Post Buy Requirement
SS
Subang Jaya, Malaysia
Add Review

Our Products

  1. Filters 6 Products available
  2. Measurement Gauges & Fittings 4 Products available
  3. Separators & Strainers 3 Products available
  4. Sensors 3 Products available
  5. Power Connectors 4 Products available
  6. Adaptors, Plugs And Sockets 3 Products available
  7. Flanges 4 Products available
  8. Coupling 5 Products available
  9. Others 45 Products available

Other Products / Services

Cutting Ring Assembly Studs

  • Series Manual Final Assembly Stud Type FI-FK
Cutting Ring Assembly Studs
Manual Final Assembly Stud Type FI-FK

Manual Final Assembly Studs of the FI-FK series facilitate the final assembly of cutting rings on tube ends, thus allowing for consistent assembly results with a maximum degree of accuracy, reliability and process stability

Characteristics and Features

Available in the Extra-Light, Light and Heavy Series according to ISO 8434-1 DIN 2353
Hardened and wear-resistant
Marked with a groove for easier identification
View Complete Details

Combined Cutting Ring Assembly

  • Series SPR-PRC-MA
Combined Cutting Ring Assembly and 37 Tube Flaring Machine SPR-PRC-MA
The electro-hydraulically operated STAUFF Press Assembly Machine SPR-PRC-MA allows the assembly of cutting rings in the Light Series (L) as well as in the Heavy Series (S) according to ISO 8434-1 DIN 2353 on metric tube ends with outer diameters from 4 mm to 42 mm.

Exchangeable heads allows the device to be adapted for 37 flaring of metric and imperial tube ends with outer diameters from 4 mm to 42 mm and from 14 in to 1 12 in respectively according to DIN 3949 or SAE J514 ISO 8434-2.

Short times for tool changes, setup and assembly (even when changing the assembly type from cutting ring assembly to 37 tube flaring) make it possible to carry out series production as well as the assembly of small and medium quantities with a high level of economic efficiency, reproducibility and process reliability with considerable reduction of times and cost of assembly of fittings.

The adjustable return stoke of the cylinder helps the operator to further optimise the total cycle times.

The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with hardened and wear-resistant assembly tools which are specially designed for the machine-assisted assembly.
View Complete Details

STAUFF Clean Pipe

STAUFF Clean Pipe, Tube and Hose Cleaning System
The STAUFF Clean System comprises of a pneumatic launcher and a range of specially designed nozzles and projectiles. The launcher uses standard industrial compressed air pressure between 6 and 8 bar 87 and 116 PSI to propel a foam projectile through the nozzle and into the pipe, tube or hose bore to have their inside surface cleanedfrom any unwanted contamination. This provides a safe and environmentally friendly tool that requires little formal expertise to operate and apply.

The launcher is the part of the system that controls the air supply to propel the projectile from start to finish of the cleaning job.

The nozzles are specially designed to affect an airtight seal on any pipe, tube or hose with or without end fittings. Its main purpose is to compress the foam projectile allowing it to enter the internal diameter of the pipe, tube or hose to be cleaned.

The projectile is the part of the system that does the cleaning: The foam projectile is sized to be approximately 15% larger than the internal diameter of the pipe, tube or hose to be cleaned. The compression of the projectile against the internal wall cleans the internal surface and expels any loose contaminants from the end of the pipe, tube or hose.

The STAUFF Clean System is available as separate components or in a variety of kit forms comprising various nozzle types, adaptor and launcher, all contained in a heavy duty carrying case.
View Complete Details

Thread Identification Boards

The STAUFF Thread Identification Board is intended to be used as a universal tool for workshops, warehouses or sales counters allowing quick and easy determination of common thread types and sizes, e.g. for male stud tube connectors and test couplings.

The board is available in two different versions:

Version FI-TIB-MG with
13 metric threads (M8x1 to M48x2) and
8 BSP threads (G18 to G1 12)

Version FI-TIB-NU with
8 NPT threads (18-27 to 1 12-11.5 NPT),
5 UNF threads (716-20 to 78-14 UNF) and
4 UN threads (1 116-12 to 1 78-12 UN)
View Complete Details

STAUFF Form Tube Forming System

  • DIMENSIONS 6 x 1.5 mm and 42 x 4 mm
STAUFF Form Tube Forming System
Performance

The patented STAUFF Form tube forming system is without doubt one of the most high-performing solutions currently available on the market for connecting metric sized tubes. Apart from its simplicity, it also provides a maximum level of safety, reliability and reproducibility.

STAUFF Form has been designed as standard for seamless cold-drawn precision steel tubes as well as stainless steel tubes with dimensions between 6x1.5mm and 42x4mm in the Light Series and between 6x1.5mm and 38x6mm in the Heavy Series. Parameters for alternative materials (copper, brass, CuNiFe, Tungum etc.) can be added by the manufacturer, if required.

System Design and Components

The system is based on standard parts and consists of only four key components:

The STAUFF Form Ring with an integrated and thus undetachable elastomeric sealing is slid onto the tube end, which has previously been mechanically contoured. This creates a positive-locking connection that provides a reliable, permanent and maintenance-free seal when used with a conventional fitting body with 24 conical bore and a union nut, both according to ISO 8434-1.

Versatility and Flexibility

Users benefit from the great versatility and flexibility of the system, as well as the many combination and adaptation options offered by using standard components from the STAUFF Connect product range.

There is therefore no need to duplicate the stock-keeping of similar components with a correspondingly high likelihood of confusion, as is often the case with comparable systems. Material and logistics costs can thus be correspondingly reduced.

Materials and Surface Finishing

Like all other components in the STAUFF Connect product range, STAUFF Form Rings are designed as standard with a high-quality zincnickel surface coating.

With over 1, 200 hours of resistance to red rust base metal corrosion in the salt-spray chamber in accordance with DIN EN ISO 9227, the coating offers most reliable corrosion protection far beyond previously accepted market standards.

Even after shipping, handling and assembly of the components, the coating significantly exceeds the requirements for the highest corrosion protection class K5 defined in VDMA Standard Sheet 24576 for tube connectors.

Sealing

The sealing of the only possible leakage path is provided primarily by the large-volume elastomeric sealing fitted to the STAUFF Form Ring, which is specifically positioned between the surface of the tube and the 24 conical bore of the fitting body during assembly.

FKMFPM (Viton) is used as the standard sealing material and enables problem-free use of the STAUFF Form tube forming system for challenging applications involving high temperatures or aggressive media.

The unique sealing profile has a particularly large cross-section in order to provide a safe, reliable and permanent seal even in the event of unfavourable tolerances of the tube and fitting. The sealing effect is assisted by the system pressure of the hydraulic system so that the STAUFF Form tube forming system is also the perfect choice for high-pressure applications.

Pressure Resistance

When the STAUFF Form tube forming system is used in conjunction with genuine products from the STAUFF Connect product range, it provides pressure resistance of up to 800 bar in the Heavy Series and 500 bar in the Light Series (generally with a four-fold safety factor and depending on the series, design and size of the fitting body and taking into consideration various pressure reducing factors). This is the result of exceptional care taken in the development of the system and the selection, handling and processing of the raw materials.

Maximum tear-out strength can be guaranteed for the system due to the contour shaped at the tube end.

Final Assembly in the Fitting Body

Final assembly is performed by tightening the union nut until the point with clearly noticeable increase in force (fixed point). The assembly is completed with another turn by approximately 15 to 20 beyond this point.

This incredibly simple assembly method has several benefits for the user:

Considerably lower torques and short assembly paths(once the fixed point has been reached)
Significant increase in torque to clearly indicate the end of the assembly
Maximum safety to combat over-assembly
No need for time-consuming and expensive training
Connections made with the STAUFF Form can be untightened as often as required and reassembled without wear, as any damaging expansion of the 24 conical bore of the fitting body is technically avoided.
View Complete Details

SAE Blocks

  • Series BF-T
SAE Blocks
SAE Block T-Connection (Adapter Style) BF-T

6000 PSI High Pressure Series (based on ISO 6162-2:2006): 34" (DN19) . 2" (DN51)
Materials: S355J0 or equivalent, Stainless Steel 1.4404 on request (W5)
Surfaces: CrVI-free
Deviant surface treatment: blank oiled (W1) on request
View Complete Details

Reader

  • Series PT-RF
Pressure Transmitter & Reader PT-RF
Pressure Transmitter and Reader of the PT-RF Series
The PT-RF series of pressure transmitters are an alternative solution for universal pressure measurements for fluid technology applications, which will provide benefits for system operators, maintenance personnel and repair technicians as well as for original equipment manufacturers.

The advantages resulting from the use of the new technology for system operators, maintenance personnel and repair technicians are clear:
Measurements can be carried very easily, without extensive training and within a few seconds at the press of a button and then documented in a reliable process.

Unscrewing and re-installing pressure gauges or other measuring and display devices practically a temporary opening of the system is not required. Potential hazards for people, machines and the environment, for example from emitted residual oil in the test hose or leaks at the measuring point, as well as ingress of dirt into the system (e.g. in dusty environments) can be effectively excluded.

Original equipment manufacturers will also benefit from this new technology: If the pressure transmitters are installed at their factory already, the innovative technology can provide a competitive edge over alternative suppliers and open up specific advantages for the users, increasing the value retention of their own devices in the long term.

If the pressure transmitters are installed directly in the system or pipeline for permanent use, they protrude only slightly more than conventional hydraulic test couplings and meet the highest demands with regard to space requirements and weight.
View Complete Details

Oil Sampling Kits

  • series SFSK-1 / -2
Fluid analysis is a crucial component of any oil management program. Early detection of potential problems can prevent costly repairs and downtime. STAUFF SFSK oil analysis kits provide the tools to take a sample from a STAUFF test coupling or directly from a reservoir or sump.

For this the supplied hose is directly connected to the test coupling with an adapter and the fluid is filled into the supplied vials.

But there is also the possibility to draw up the sample directly from a tank with the hand pump and fi ll it into the vial.

This sample set is available in two versions with BSP and NPT test couplings.
View Complete Details

Spin-On Filters

  • Nominal Flow Rate ▪ Max. 460 l/min / 120 US GPM
STAUFF Spin-On Filters
STAUFF provides a complete range of Spin-On filters which can be used either as suction filters or as return line filters for low pressure applications. The various ranges meet international standards. The corresponding STAUFF Filter Elements are available from stock.

Options and Accessories
Clogging Indicators (available as an option)
Visual clogging indicator with coloured segments
Electrical clogging switch
Other types available on request



Technical Data
Constructions
In-line Spin-On filter head
In-line Double Spin-On filter head
Tank Top Spin-On filter head

Operating Pressure
Max. 14 bar 200 PSI

Nominal Flow Rate
Max. 460 lmin 120 US GPM

Connections
Option of BSP, NPT, SAE flange or SAE thread,
others on request

Material
Filter head: Aluminium

Media Compatibility
Mineral oils, other fluids on request
View Complete Details

Plastic Filler Breathers

  • Series SPB
STAUFF Plastic Filler Breathers SPB
Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments

Types
SPB 1 (Screw-in version; Cap 45mm 1.77in)
SPB 2 (Screw-in version; Cap 70mm 2.76in)
SPB 3 (Screw-in version; Cap 101mm 3.98in)
SPB 4 (Bayonet version for clamping jaw installation
to a single mounting hole; Cap 101mm 3.98in)
SPB 4 (Bayonet Version with six-hole bolt pattern for flange
interfaces similar to DIN 24557-2; Cap 101mm 3.98in)

Materials
Made of non-corrosive materials
Body and cap made of glass-fibre reinforced Polyamide (PA)
Sealings made of NBR (Buna-N)

Consult STAUFF for alternative materials.

Technical Data
Operating temperature range:
-40C . +120C -40F . +248F

Options Accessories
Plastic basket (800m)
Telescopic plastic basket (800m)
Pressurisation up to 0, 7bar 10PSI
Air filter element
Anti-splash feature
Plastic dipstick with integrated anti-splash feature
Weld riser
Side mount bracket (Polyamide)
Side mount bracket (Aluminium)

Some options accessories may only be
available for particular sizes or designs!
View Complete Details

Block Clamps

  • Series Standard Series (DIN 3015-1)
Standard Series (DIN 3015-1)
Standard Series according to DIN 3015, Part 1
Most economical solution available for quick, easy
and secure pipe, tube, hose and cable installation

Original STAUFF Block Clamps according to German Industry Standard DIN 3015 (Part 1), designed as a construction kit for the
installation of pipes, tubes, hoses, cables and other flexible or rigid components with the most common metric and imperial
outside diameters from 6 mm to 102 mm .24 inch to 4.02 inch.

Clamp bodies manufactured from various thermoplastics, thermoplastic elastomers or aluminium also with shock-absorbing
and noise-reducing elastomer inserts. Excellent UV, weathering and chemical resistance even under extreme conditions.
Tested and approved by several independent certification organisations.
View Complete Details

Cutting Ring Assembly Machine

  • Series SPR-PRC-POC
The STAUFF Press Assembly Machine SPR-PRC-POC allows the pressureposition-controlled pre-assembly and final assembly of cutting rings from the Extra-Light Series (LL), the Light Series (L) and the Heavy Series (S) according to ISO 8434-1 DIN 2353 on tube ends with outer diameters between 4 mm and 42 mm.

The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with hardened and wear-resistant assembly studs FI-FMK and support plates FI-GP which are specially designed for the machine-assisted assembly.

The combined pressureposition-control of the device allows wear on the assembly tools to be detected in time before it can have a negative influence on the assembly result. Maximum service life of the tools is achieved through careful handling of the components and practical operation of the assembly machine. Other factors are proper storage (protected against contamination and corrosion), regular cleaning and lubrication (with suitable lubricants) and thorough preparation of the tube ends before assembly (cutting, deburring and cleaning).

Short times for tool changes, setup and assembly make it possible to carry out series assembly of cutting rings as well as assembly of small and medium quantities with a high level of economic efficiency, reproducibility and process reliability. Among other things, this is achieved with the RFID transponders which are integrated into the support plates for automatic tool size identification as a standard and with the tool contact switch: this allows assembly processes to be automatically started and completed by simply pushing the tube end into the assembly stud without having to press any buttons. The assembly area is secured against interference by a light grid to comply with current accident prevention regulations.

The convenient operating panel on the cutting ring assembly machine allows the user to choose between pre-assembly and final assembly at any time:

When utilising the machine-assisted 50% pre-assembly, the fitter then has to manually finish the assembly by tightening the union nut by 180 (corresponds to 12 turns) beyond the fix point. With machine-assisted final assembly, the cutting ring has already cut 100% into the tube and the fitter only has to tighten the union nut by 30 (corresponds to 112 turns) from the fix point. Please pay attention to the corresponding assembly instructions in both cases.

Final assembly (100%) minimises the risk for errors (insufficient or excessive manual tightening) and the resulting leak potentials which can often lead to time consuming and expensive machine downtimes and environmental impact. Due to the time benefits during final tightening, final assembly by machine also generates clear saving potentials compared to manual direct assembly as well as to machine-assisted
pre-assembly.

In case of incorrect or incomplete assembly where pressure and position parameters significantly deviate from the values stored in the machine, it automatically stops the assembly process and displays a corresponding warning message on the operating panel.
View Complete Details

Portable Cutting Ring Assembly Machine

  • Series SPR-PRC-H
Portable Cutting Ring Assembly Machine SPR-PRC-H
With the battery-operated STAUFF Press Assembly Machine SPR-PRC-H-M, STAUFF provides an ergonomically designed, light-weight and at the same time robust device for the assembly of cutting rings in the Light Series (L) as well as in the Heavy Series (S) according to ISO 8434-1 DIN 2353 on metric tube ends with outer diameters from 6 mm to 42 mm.

The machine has been designed for hand-held, tripod- or table-mounted operation and offers the best technical compromise between maximum flexibility, economic efficiency and a high level of process reliability with considerable reduction of time and cost for the assembly of cutting ring fittings.

Short tool change and setup times (with only a few seconds required to manually adjust the assembly pressure) make it possible to carry out the assembly of medium and even small quantities of cutting ring fittings, e.g. during maintenance, servicing, conversion and repair works on hydraulic pipe and tube systems. With the rechargeable battery being able to typically cover more than 200 assembly cycles per charge (depending on pressure settings and other influencing factors), the machine is also suitable for mass processing and production.

The assembly machine is by default supplied in a heavy-duty trolley transport case that is equipped with a range of accessories and also provides suitable space for the assembly studs.
View Complete Details

STAUFF Form Tube Forming Machine

  • Series SFO-F
STAUFF Form Tube Forming Machine SFO-F
The type SFO-F tube forming machine facilitates the economical and most reliable production of tube ends made of steel, stainless steel and other materials with a contour typical for the STAUFF Form tube forming system.

The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with FI-FST tube shapers and FI-FB clamping jaws. Tube shapers with FI-ID internal tube supports are used with selected tube dimensions, which prevent the tube from being constricted in the shaping area.

Tube shapers, clamping jaws and internal tube supports have been specifically designed for the mechanical forming process and can be quickly and simply replaced without the need for any tools, if required. The resulting short tool change and set-up times contribute to the high efficiency of the system as well as ensuring low cycle times.

All the tools needed for the forming process are clearly labelled with the tube dimensions so that assembly errors caused by incorrect assignment can be largely ruled out.
View Complete Details

Flared Tube Fittings

  • Series 37° Flared Tube Fittings
STAUFF Connect 37 Flared Tube Fittings have been developed and designed for the reliable, leak-free connection of tubes with a 37 flare with conventional fitting bodies with a 24 cone according to ISO 8434-1.

Thanks to the optimised geometry of STAUFF Connect 37 Flared Tube Fittings with metallicelastomer sealing at the contact points both to the fitting body and the tube, efficient sealing is ensured, even if there are vibrations and pressure fluctuations peaks.

STAUFF Connect 37 Flared Tube Fittings can be used in applications with nominal pressures up to 500 bar 7250 PSI on the Light Series or up to 630 bar 9135 PSI in the Heavy Series (pressure reduction factors to be considered).
View Complete Details

SAE Flanges

  • Series SAE Split Flange Halves DB
SAE Split Flange Halves and SAE Flange Clamps
SAE Split Flange Halves DB

3000 PSI Standard Pressure Series (acc. to ISO 6162-1:2006): 12" (DN13) . 5" (DN127)
6000 PSI High Pressure Series (acc. to ISO 6162-2:2006): 12" (DN13) . 2" (DN51)
Materials: S355J0 C45 (or equivalent), Stainless Steel 1.4404 on request (W5)
Surfaces: CrVI-free
View Complete Details

Test Hoses And Connectors

  • Series SMS
Test Hoses and Accessories
Nominal Bore (DN)
DN2 = Version A and B
DN4 = Version C and D

Max. Working Pressure (PN)
DN2 = Version A: 400 bar 5801 PSI
DN2 = Version B: 630 bar 9135 PSI
DN4 = Version C: 340 bar 4931 PSI
DN4 = Version D: 630 bar 9135 PSI

Min. Burst Pressure
DN2 = Version A: 1100 bar 15954 PSI
DN2 = Version B: 1900 bar 27557 PSI
DN4 = Version C: 850 bar 12328 PSI
DN4 = Version D: 1900 bar 27557 PSI

Materials
Inner outer tube made of PA
Reinforcement made of Synthetic Fibre
View Complete Details

Hydraulic Testers

  • Series Hydraulic Testers PPC-04-plus / PPC-04-plus-CAN
Hydraulic Testers PPC-04-plus
Hydraulic Testers PPC-04-plus PPC-04-plus-CAN
The PPC-04-plus and PPC-04-plus-CAN Hydraulic Testers have been developed for the growing demands in mobile and industrial hydraulic systems. They are perfectly suited for the precise determination of pressure, temperature, volume flow and rotational speed.

Versions

PPC-04-plus
Analogue version
Max. two analogue sensors can be connected at the same time
View Complete Details

CAN Frequency Converter

  • Series PPC-CAN-FR
CAN Frequency Converter CAN-FR
CAN Frequency Converter PPC-CAN-FR
Measuring Frequency with PPC-CAN-FR
The PPC-CAN-FR can be used to connect frequency signals (e.g. from turbines, flow counters or tachometers) to the PPC-Pad or PPC-04-plus-CAN. The instruments can process sinus and rectangle signals from 1 Hz to 5 KHz with signal amplitude from 20 mV to 10 V. Configuration is possible via USB and PC software.

Power Supply for External Sensors
An external sensor can be supplied with 24 V using the PPC-CAN-FR.

Analogue or CAN Output
The PPC-CAN-FR can be connected either to an analogue input or CAN input.
View Complete Details

Pressure Transmitter

  • Series PT-RF Series
Pressure Transmitter & Reader PT-RF
Pressure Transmitter and Reader of the PT-RF Series
The PT-RF series of pressure transmitters are an alternative solution for universal pressure measurements for fluid technology applications, which will provide benefits for system operators, maintenance personnel and repair technicians as well as for original equipment manufacturers.

The advantages resulting from the use of the new technology for system operators, maintenance personnel and repair technicians are clear:
Measurements can be carried very easily, without extensive training and within a few seconds at the press of a button and then documented in a reliable process.

Unscrewing and re-installing pressure gauges or other measuring and display devices practically a temporary opening of the system is not required. Potential hazards for people, machines and the environment, for example from emitted residual oil in the test hose or leaks at the measuring point, as well as ingress of dirt into the system (e.g. in dusty environments) can be effectively excluded.

Original equipment manufacturers will also benefit from this new technology: If the pressure transmitters are installed at their factory already, the innovative technology can provide a competitive edge over alternative suppliers and open up specific advantages for the users, increasing the value retention of their own devices in the long term.

If the pressure transmitters are installed directly in the system or pipeline for permanent use, they protrude only slightly more than conventional hydraulic test couplings and meet the highest demands with regard to space requirements and weight.
View Complete Details

Flow Indicators

  • Series SDM / SDMKR
Flow Indicators SDM SDMKR
Flow Indicators SDM SDMKR
Analogue flow indicators for measuring the flow rate of fluids in mobile and industrial hydraulics. The SDMKR is designed with a loading valve for the strain test of the hydraulic system to facilitate precise control of the operating pressure. In addition, this product can also be subjected to a reverse flow direction (without flow rate determination).

Features
Suitable for Mineral Oil (Aluminium),
HFC Fluids and Water (Brass)
Designed for in-line installation
Mechanical flow measurement
Controlling working pressure with a pressure
control valve (only SDMKR)
Flow indication in lmin and GPM for Aluminium units,
Brass units have flow indication for Water and Oil
both in lmin
Aluminium unit: Dual scale
Brass unit: Single scale
Thread to connect with pressure gauge (only SDM)

Technical Data
Accuracy
(at a kinematic viscosity of 28cSt):

Flow: 4 % FSD
Temperature: 2, 5 C 5 F
Pressure (only SDMKR): 1.6 % FS*
Temp. measuring range: +20 C . +110 C
+55 F . +245 F
Media temperature
permanent: +80 C +176 F
temporary (420 bar the disks burst and the fluid is by-passed around the valve. The rupture disks (other pressure ranges on request) can be replaced easily. The SDMKR also permits flow in the reverse direction (without flow rate determination).
View Complete Details

Laser Particle Counters

  • series LasPaC-II
  • Sample Volume 8 ml (short), 15 ml (normal), 30 ml (dynamic), 24 ml (bottle sampler), 15 ml (continuous)
Fluid analysis is a crucial component of any oil management program. Early detection of potential problems can prevent costly repairs and downtime. The LasPaC II makes it possible to detect the ISO Cleanness levels of the hydraulic media. The LasPaC II is available in three different versions.

Features
Compact and Convenient
Twin-laser, 100% Coverage
Integrated Clock
Adaptable - Software Updates
Electric operated flush valve
option of adding an integral
moisture temperature sensor

Technical Data
Power Supply
Voltage range: 110 . 240 V, AC 12 . 24 V DC
European, UK and US power plug adaptors included
Pressure Viscosity
Pressure range: 2 . 400 bar 29 . 5801 PSI
Viscosity range up to 400 cSt

Calibration
ISO Medium Test Dust (MTD) acc. to ISO 11 171:1999
Analysis range: ISO 8-24, ISO 4406 Code,
NAS 1638 Code 2-12, SAE AS 4059 Code 2-12

Laser Sensors
High accuracy laser: 4 . 6 m(c)
Standard accuracy laser: 6 . 68 m(c)
Measured channels: 4, 6, 14, 21, 25, 38, 50, 68 m(c)
The maximum concentration is ISO 4406 Code 24
(160.000 pml)

Hose Connections
Test coupling STAUFF Test 20 or comparable

Sample Volume
8 ml (short), 15 ml (normal), 30 ml (dynamic),
24 ml (bottle sampler), 15 ml (continuous)

Data Output
Cumulative particle counts, as well as cleanliness
classes acc. to ISO 4406 (1999) SAE AS 4059 Rev.D
(2001) and ISO 4406 (1191) NAS 1638 (1964)

Data Storage
600 tests

Fluid Compatibility
Mineral Oil, Petroleum based fluids
Phosphate Ester and Water Glycol compatible devices
on request

Computer Interface
RS-232 communication port as standard
USB adaptors included

External Alarm
External alarm socket with switching outputs
max. 24 V DCAC, 1 A

Software
Downloading and storage of the data with
included LasPaC II View software.
View Complete Details

Particle Monitors

  • series LPM II
The development of STAUFF's LPM II Particle Monitor is based on the experience that has been gained using the familiar LasPaC II series analysis units. By contrast with the previous LPM I version, the LPM II Particle Monitor determines the degree of contamination of the measured fluid on eight channels and offers more precise and more complete determination of the particle size in accordance with international standards.
View Complete Details

Oil Condition Sensor

  • Dimensions 90 x 37 mm / 3.54 x 1.46 in
  • series Sensor OCS
The Oil Condition Sensor OCS is designed for continuous monitoring of hydraulic systems. Permanently installed in the system the OCS sensor monitors the condition of hydraulic fluids and lubricating oils in real time, whereby water ingress and oxidation can be detected in time.

The OCS sensor is 60 times more sensitive than dielectric sensors on increasing contamination and protects the system from cost-intensive downtimes and reduces machine downtimes.

Thanks to its robust construction the OCS sensor can even be used under extreme conditions and temperatures.

Features
Robust construction
Usage under extreme conditions with temperatures from -20 C . +120 C -4 F . +248 F
Suitable for use at operating pressures up to 20 bar 290 PSI

Technical Data
Materials
Stainless Steel (corrosion-resistant Steel) AISI304, 1.4301.

Dimensions
90 x 37 mm 3.54 x 1.46 in

Weight
160 g .35 lbs

Sealing Material
FPM (Viton)

Max. Burst Pressure
20 bar 290 PSI

Media Temperature
-20 C . +120 C -4 F . +248 F

Media Compatibility
Mineral and Synthetic Oil (others on request)

Process Connection
G12


Electrical Connection
6-pin connection plug

Power Supply
9 . 30 V DC

Analog Output
4 . 20 mA

Computer Interface
RS485

Protection Rating
IP67
View Complete Details

High Pressure Filters

  • Nominal Flow Rate Max. 1.135 l/min / 300 US GPM
  • series SF
STAUFF High Pressure Filters - Type SF
STAUFF High Pressure Filters type SF are designed for in-line hydraulic and lubrication applications, with a maximum operating pressure of 420 bar 6.000 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs.

Options and Accessories
Valves (available as an option)
Bypass, reverse flow, non-return or multi-function valve

Clogging Indicator (available as an option)
Visual, electrical or visual-electrical
differential pressure indicator

Filter Elements
Filter elements of SE series

Technical Data
Construction
High pressure filter designed for in-line assembly
Threaded mounting holes on top and fluid ports on side
Option of standard or two-part top loader version

Operating Pressure
Max. 420 bar 6.000 PSI

Nominal Flow Rate
Max. 1.135 lmin 300 US GPM

Connections
Option of BSP, NPT, SAE thread or SAE flange
(ISO 6162-12)

Materials
Filter head: Spheroidal Graphite Cast Iron
Filter bowl: Cold Drawn Steel

Media Compatibility
Mineral oils, other fluids on request
View Complete Details

Medium Pressure Filters

  • Nominal Flow Rate Max. 240 l/min / 70 US GPM
  • series SFA
STAUFF Medium Pressure Filters - Type SFA
STAUFF Medium Pressure Filters type SFA are designed for in-line hydraulic and lubrication applications, with a maximum operating pressure of 160 bar 2.320 PSI. Used together with STAUFF SE series Filter Elements, a high efficiency of contaminant removal is assured. The high dirt-hold capacity of the elements ensures long service life and, as a result, reduced maintenance costs.

Options and Accessories
Valves (available as an option)
Bypass, reverse flow, non-return or multi-function valve

Clogging Indicator (available as an option)
Visual, electrical or visual-electrical
differential pressure indicator

Filter Elements
Filter elements of SE series

Technical Data
Construction
Medium pressure filter designed for in-line assembly
Threaded mounting holes on top and fluid ports on side
Low weight and compact design

Operating Pressure
Max. 160 bar 2.320 PSI

Nominal Flow Rate
Max. 240 lmin 70 US GPM

Connections
Option of BSP, NPT, SAE thread or SAE flange
(ISO 6162-1)

Materials
Filter head: Cast Aluminium
Filter bowl: Aluminium

Media Compatibility
Mineral oils, other fluids on request
View Complete Details

Offline Filter Systems

  • Nominal Flow Rate ▪ 2, 1 . 17 l/min / .55 . 4.5 US GPM
  • series OLS-CM
Offline Filter System - Type OLS-CM
The STAUFF Offline Filter System Condition and Monitoring OLS-CM has been specially developed for the elimination of dirt and water particles in hydraulic and lubrication systems.

Subsequent integration into an existing hydraulic system is possible, since the offline filter system operates independently of the system cycle, also during scheduled machine downtimes.

The OLS-CM is optionally available with factory-fitted Particle Monitor LPM II and Oil Condition Sensor OCS with Oil Condition Display OCD.

Options and Accessories
MotorPump Unit
Available in different configurations

Clogging Indicator
Visual clogging indicator

Replacement Filter Elements
Filter Elements type SRM

Technical Data
Construction
OLS-CM with control box and preparation for
installation of LPM II, OCS sensor with OCD display

Nominal Flow Rate
2, 1 . 17 lmin .55 . 4.5 US GPM

Port Connection
G38, G12, G34 and 18 L

Materials
Anodised Aluminium

Media Compatibility
Mineral and lubrication oils, other fluids on request

Control Box includes:
Main switch
StartStop button
Emergency stop button
Warning light Unit on
Motor protection relay
Emergency stop relais
Power supply 24 V DC
RS485-to-USB converter
USB B Interface to read out the measured values
from LPM II and OCS (if available)
Main cable (3 m 9.84 ft) incl. CEE plug
View Complete Details

Bypass Lube-Oil Filters

  • series BPLS
Bypass Lube-Oil Filters of the BPLS series
BPLS Bypass Filters are used as an additional micro filter connected in bypass to the conventional main stream filters on engines (and automatic transmissions.)

Options and Accessories
Filter ElementS
Filter elements of SRM series

Technical Data
Construction
Bypass Lube-Oil Filters
(for engines and transmission systems)

Maximum Sump Size
35 l 9.25 gal

Housing Volume
2, 2 l 0.58 gal

Port Connections
G14

Materials
Aluminium
View Complete Details

Level-Temperature Switches

  • series SLTS
Level-Temperature Switch SLTS
The STAUFF Level-Temperature Switches (SLTS Series) are unique in their design and modularity. One of the greatest advantages is the ability of the end-user to adjust the switching level. The internal support wire carrying the level and temperature switches makes it a simple and quick job to change the level switch position.

Features
Suitable for Mineral Oil and HFC fluids,
other fluids on request
Either 1 or 2 level contacts available
1 integrated temperature sensor (optional)
Standard electrical function:
Level contacts: Normally closed, opens with
falling level
Temperature contacts: Normally closed, opens
with rising temperature

STAUFF Level-Temperature Switches SLTS are available
with other electrical functions on request.

Options
1 NPT and others availble on request
max. 115 Volt switching (for thread N16 only)

Technical Data
Materials
Stem: Brass
FloatSealing: NBR (Buna-N)

Max. operating temp.: +80C +176F

Electrical Data and Output
Max. current level contact: 0.5 A
Max. current temp. contact: 2.0 A
Contact load level contact: 10 VA
Max. operating voltage: (See ordering code)

Specific gravity of fluid: 0, 8 kgdm3
Hysteresis: +18C +64.4F

Protection Rating
IP 65 protection rating: Dust tight and protected
against water jets
View Complete Details

Metal Filler Breathers

  • Series SMBT/SMBB/SMBP
STAUFF Metal Filler Breathers
SMBTSMBBSMBP
Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments

Types
SMBT-47 (Screw-in version; Cap 47mm 1.85in)
SMBB-47 (Bayonet version; Cap 47mm 1.85in)
SMBT-80 (Screw-in version; Cap 80mm 3.15in)
SMBB-80 (Bayonet version; Cap 80mm 3.15in)
SMBP-80 (Push-on version; Cap 80mm 3.15in)

Materials
Breather cap made of Steel, zincnickel-plated
(FeZn Ni 6) and free of hexavalent chromium
CrVI (standard option); chrome-plated and
epoxy-coated versions available
Bayonet flange made of Steel, zinc-plated
Basket made of Steel, zinc-plated or Polyamide (PA)
Dipstick adaptor made of Polyamide (PA)
Sealings made of Cork (for filler breathers without
pressurisation) or NBR (Buna-N) (for pressurised filler
breathers)

Options Accessories
Metal basket
Plastic basket
Pressurisation up to 0, 7bar 10PSI
Air filter element
Locking feature
Dipstick adaptor
Plastic dipstick with integrated anti-splash feature
Extended bayonet flange
Weld riser
Side mount bracket (Polyamide)
Side mount bracket (Aluminium)

Some options accessories may only be
available for particular sizes or designs!
View Complete Details

Diffusers

  • series SRV
STAUFF Diffusers SRV
Designed for direct installation into return lines
to reduce fluid aeration, foaming and noise;
should always be installed below the
minimum fluid level

Features
Available with female BSP thread (ISO 228)
or female NPT thread (ANSI B1.20.1)

Design and Materials
2 concentric tubes with inner spaced holes
Installation below the minimum fluid level of the
reservoir with the plain area facing the pump inlet
Threaded end cap made of Aluminium
Other components made of Steel, zinc-plated

Special sizes, designs, materials and configurations
are available on request. Consult STAUFF for details.

Media Compatibility
Suitable for use with Mineral and Petroleum based
hydraulic fluids (HL and HLP)

Technical Data
Operating temperature range:
-20C . +100C -4F . +212F
Max. working pressure: 20bar 290PSI
View Complete Details

Locking Devices

Locking Devices

Various designs and configurations available, depending
on the actual type and size of the ball valve
Universal field-installed devices avaibale
View Complete Details

Two-Way Ball Valves

  • Series BBV2
Two-Way Ball Valves
Two-Way Ball Valves with Threaded Connections

Block Body Ball Valves with Threaded Connections BBV2

Two-way high-pressure block body ball valves designed for use as onoff devices for hydraulic applications
with female BSP, NPT or UNUNF thread, male ORFS connection or 24 cone connection
Pressure range: up to 500bar 7250PSI (depending on size and material combination of the ball valve)
View Complete Details

Multi-Way Ball Valves

  • Series CBV3
Three-Way Ball Valves with Threaded Connections
Block Body Ball Valves with Threaded Connections CBV3

Compact three-way high-pressure block body ball valves designed for use
as three-way selectors (L-bore, 90 operation) for hydraulic applications
Compact diverter style Pressure inlet possible from center port only
With female BSP, NPT, UNUNF thread or 24 cone connection
Pressure range: up to 500bar 7250PSI (depending on size and material combination of the ball valve)
View Complete Details

Throttle Valves

  • Series DV
Throttle Valves
Throttle Valves for In-Line Assembly DV

Throttle and shut-off the flow of liquid media in both directions
Designed for in-line assembly with female BSP, NPT and SAE threaded connections
Graduated turning knob and coded spindle to accurately control flow
Set-screw located on side of turning knob to lock valve in position
Panel mounting nuts available on request
Maximum working pressure: up to 350bar 5000 PSI
View Complete Details

Pressure-Compensated Throttle Check Valves

  • Series PNDRV
Pressure-Compensated Throttle Check Valves
Pressure Compensated Throttle Check Valves PNDRV

Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction)
With pressure compensating feature via built-in compensating piston
Designed for in-line assembly with female BSP, NPT and SAE threaded connections
Graduated turning knob to accurately control flow
Set-screw located on side of turning knob to lock valve in position
Panel mounting nuts available on request
Maximum working pressure: 210bar 3000PSI
View Complete Details

Check Valves

  • Series Check Valves RV
Check Valves
Check Valves RV

Allow single-directional flow only
Designed for in-line assembly with female BSP, NPT and SAE threaded connections
Metal-to-metal seat
Maximum working pressure: 500bar 7250PSI (depending on size)
View Complete Details

Levers

Levers

Straight and off-set design available
Made of zinc, steel, stainless steel or aluminium
View Complete Details

Flow Turbines SFM

  • Series PPC-04/12-SFM
Flow Turbine PPC-0412-SFM
Flow Turbine PPC-0412-SFM
Analogue version
5-pin connection
Can be used with all analogue Hydraulic Testers of the PPC series
View Complete Details

CAN Flow Turbine

  • Series PPC-CAN-SFM
CAN Flow Turbine PPC-CAN-SFM
CAN Flow Turbine PPC-CAN-SFM
CAN version
5-pin SPEEDCON connection plug

Technical Data
Housing: Aluminium (black anodised)
Gaskets: FPM (Viton)
Accuracy (at 21 cSt): 1 (% FS*) or
1 (% of the displayed value)
Pressure measurement connection: SMK20 (M16 x 2)
Temperature measurement connection: M10 x 1
(standard screw plug)
Calibration certificate on request
UNF version on request
Ambient Conditions
Media temperature: -20 C . +90 C -4 F . +194 F
Ambient temperature: -10 C . +50 C +14 F . +122 F
Storage temperature: -20 C . +80 C -4 F . +176 F
Permissible particle size: < 10 Micron for SFM-015
< 25 Micron for others
Viscosity range: 10 . 100 cSt

Electrical Data
Response time: 50 ms

Accessories
Flow Turbine (analogue):
A PPC-0412-CAB3 (3 m 9.84 ft) Connection Cable is
needed to connect the sensor to the current Hydraulic
Testers.
A PPC-0412-CAB5-EXT (5 m 16.40 ft) Extension Cable
is also available as an option.
CAN Flow Turbine:
Connecting the CAN sensor to the CAN Hydraulic Tester
a CAN Connection Cable and a CAN Terminating Resistor
is needed.
View Complete Details

Rotational Speed Sensors

  • Series PPC-04/12-SDS-CAB
Rotational Speed Sensors SDS-CAB
Rotational Speed Sensor PPC-0412-SDS-CAB
The PPC-0412-SDS-CAB Rotational Speed Sensor allows non-contact speed measurement of rotating components. The sensor is based on a opto-electrical measurement principle that determines the rotational speed with high-accuracy using a reflecting strip on the shaft.

The contact rotational speed measurement is obtained by using a Contact Adaptor that is mounted to the sensor, and which makes contact with the rotating component during measurement. This also produces high-accuracy measurement results. In the case of espacially small areas, using the focusing adaptor facilities measurement.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • C Y (Stauff South East Asia Sdn Bhd)
  • No. 8, Jalan SS13/6A Subang Jaya Industrial Estate, Malaysia
  • Share us via