email PDF report or upload to web
Product Description

Shaft alignment on mobile devices means greater mobility and flexibility.

But there is even more to tab@lign. The app works with both Apple and Android devices so you may just use your own tablet or smartphone to do the job. If need be, a rugged industrial tablet with glove-enabled touchscreen is available as an additional option.

tab@lign comprises the app, the OS3 sensors and a Bluetooth module for wireless communication.

With a compact carrying case and an intuitive touch user interface, tab@lign is perfect for service technicians on the go and for the occasional users typical use is the alignment check of motor-pump sets during assembly or revision.

Download the free app from the Apple App Store or Google Play and test it in demo mode on your own mobile device.

All-in-one: High-end system for shaft alignment and geometric measurements

Hundreds of positions measured, automatic evaluation of measurement quality and filtering of measurement points: intelliSWEEP.
Convenient alignment of uncoupled shafts: intelliPASS mode.
One-step machine corrections: simultaneous monitoring of machine corrections in vertical and horizontal directions at any sensor position (Live Move).
Handles any amount of misalignment (InfiniRange) including extra-large detector.
Integrated Bluetooth module: no extra accessories required.
Save measurement reports as PDF to a USB stick: no PC required.
Optional expert modules for more alignment applications. See 'More Applications' below.


Product Description

No matter whether it is a motor-pump set or turbomachinery trains, ROTALIGN Ultra iS is a highly versatile system made to handle alignment on all types of rotating machines. This best-of-breed laser alignment system will save you a lot of time and effort!

With intelliSWEEP, you only get the best measurement results under any external and environmental conditions. Using a number of quality factors such as vibration and backlash, poor quality measurement points are automatically filtered out.

Live Move enables one-step machine adjustments through the simultaneous monitoring of machine corrections in both vertical and horizontal directions with the sensor at any angular position on the shaft. Not only does this save a lot of time and effort but it is also extremely useful in case of restricted access to predetermined shaft positions.

The modular system is easily configured with expert modules such as Vibration Acceptance Check, Live Trend for the monitoring of thermal growth, simultaneous multi-coupling measurement, RFID machine identification, and geometric measurements.

A class 1 Bluetooth module is integrated. PDF reports can be generated and directly saved from the system onto a USB stick. Our alignment software is used for preparing, analyzing, archiving measurement files and printing professional reports.

The power of precision shaft alignment

Alignment of horizontal, vertical and flange-mounted machines, coupled and uncoupled shafts.
Sensor with XL HD detectors and MEMS inclinometer.
Hundreds of positions are automatically measured during shaft rotation - SWEEP.
Live monitoring of horizontal and vertical corrections at any angular sensor position on the shaft - Concurrent Live Move.
Flip machines functionality
Save measurement reports as PDF onto a USB stick
Bluetooth communication integrated in handheld unit and RS5 sensor


Product Description

With OPTALIGN smart RS5, shaft alignment has never been so smooth. The unique RS5 sensor contains two XL HD position-sensitive detectors and a MEMS inclinometer to precisely measure the exact position of the laser beam as the shafts are rotated.
With the continuous SWEEP measurement mode, hundreds of positions are automatically measured as shafts are rotated. Measurement can start in any direction with the sensors at any position. All relevant alignment results, including soft foot, are graphically displayed on one screen.

Smiley symbols clearly indicate the alignment status so that there is no need to interpret the results.
With concurrent Live Move, only one measurement is required to perform the required machine adjustments: no matter the position of the sensor on the shaft, Live Move enables to concurrently monitor the vertical and horizontal machine corrections live on the screen. This is extremely useful in case of restricted access to predefined shaft positions.
The Bluetooth module for wireless communication is included in the standard version.
PDF reports can be generated easily and directly saved from the system onto a USB stick.
Our alignment software is used for preparing, analyzing, archiving measurement files and printing professional reports.

The laser alignment system for ATEXIECEX keeps its promises under any circumstances

System and case fully certified for potentially explosive areas.
Alignment of all types of rotating machines and shafts.
Hundreds of positions are automatically measured during shaft rotation (SWEEP).
Pass Mode for convenient alignment of uncoupled shafts.
Only one measurement required for full machine adjustments: Live monitoring of horizontal and vertical corrections at any angular sensor position on the shaft (Concurrent Live Move).
Save PDF reports directly to USB memory stick: no PC required.
Wireless data transfer using the ATEXIECEx certified Bluetooth module (optional)