Post Buy Requirement
KT
Johor, Malaysia
Add Review

Other Products / Services

HDPE Pipe

HDPE (Polythylene) Pipe

High Density Polyethylene Pipe (HDPE) is a thermoplastic pipe made from material that can be melted and reformed. It is rugged, flexible, and durable. It has outstanding chemical and environmental stress crack resistance.
Relative to existing infrastructure, like ductile iron, concrete or PVC, HDPE seems like a new product. In reality, it has been successfully used in a wide variety of piping applications for over 50 years.
The outstanding physical and performance benefits of HDPE pipe make it the perfect choice for your piping systems.
View Complete Details

Gabion

  • Standard Sizes 1m x 1m x 1m 1m x 1m x 0.5m 1m x 1m x 0.3m 2m x 1m x 1m 2m x 1m x 0.5m 2m x 1m x 0.3m
Gabion

Gabion boxes are made of heavy duty hexagonal wire nettings
Finish can be hot-dipped galvanized, galvanized aluminum alloy or PVC coated
Filled with rock or rubble to economically and effectively construct earth retaining walls and erosion control structures
KIMMU Brand Gabion Cages (Mesh 8)
Size: 1 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm
Heavy Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 2 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm
Heavy Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 3 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm
Heavy Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 1 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm
Standard Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 2 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm
Standard Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 3 (L) x 1 (W) x 1 (H) PVC coated Dia 2.2mm
Standard Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 1 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm
Heavy Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 2 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm
Heavy Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 3 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm
Heavy Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 1 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm
Standard Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 2 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm
Standard Galvanized
KIMMU Brand Gabion Cages (Mesh 8)
Size: 3 (L) x 1 (W) x 1 (H) Galvanized Dia 2.7mm
Standard Galvanized
View Complete Details

Rib Lath

  • Size 610mm W X 2200mm L X 0.35mm thk
Rib Lath

Expanded Galvd Rib Lath is Expanded Metal lath stiffened by longitudinal steel ribs, formed in the same sheet of metal. The mesh areas of the lath are expanded by cutting and stretching in the sheet of metal, the ribs being simultaneously roll-formed. The furring design of the mesh provides an excellent background plaster for construction of partitions, suspended ceilings and refurbishment works. The advantages of rib lath over metal lath is that the support centres can be increased or widened.
Applications:
Galvd Rib-Lath is extensively used:
As a Plaster Backgroud for:
Partitions
Structural (Steel Work Encasement)
Suspended Ceiling
Arch Formation
Construction Joint for Shallow
To refurbish damaged or aged masonry walls, Slab, Retrofiting work, etc.
Installation:
Galvd Rib-Lath must fixed with the apexes of the ribs in contact with the support or the backing.
Galvd Rib-Lath should be lapped at the sides wire tied at intervals not exceeding 150mm.
At the end of the sheets, the Galvd Rib-Lath should be overlapped with at least 100mm (4 ).
View Complete Details

Hy Rib

Hy Rib

Hy-Rib is an expanded metal sheet product, specifically developed for use as permanent formwork to concrete. The profile of the open mesh, in combination with the Hy-Rib tangs, allow the development of dense concrete nodules and indents on the face of the Hy-Rib, forming an enhanced mechanical key for the second phase pour. In the case of visible elements, the resulting Hy-Rib surface is suitable to receive a rendered or tiled finish.
Hy-Rib is primarily used in construction joint applications but it is also used to form wall, beam & column surfaces and slabs soffits, where the formed surface will not be seen. For over 80 years Hy-Rib has been successfully used as permanent formwork on innumerable building & infrastructure projects, throughout the world.
Hy-Rib has an enviable portfolio of technical data. Independent bodies have undertaken full scale testing programmes to determine and verify Hy-Ribs effectiveness in forming construction joints. The result is a product with well defined engineering properties, established formwork pressure characteristics and measured improvements to the joint performance. Hy-Rib is certified for use as permanent formwork by the British Board of Agrment (BBA).
View Complete Details

Razor Barbed Wire

  • Outside Diameter 450mm
  • No. of Loops 33
  • Standard Length per Coil 7-8M
Razor Barbed Wire

We can produce razor type barbed wire in concertina coils of different blade types and specifications. Special specifications for concertina coils or straight type razor wire are available on request.
View Complete Details

Rebar Stirrups

  • Materials Cold Rolling Steel, Hot Rolling Steel
  • Diameter 5 – 12mm
  • Longest Stirrup edge 2000mm
Rebar Stirrups (Cut & Bend)

Stirrup reinforcing is a major factor in adding strength to concrete support columns. Though concrete is strong by itself, its even stronger with steel bars running through its length. To ensure that this composite material is as strong as possible, engineers use stirrups, also made of steel, to keep everything straight and in order when the mixed concrete is poured.
Assembly
Stirrups are separate from one another. Rebar is placed into the base where the concrete will be poured. The stirrups, which are little more than square bands, are placed around the steel rebar at regular intervals to strap them tightly into a given shape. This forms a skeletal square or rectangular column inside the mold. The concrete is poured over the skeleton, embedding it inside the column.
Resistance
The stirrups provide resistance, which is more specific than strength. The concrete and the rebar are supporting the load coming down on the column from above. The stirrups act like tendons, keeping things together when theres pressure and flexing. Though not essential, the stirrups are definitely helpful. Theyre also used in beams, which are laid horizontally rather than vertically as columns are.
View Complete Details

Hard Drawn Wire

  • Diameter Size (mm) 1. 60 – 11. 00mm
Hard Drawn Wire

Hard-drawn wire is the most basic and affordable steel wire available. The term hard-drawn simple means the steel has been drawn though the die to the desired diameter with no additional processing or tempering. Hard drawn wire is most commonly used in shelving, automobile parts, and shopping carts.
COMMON USES FOR HARD-DRAWN WIRE

One of the most versatile steel wires, hard-drawn wire is suited to a wide range of applications for manufacturing. These include:
Automobile parts
Shopping carts
Baskets
Shelving
Hooks
Safety pins
Washer springs
Overhead transmission wire
and many others
Material: Low Carbon Mild Steel Wire
Application: Mesh fabrication, Nails Manufacturing, Racks, GI wire and more.
Diameter Size (mm) : 1. 60 11. 00mm
Packing: 100-1000kg
Tensile Strength: 450N mm2 and above
View Complete Details

Black Anneal Wire

  • Color Black
Black Anneal Wire

Material and technical
We produce the annealed wire with high-quality low carbon raw materials through wire drawing, anneal process.
Its soft and has good stretching resistance. The finished products are smeared with slushing oil. So they are not apt to rust.
Specification and Usage
Standard specification: Wire diameter from 1.6mm-5.0mm
Main purposes
Building and fire organizations for black fiber cloth such as silk and silk tie made from high-quality wire, primarily for the construction industry and for tying silk tie lines.
Packing
We can tie up the products according to customers requirements, ranged from1 to 500 kg each bundle.
Serial products
U type carbon steel wire, and staight cut wire is mainly used as tie wire or binding wire in construction.
View Complete Details

Mattress

  • Standard Sizes 6m x 2m x 0.5m 6m x 2m x 0.3m 6m x 2m x 0.23m
Mattress

Gabion Mattresses are used for permanent erosion control in channels, stream banks, spillways and stable slopes from surficial erosion. The stone confinement within the units allows for higher shear stress resistance than riprap. Made of PVC coated galvanized wire, gabion mattresses are divided into compartments and filled with stones at the project site. With lids closed, the gabion mattresses form flexible, permeable, monolithic structures. Considered a robust alternative to rip-rap, gabion mattresses offer long term performance against aggressive flow conditions and do not rely on vegetation for their hydraulic performance.
Advantages of Gabion Mattresses:
Environmental Friendly
Easily Assembled
Permeability
The lid is supplied as a separate panel
View Complete Details

Extruded Polystyrene Foam

  • Thickness (mm) 25mm and 50mm
Extruded Polystyrene Foam (XPS)

EXTRUDED POLYSTYRENE FOAM is a Hard Type extruded polystyrene thermal insulating products made of polystyrene combining with additives using extrusion method.
The board possesses a continuous and even external layer and completely closed honey-comb cells structure achieved during the continuous extrusion process.
The board is an excellent thermal insulating material with high compression strength, low coefficient of thermal conductivity, low water absorption rate, low vapour permeance, long life because of its uniform wall thickness of linked honey-comb structure and without any gap. The characteristics are the quality of an excellent thermal insulating materials.
The excellent performances of thermal insulation, high compression, water proofing make the board to be superior to conventional thermal insulating material, and suitable for use in new building or retrofit works.
Product Specification
Density (kgm) ASTM 1622 : 36 to 50
Compression Strength (kpa) ASTM 1621 : > 350
Water Absorption % (vv) ASTM C272 : > 0.1
Thermal Conductivity Wmk ASTM C518 : > 0.028
Diamensional Stability % : > 2.0
Colour : Blue or Pink
Size : Length (mm) : 1200mm
Width (mm) : 600mm
Thickness (mm) : 25mm and 50mm
View Complete Details

Building Safety Net

  • Size 1.8m x 5.1m
Building Safety Net

Building Safety Net is made from high density polyethylene(HDPE). We should use high technics to draw the wire first, then weave the wire in specific way. After weaved, we add rope and tether on the side of the netting. There are also burning-resist components in the plastic safty purse netting it can avoid occuring unexpected fire.
Model A : Whole Green (Mix Material)
Model B : White Label (New Material)
Usage:
To protect the workers who works on the top of the building.
To prevent person or stone dropping on the earth directly.
To keep the field clean.
View Complete Details

Lattice Girders

Lattice Girders

A lattice girder is a type of girder with a criss-crossed web design, such as in gardening lattices, between the two edges of the girder.
It is manufactured using high strength steel wire which provides rigidity to the panel and enables it to bind easily with in-situ concrete which is poured later on site.
They are lightweight and can be easily assembled on uneven floor and wall surfaces with few workers.
The Lattice Girders are used mainly as reinforcement of prefabricated slabs and beams, where concreting is performed in two stages, offering the advantage of avoiding scaffolding and formwork needed in traditional construction. Therefore Lattice Girders are best suited when slab reinforcement is generally light, while at the same time fast and no-formwork construction is needed.
View Complete Details

Plastic Sleeving

  • Model CF_PS_C16
  • Outer Diameter (mm) 16
  • Packing Quantity (Pcs/Bag) 3000
Plastic Sleeving

Plastic Sleeving are used at the end of the PVC tube or cone holdingcast in the same distance and prevent them from any leakage.
Due angles and gap at the end can be filled easily by filling materials.
Category: Construction Fittings.
View Complete Details

Form Tie

  • Model Number Form Tie
  • Diameter (mm) (B) 9 (Yellow Zink Galvanized)
  • Length (mm) 250
  • Packing Quantity (Pcs/Ctn) 100
Assembly Of Form Tie

The Form Tie system prevents breakage in the formwork, thus keeping concrete structures in good shape without discolouration. Besides ease of assembly and removal, the system saves construction costs as all parts are reusable except for the separator, which is casted into the wall.
View Complete Details

Pvc Barbed Wire

  • Size (SWG) 11
  • Diameter (mm) 2.70
  • Barb spacing 4 inches
PVC Barbed Wire

Barbed wire, also known as barb wire, is a type of fencing wire constructed with sharp edges or points arranged at intervals along the strand(s). It is used to construct inexpensive fences and is used atop walls surrounding secured property. It is also a major feature of the fortifications in trench warfare.
A person or animal trying to pass through or over barbed wire will suffer discomfort and possibly injury. Barbed wire fencing requires only fence posts, wire, and fixing devices such as staples. It is simple to construct and quick to erect, even by an unskilled person.
View Complete Details

Galvanized Barbed Wire

Galvanized Barbed Wire

Barbed wire, also known as barb wire, is a type of fencing wire constructed with sharp edges or points arranged at intervals along the strand(s). It is used to construct inexpensive fences and is used atop walls surrounding secured property. It is also a major feature of the fortifications in trench warfare.
A person or animal trying to pass through or over barbed wire will suffer discomfort and possibly injury. Barbed wire fencing requires only fence posts, wire, and fixing devices such as staples. It is simple to construct and quick to erect, even by an unskilled person.
View Complete Details

Wire Mesh Roll

  • KIMMU Ref. No. 610
  • Wire Diameter (mm) 2.00 – 2.50
  • Width (m) 1.80 – 2.00
Wire Mesh Roll

Solid rolled format to provide exceptionally strong reinforcement for your construction needs.
View Complete Details

Steel Bar

  • Length 12 meter as Standard or Customize
  • Bar Size (Diameter) 10, 12, 16, 20, 22, 25, 28, 32 and 40mm
  • Grade 250 , 460 and 500
Steel Bar

A rebar (short for reinforcing bar), also known as reinforcing steel, is a common steel bar, and is commonly used as a tensioning device in reinforced concrete and reinforced masonry structures holding the concrete in compression. It is usually formed from carbon steel, and is given ridges for better mechanical anchoring into the concrete.
Metric bar designations represent the nominal bar diameter in millimetres. Bars in Europe will be specified to comply with the standard EN 10080 (awaiting introduction as of early 2007), although various national standards still remain in force (e.g. BS 4449 in the United Kingdom).
View Complete Details

Bekaert Dramix 3D Steel Fibers

  • Series Dramix
Bekaert Dramix 3D Steel Fibers

Ever since its introduction now more than 40 years ago the single hook Dramix series has been the reference in steel fiber reinforcement, and is still outperforming competitors today.
Bekaert Dramix 3D Steel Fibers For Concrete Reinforcement


The reference in steel fiber concrete reinforcement
Dramix 3D is the new name for the existing range of Dramix steel fibers, which throughout the years have become the reference in steel fiber concrete reinforcement.
Still the best performing fiber on the market
Combining high performance, durability and ease-of-use, Dramix 3D steel fibers offer a time-saving and cost-efficient alternative to traditional concrete reinforcement solutions. It is still widely considered as the best performing steel fiber around.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Tan (Kimmu Trading Sdn. Bhd.)
  • TL 60, Batu 2, Jalan Minyak Beku Batu Pahat, Johor, Malaysia
  • Share us via