Post Buy Requirement
SE
Selangor Darul Eshan, Malaysia
Add Review

Our Products

Electronic Genset

  • Rated Power 150W
  • Model EG150
  • Output Voltage 240V
  • Output Frequency 50HZ
  • Output Waveform Modified Sine Wave
QPS Electronic GenSet is a battery based power generator. This module acts as a portable power source unit and therefore it can supply power to anywhere and at anytime.

QPS Electronic GenSet provides immediate electrical power to critical loads during unpredictable down time. It does not generate noise and pollution. On the top of that, it is also maintenance free.
View Complete Details

Line Reactor

  • Model 3LR8
  • Model Type A
  • Current 8
  • Inductance 3.813
  • Weight (kg 3.9
With the increase in demand for better quality products with minimum cost, new equipment or machines are being develop using electronic devices to meet individual requirements. One of the devices that have gone through tremendous improvement is the variable speed drive. However, variable speed drives are very sensitive to line fluctuations and other nuisance problems.

QPS Line reactors offer an economical solution to a variety of problems especially in variable speed drive installations. They act as current limiting device as well as filters for electrical noises and harmonics generated from the loads. It is applicable to either the input or the output of the drives.
View Complete Details

Energy Saving Lumens Regulator

  • Mode ES 10
  • Power (KVA 10
  • Phases 3 + N
  • Input Voltage 415
  • input Voltage Range (Vac) 216
QPS Energy Saving Lumens Regulator is design to provide cost savings to HID luminaires such as highway lightings, area lightings and car park lightings etc. The cost saving concept is basically to control the power consumption of the luminaires under different conditions such as peak and non-peak hours.

One of the unique design features of QPS Energy Saving Lumens Regulator is the 7 steps voltage transition system. The system allows gradual change of lamp's intensity during dimming process thus reduces distractions to human eyes. The system controls the dimming process by reducing the power gradually from initial value to its preset dimmed value within a timeframe of approximately 20 seconds per step.

Another unique feature of this equipment is that in order to prolong the life span of the lamps and the control accessories, fluctuation of voltage must be eliminated or reduced. This system is incorporated with an automatic stabilizing control to ensure the output voltage to the luminaires is stabilized at all times.
View Complete Details

MSQ Current Transformers

MSQ series current transformers can be applied to test, control, display and record the running of electrical equipment and to protect equipment against damage. They provide the necessary means to measure the actual load current and reduce its values by means of a transformation ratio to a manageable value. The Current Transformer is mounted into a case of PPO flame retardant material.

MSQ range of Encased metering and measuring current transformer are designed and manufactured to cater for wide range of applications. Its quality has been proven and tested to IEC: 44-1 (1996) & ASTA Certified.
View Complete Details

MBQ Current Transformers

MBQ series current transformers can be applied to test, control, display and record the running of electrical equipment and to protect equipment against damage. They provide the necessary means to measure the actual load current and reduce its values by means of a transformation ratio to a manageable value. The Current Transformer is mounted into a case of PPO flame retardant material.

MBQ range of Encased metering and measuring current transformer are designed and manufactured to cater for wide range of applications.
View Complete Details

Golf Car Battery Charger

  • Rated Supply Voltage 240V 50Hz.
  • Battery Type Lead Acid Battery.
  • Charging Voltage 24Vdc, 36Vdc and 48Vdc.
  • Charging Current 17A Max.
  • Charging Type Fully Automatic Charging.
sUPER-LITE GC series golf car battery charger is a portable lead acid charger designed specially for golf car batteries charging. This charger allows you to operate without worrying whether the battery is fully charged or not thanks to the fully automated charging system incorporated within the charger. The input cable comes with a 3 pin 13A plug top that can be connected to any wall mounted 13A sockets comes with 13A normal socket.

Electronic monitoring of charging condition monitors the actual condition during charging and is indicated through bright L.E.Ds located on the front panel. It is very economical, simple to operate and superb reliability which SUPER-LITE battery chargers will always emphasize on.
View Complete Details

Engine Starter

A mobile Starter Charger designed for the garage and fleet operator with modern-style metal casing.
Used as slow & fast charging, and booster purposes.
Equipped with timer for fast charging and auto stop purposes.
Selectable battery voltage range control. (12V & 24V)
Input and output breaker protection.
Variable and adjustable charging current control.
Fitted with rubber-tire wheels and handle for instant mobility.
Built-in MCB against overloads and polarity inversion.
Selectable charging current control.
Robust in design and maintenance free.
Easy to operate, reliable and economical.
View Complete Details

Floodlight

  • Model S1501 MH 70W
  • Lamp Type Double Ended
  • Lamp Holder RX7s
  • Order code S1501 - M0070
NIKKON S1501 is an innovative asymmetrical floodlight suitable for general and specific lighting application. The high pressure Aluminium die-cast housing coated with epoxy powder provides superb weather resistant for indoor and outdoor usage. With the use of high purity anodized hammered finish Aluminium reflector, better distribution of light source can be achieved.

S1501 provide easy installation and minimum maintenance. Its compact and elegant outlook design blends easily into the surroundings of modern and traditional buildings. Suitable for double ended HID 70W 150W RX7s lamps.
View Complete Details

Architectural Lighting

  • model S1070
  • Lamp Type Empty body
  • Lamp holder E27
  • Ordering code S1070-EB
Body is made of die-cast aluminium. The diffuser is made of clear injection moulded polycarbonate with computer designed internal prism to provide a uniform light distribution in all directions. Via stainless steel screws system, the diffuser can be opened, but remains hinged on the body. The reflector is made of high purity anodized aluminium in order to maximize light output and efficiency.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Rae Ong (Success Electronics & Transformer Manufacturer Sdn. Bhd)
  • No. 3, 5 & 7 Jalan TSB 8, Taman Industri Sungai Buloh Sungai Buloh, Selangor Darul Eshan, Malaysia
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/malaysia/company/success-electronics-transformer/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0005458016{main}( ).../index.php:0
20.01632019568include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.27862741808include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.28483677520header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice