SYW Industry Sdn Bhd

Perak, Malaysia

• SIZEBTM6X45

Heavy loading capacity Sleeve design improve holding power Technical Information: Drill correct diameter hole to recommended depth. Clean hole thoroughly with a nylon brush. Remove debris by way of vacuum pump, compressed air, hand pump etc. Insert anchor through fixture and tap in until washer contacts fixture. Tighten bolt with torque wrench to recommended assembly torque.

• SIZEE-M6X55 10mm

Easy to use Anchor can be installed through standard fixture holes. Nominal drill bit size is the same as the anchor diameter. Technical Information: Drill correct diameter hole to recommended depth. Clean hole thoroughly with a nylon brush. Remove debris by way of vacuum pump, compressed air, hand pump etc. Insert anchor through fixture and tap in until washer contacts fixture. Tighten bolt with torque wrench to recommended assembly torque.

• sizeSB12mm x 10mm

Wide range, flexible fixing system Quick effective way of securing cables Easy to cut and bend Can support anything from light to heavy weight Easy to install perforated strapping band with evenly spaced holes

• SizeSTM6 X 50

Heavy load capacity Vibration resistance High holding power Technical Information: Drill correct diameter hole to recommended depth. Clean hole thoroughly with a nylon brush. Remove debris by way of vacuum pump, compressed air, hand pump etc. Insert the anchor in hole. Using setting tool, tap in until contact with base material. Tighten bolt with torque wrench to recommended assembly torque.

Sleeve anchor (size in inches) colour or plating available: yellowrainbow zinc, blue zinc, mechanical galvanizes.