Our Products #4998003

We supply Ingot Molds (for Bottom Pouring & Specialty Metal Casting) slag pots and Graphite crucibles to the Steel and Iron Industry in both ferrous and non-metallic materials compositions as follows:

Quality Grades GCA95 ECA95

Description Gas Calcined Anthracite Electrical Calcined Anthracite

Ash 4.0% Dry 4.0% Max Dry
Volatile Matter 0.7% Dry 0.4% Max Dry
Fixed Carbon 95.3% Dry 95.6% Min Dry

Sulphur 0.15% Dry 0.35% Max Dry
Nitrogen 0.40% 0.25% Max
Hydrogen 0.20% 0.25% Max

Moisture 0.30% 0.5% Max

Real Density 1.84 gcm3 Min
Electric Resistivity 500 +- 50

Size 1 - 5 mm +1mm 90%
2 - 6 mm +4mm 70%
3 - 8 mm +10mm 8%

We supply a full range of Carbon and alloy steels for general & specific applications customized to users requirements and delivered to worldwide markets.

1. Carbon Steels (Bars, Wire Rods, Blooms, Billets and Slabs). (AISISAE 10051524 series).
2. Merchant Quality M Series Carbons for strip and sheet. (AISISAE M1008M1044)
3. Carbon Steels for Sheet and Strip. (AISISAE 10061552)
4. Resulfurised Carbon Steel (Bars, Wire Rods, Blooms, Billets and Slabs). (AISISAE 11081151)
5. Carbon HSteels (Bars, Wire Rods, Blooms, Billets and Slabs). (AISISAE 1038H5B62H)
6. Alloy Steel (Bars, Wire Rods, Blooms, Billets and Slabs). (AISISAE 133094B30)
7. Alloy Steel for Strip and Sheet. (AISISAE 41188620)
8. Alloy Steel for Plate. (AISISAE 13308742)
9. Alloy HSteels (Bars, Wire Rods, Blooms, Billets and Slabs). (AISISAE 1330H94B30H)
10. Stainless and Heat Resistant Steels (Austenitic, Austenitic-Ferritic, Ferritic Chromium, Martenistic-Chromium Steels).
11. Tools Steel (M, Molybdenum, M1-M62., T, Tungsten T1-T15, HOT WORK H, H1-H19, Chromium, H20-H39., Molybdenum, H40-H59, COLD WORK, D1-D7).
12. Electrical Steel: Non Oriented and Grain Oriented types. (ASM 677., ASTM A683., ASTM A876)

9810CXii is a resin bonded high purity density Magnesia (Fused MgO > 98%) & natural flake graphite (C > 97%) brick with dual metallic anti-oxidants for maximum resistance against oxidation & slag reactions.



MT4 is a resin bonded high purity density Magnesia (Fused MgO > 98%) & natural flake graphite (C > 97%) brick with dual metallic anti-oxidants for maximum resistance against oxidation & slag reactions.





AMG6010 is a resin bonded high purity density Alumina (Fused AL2O3 > 97%) & natural flake graphite (C > 97%) composition with metallic anti-oxidants and is characterized by its high strength and oxidation resistance properties in a severe and extended heat life operating conditions.

9810CXii is a resin bonded high purity density Magnesia (Fused MgO > 98%) & natural flake graphite (C > 97%) brick with dual metallic anti-oxidants for maximum resistance against oxidation & slag reactions.



MT4 is a resin bonded high purity density Magnesia (Fused MgO > 98%) & natural flake graphite (C > 97%) brick with dual metallic anti-oxidants for maximum resistance against oxidation & slag reactions.





AMG6010 is a resin bonded high purity density Alumina (Fused AL2O3 > 97%) & natural flake graphite (C > 97%) composition with metallic anti-oxidants and is characterized by its high strength and oxidation resistance properties in a severe and extended heat life operating conditions.

9718CXii is a premium grade resin bonded high purity fused Magnesite (MgO > 97%), EAF brick with natural flake graphite (C > 97%) and , metallic anti-oxidants to display the high resistance properties against oxidations and slag erosions for extended heat life applications.

AMC-70AS is a resin bonded high purity fused Alumina (AL203 > 95%), Magnesite (MgO > 97%) brick with natural flake graphite (C > 96%) and metallic anti-oxidants for use in the barrel and sidewalls.

HL71 & GL65 are dense and high purity bauxite composition with low alkaline & fine grains aggregates fired to high strength properties for teeming of high quality alloy & specialty steel in large bottom pouring operations.

FC35 is a dense and high purity bauxite composition with low alkaline & fine grains aggregates fired to high strength properties for teeming of high quality alloy & specialty steel in small to medium scale bottom pouring operations.

Applications:
Coke Oven Battery
Hot Blast Stoves
Rotary Calciners
Glass Industry


Characteristics
Low Alumina (Super Duty)
Volume Stability
Flux & Spalling Resistance
High Density
Normal, Special & Customized (Hand-made) Shapes

BAUXITE (AL2O3 80%-88%, Low Alkalis & High Density)
CALCINED FLINT CALY (AL2O3 45%, Low Iron, High Density
CALCINED MAGNESITE (MgO 80%-90%)
DEAD BURNT MAGNESITE (MgO 90%-98%, C.S. Ratio: 2.1, High Density)
ELECTRO-FUSED MAGNESITE (MgO 97-98%, C.S. Ratio: 2.1, High Density)
ELECTRO-FUSED AL-MgO Spinel MgO-Spinel AL-Chrome Aggregates
ELETRIC FURNACE BOTTOM MIX
EBT FURNACE BOTTOM FETTLING (High Iron, High MgO) MIX
BROWN FUSED ALUMINA WHITE FUSED ALUMINA (AL2O3 80%-97%, Low TiO2)
ELECTRO FUSED SILICON CARBIDE (90%-98%)
Natural Flake Graphite (C 90%-97%, coarse to fine mesh)
Amorphous Graphite
ALMg Metallic (97% 98% Powders), . ALSi Metallic Powders (98%)., AL Metallic Powders
Magnesium Cones (Mg 96%)

Asbestos Free Insulating Materials

Insulating Fibers (Torpedo Cars, Foundry use)
Insulating Gaskets (Ingot Molds, Foundry use)
Insulating Boards (Hot Face Linings, Furnace & Kilns)
Insulating Clothes (Furnace, Fire Insulation)
Insulating Ropes (Stoves & Ovens, Seals)





Other Specialty Products

Cordierite & High Alumina Filters for , metal casting
Pouring tubes, Deltas & Impact pads

BAUXITE (AL2O3 80%-88%, Low Alkalis & High Density)
CALCINED FLINT CALY (AL2O3 45%, Low Iron, High Density
CALCINED MAGNESITE (MgO 80%-90%)
DEAD BURNT MAGNESITE (MgO 90%-98%, C.S. Ratio: 2.1, High Density)
ELECTRO-FUSED MAGNESITE (MgO 97-98%, C.S. Ratio: 2.1, High Density)
ELECTRO-FUSED AL-MgO Spinel MgO-Spinel AL-Chrome Aggregates
ELETRIC FURNACE BOTTOM MIX
EBT FURNACE BOTTOM FETTLING (High Iron, High MgO) MIX
BROWN FUSED ALUMINA WHITE FUSED ALUMINA (AL2O3 80%-97%, Low TiO2)
ELECTRO FUSED SILICON CARBIDE (90%-98%)
Natural Flake Graphite (C 90%-97%, coarse to fine mesh)
Amorphous Graphite
ALMg Metallic (97% 98% Powders), . ALSi Metallic Powders (98%)., AL Metallic Powders
Magnesium Cones (Mg 96%)

We supply Ingot Molds (for Bottom Pouring & Specialty Metal Casting) slag pots and Graphite crucibles to the Steel and Iron Industry in both ferrous and non-metallic materials compositions as follows:

Quality Grades GCA95 ECA95

Description Gas Calcined Anthracite Electrical Calcined Anthracite

Ash 4.0% Dry 4.0% Max Dry
Volatile Matter 0.7% Dry 0.4% Max Dry
Fixed Carbon 95.3% Dry 95.6% Min Dry

Sulphur 0.15% Dry 0.35% Max Dry
Nitrogen 0.40% 0.25% Max
Hydrogen 0.20% 0.25% Max

Moisture 0.30% 0.5% Max

Real Density 1.84 gcm3 Min
Electric Resistivity 500 +- 50

Size 1 - 5 mm +1mm 90%
2 - 6 mm +4mm 70%
3 - 8 mm +10mm 8%