Our Products #5346893

The MM7025 is an ideal two-channel power amplifier with whopping 140W RMS into 8 ohms per channel.

Use it in an AV setup to give your front channels an earth-moving boost or in combination with a HiFi Pre-Amplifier to create a high quality 2 Channel System.

Current Feedback amplification is a well known, Marantz original circuit technology. The Current Feedback amplifier technology fits perfectly with the high requirements set for Super Audio software providing wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited resulting in a very low phase shift. Marantz receivers and amplifiers equipped with Current Feedback can keep the phase compensation via Negative FeedBack (NFB) to a minimum, resulting in high through-rate, excellent transient response and superb sonic transparency for the full bandwidth. Unlike conventional Voltage Feedback amplification, the Current Feedback amplification makes the power amplifier in-sensitive to difficult loudspeaker loads.

On paper an electrical component might look excellent but the result may fall short of the combined design expectations. Marantz selects the appropriate components for the specific design application. In some cases its simply not possible to use standard components that meet the high Marantz standards. These components will then be specially made for Marantz in close cooperation with the Marantz engineers.

A DC trigger is an assignable voltage output which can automatically control for example an electrical projection screen, lowering it when the DVD input is chosen on the receiver.

TRAKTOR KONTROL S5 is a 4-deck all-in-one DJ controller built to feel familiar, right from the start.

Time-tested features fuse with innovative high-res displays and touch-sensitive controls to channel your creativity. And with essential Stems control, experience modern DJing in a compact, rock-solid system.
HIGH-RES DECK DISPLAYS

TRAKTOR KONTROL S5's two high-res displays put TRAKTOR PRO 2 software in plain sight directly on the hardware.

Browse for the next track, monitor effects, see Stems play as four stacked waveforms, and more all in vivid color. Just touch a knob and watch TRAKTOR respond on the displays smart views, pop-up panels, filters, and effects values are instantly revealed by touch-sensitive knobs.

Includes TRAKTOR software
STEMS-READY
Stems is a completely new way to DJ.

A Stem file is an open, multi-channel audio file that contains a track split into four musical elements bass, drums, vocals, and melody for example. With each element available independently, you can mix in ways that just werent possible until now.

Create instant track edits, mash-ups, a cappellas, and more by bringing different Stem parts in and out of the mix. And re-think the way you use effects add effects to the vocals, and leave the rest of the track dry, for example.

TRAKTOR KONTROL S5 deck sections are purpose-built for mixing with Stems.

Professional multi-purpose headphones amplifier system for stage and studio applications
Highest sonic quality with virtually all types of headphones even at maximum volume
8 totally independent stereo high-power amplifier sections in one rack space
2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
8 independent Direct inputs provide up to 8 individual stereo mixes
Output level control and accurate 8-digit LED output meter per channel
Monostereo switch per channel for more flexibility
1 front and 1 rear TRS phones connector per channel
Direct input connector on each channel for easy connection of any sound source
Parallel Main outputs allow cascading of several headphones amplifiers
Toroidal transformer for noiseless operation and low magnetic interference
High-quality components and exceptionally rugged construction ensure long life

his is a no-fuss 250w constant voltage amplifier, ideal for a variety of installed environments.

XLR input on the rear (with parallel XLR line-level output for looping extra amplifiers in your signal chain).

All outputs are via barrier strip, where you can choose between 100V, 70V, 4 or 8 operation.

There is rear panel level control (recessed, screwdriver access), and a temperature sensing fan for cooling. Internal current limiting helps with protection against both overload and overdrive situations.

No mains power? No problem, it can run via 24V DC if that's what you've got to work with.

A solid performer with enough features to make sure the job simply gets done.

Features:

Balanced XLR line level input with parallel output
Present LED
Rear panel level control
Temperature Sensing Fan Cooling
Auto limiting protection
100V, 70V and 8 ohm outputs
2RU
240V AC 24V DC operation

Aphex Headpod4 features:
Professional Monitoring for all headphone types
Individual volume controls
High headroom (no clipping at high headphone levels)
Durable metal jacks
Ultra low distortion & wide frequency response
Master volume to match source level
Ultra low crosstalk
Works from any analog source
SPDIF Input
Top panel input selection
Listen longer with less fatigue
Overcomes limitations of typical headphone outputs
Four independent stereo power amplifiers
Small size travels easily

Real analog sounds created with reference to classic rhythm machines
Maximum effect from minimal parameters - a unique advantage of analog
PCM sound engine expands possibilities when used with analog sounds
Loop sequencer distilled from the Electribe series

The Electribe series step sequencer
Stutter function generates repeated triggers that dramatically change the sequence
Active Step function generates new bass lines by removing or inserting steps.
Step Jump function instantly plays only the step you're pressing
Convenient functions for incredible ease of use

SYNC jack and MIDI IN connector allow synchronized performances with multiple units or with your DAW
Compact size, battery-powered operation, and built-in speaker for enjoyment anywhere

From the Behringer website:

Premium ultra-low noise, high headroom analog mixer
2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic "British" 3-band EQs for warm and musical sound
1 post fader FX send per channel for external FX devices
1 stereo aux return for FX applications or as separate stereo input
Main mix outputs plus separate control room, phones and stereo CDtape outputs
CDtape inputs assignable to main mix or control roomphones outputs
High-quality components and exceptionally rugged construction ensure long life

Features:

Fits any large-diaphragm recording microphone with a diameter between 18 and 68mm
USM offers up to 12dB better isolation against unwanted vibrations
Pop Filter provides up to 20dB pops and thumps attenuation, with no HF loss
Suitable for Large Diaphragm studio microphones

Specs:

Mic diameter: 18-55 mm
Microphone length: up to 300 mm
Maximum Weight (vertical): 750 g
Maximum weight (horizontal): 500g
Suspension Rotation (maximum): 175

Features:
Classic appearance, modern performance
Frequency response tailored for speech, vocals and instrumental music
Cardioid directional pattern for optimum performance in adverse acoustic environments
Shock-mounted cartridge minimises stand-transmitted noise, ensures quiet operation
Rugged die cast casing for reliability under rigorous conditions
Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backward

Yes, HD32A is a portable, powered speaker - but we like to think of it as more of a portable weapon! Like other members of RCF's HD powered speakers (HD10A, HD12A), you can plug a microphone directly into the back of this one.

By using a pair of these as your Front of House speakers, you'll be doing just fine. With 1400w peak power delivering 131 dB Max SPL, the 2" titanium dome compression driver (with a 3" voice coil) is the not-so-secret ingredient to help get your vocals soaring where they need to.

HD32A weighs in at 18.6 kg, and looks set to be a big part of the future for RCF powered speakers.



Features:

1400 Watt peak, 700 watt RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
131 dB MAX SPL
RCF Precision 3.0" voice coil compression driver, titanium dome
RCF Precision 12" woofer

The layout of the XDJ-RX2 has also changed in a way that brings it more in line with the Pro CDJ and XDJ units. The mixer section has also been rearranged to more accurately represent the layout of the DJM-900NX2 and other pro DJ mixers, and is very similar to the DJM-450. Any DJs using a pro Pioneer setup when playing out in the club and then using the XDJ-RX2 for practice at home won't have to think twice anymore when finding the features they want - everything will be second-nature.

Changes to the layout include:



Cue buttons are now placed above their respective channel and a master cue button has been added.
Master and booth levels are now at the top of the mixer section
The browse knob and buttons have been moved to the right-hand side of the touchscreen
The BrowseTag ListInfoMenu buttons have been moved above the touchscreen


Hot new features you can expect from the XDJ-RX2 are:
A 7-inch full-colour touchscreen, in-line with the XDJ series

8 performance pads on each deck, in-line with the DDJ controller series - these can be used for tactile control of 8 Hot Cues, Beat Loop, Slip Loop and Beat Jump.

A parameter knob enabling you to control the sound colour effects

Track filter, short cut and QWERTY keyboard features can be used to search for tracks

Needle search via the touch screen

Beat FX controls have been added

There are now 2 MIC inputs

Professional 4 Channel DJ mixer
The Pioneer DJ DJM-900NXS2 features Pioneer DJ's first ever 64-bit mixing processor for a warmer, more nuanced sound along with fine-tuned EQ, fader curves and enhanced the FX controls. Plus the DJM-900NXS2 has an independent SendReturn, 4 phono inputs and 2 USB ports.
To use the DJM900NXS2 with Serato DJ you'll need to purchase the Serato DJ Club Kit license bundle. This will give you access to Serato DJ's professional features, and the DVS expansion pack for Serato NoiseMap Control Vinyl or CD support.
For optimum performance make sure you have the latest DJM900NXS2 firmware and drivers.