Post Buy Requirement

Other Products / Services

Gravity Flow Valves

  • Category Flow Control

Ideal for handling dry bulk material in gravity flow, dilute phase or dense phase pneumatic conveying applications. Enge Plas range of gate valves are designed and engineered with two main principals in mind: extend the service life of the valve and perform maintenance without taking the valve out of line Our valves serve many industries including chemical, cement, coal, food, frac sand, grain, minerals, petrochemical, pharmaceutical, plastics, polymer, rubber and mining.

View Complete Details

Feeders Dosing Systems

  • Category Weighing Batching, Feeding Dosing
Feeders and dosing systems are often classified by the metering device employed to discharge material into the process. Each device is engineered to handle specific types of materials and the challenges they present. Most of these material delivery methods may be configured for use in volumetric or gravimetric modes.
View Complete Details

Extruders

  • Category Sensors Monitoring,
Enge Plas provides total solutions for the processing technology from raw material feeding to the entire downstream periphery, from throughput rates of 1 kgh to 100 th. With individual adaptation to our customers applications we are able to guarantee maximum throughput rates at the greatest possible economy and quality for our extrusion machines and plants.
View Complete Details

Screening Machines Sifters

  • Category Screening
Enge Plas offers a wide range of screening, sifting and classifying technologies to meet the needs of different industries, from vibration and long-stroke screening machines to centrifugal and vertical sifters, each type available in various models and sizes, with single- or mult-deck execution for all applications.

Tailored to special requirements, our machines offer good customer benefit and are very well accepted due to their efficiency, reliability and ease of operation, low noise emission and high separation quality.High levels of selectivity of up to 98%
Product-protecting screening process
Low noise emission
Low energy consumption (e.g. 0.75kW at a screening surface of 1.5m)
Easy sieve replacement and quick cleaning
Long service life with low input and maintenance effort
View Complete Details

Modular Silos

  • Category Storage Filling
  • Size 6, 750
From huge site-assembled outdoor aluminium or stainless steel constructions with sizes up to 6, 750 m3 to small modular indoor galvanised or stainless steel constructions with sizes down to 1.3 m3, Enge Plas has the experience and track record of safeguarding your material.Wide range square or round, in aluminium or galvanised steel or stainless steel, for indoor and outdoor use. All sizes.
Transport equipment and accessories also available.
Delivered as standard with a steel cover, inspection hatch, inspection window, manually operated closing damper and heat-treated wooden packaging.
Protected from entry of pests and can be cleaned with a high-pressure cleaner.
Ensures excellent hygiene whether storing feed, food, granulates or wood pellets.Cereal
Meal Feed
Pellets
Granules
Minerals
PillerModular silo square or rectangular
Agrosilo square or rectangular
Mineral silo
Auger Discharge Silo
Clean silo
Outdoor Modular Silo
Round steel silo
View Complete Details

Shredders Granulators

  • Category Size Reduction
Our shredders and granulators small, medium, large and heavy-duty cover regrind throughputs from a few kilos per hour up to several tones per hour. By examining products and the amounts involved, we can help you select the right shredder or granulator and handling accessories best suited to your particular needs.Injection Moulding
Blow Moulding
Pipes & Profiles
Film & Sheet Extrusion
Thermoforming Extrusion
Edge-trim Granulation
Fibre Separation
General Recycling
Post Consumer Recycling
Rubber
E-Waste
Wood
and many moreDust separating systems
Guillotine systems for quicker recycling of edge trimmings
Metal detectors to prevent machine damage
Metal separators to remove metal from material
Noise control systems that can reduce as much as 1020 dB(A)
View Complete Details

Samplers

  • Length 55
  • Category Sensors Monitoring, ControlInstrumentation
Enge Plas supplies zone samplers used for taking samples of bulk goods of any kind.

The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts.

The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks.

Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.

Smallest possible gap between the inner and the outer tube
Easy cleaning, removable tip
Colour coding (Multi and Uno sampler)
Ultra-pure materials
Excellent processing, robust model
View Complete Details

PressureTemperature Sensors

  • RANGE Ceramic isolation
Pressure transducers operate on the proven principle of strain gauge technology. The pressure is transferred from the measuring diaphragm (which is flushed with the melt channel) via a capillary system to a second diaphragm. The capillary system is filled either with mercury or with a mercury-free medium. The second diaphragm is fitted with a strain gauge. Using the linear change in resistance in relation to deflection, an electric output signal is provided. The special membrane technology guarantees a very long operating life, even under the toughest conditions. The anti-adhesion coating reduces the risk of damage caused by frozen plastic melts.

Our range of temperature sensors features proven thermocouple or resistance temperature measurement systems in a high precision but robust sensor. The Fe-CuNi (type J or L) thermocouples which generate a voltage when heated are well established in the industry due to their advantages thanks to the high Seebeck coefficient. For such applications, type K thermocouples are also available (NiCr-Ni). Additionally, our PT100 (2, 3 or 4-wire) resistance temperature sensors have resistance of 100 Ohm at 0C which changes with increasing temperature. Conforms to EUROMAP 31.Standardized output signal
Integrated amplifier
Integrated temperature measurement
Heated sensor tip
Explosion-proofCeramic isolation
All-metal design
View Complete Details

Purging Agents

  • Category Instrumentation
Enge Plas supplies a mechanical purging agent that enables the safe, effective and efficient cleaning of plastics processing equipment.

Metal surfaces are cleaned using a unique scrubbing effect. The material is not abrasive to screw, barrel, die etc.For injection moulding (except where openings are less than 1.5mm)
For extrusion, blow moulding, and injection moulding with openings less than 1.5mm
For hot runner systems with a minimum clearance of 0.75mm
Used in unblended form (i.e. at 100%) in extrusion and compounding processes. Provides a gentle scrubbing effect to the screw and barrel and removes build up of carbonised material. It softens but does not melt, therefore it provides a scrubbing effect it does not scratch or wear the screw or barrel.
Particularly useful when changing colour, polymer, or when screw and barrel are carbonized. Enables rapid purging of the previous colour andor polymer, so that machine downtime and loss of expensive polymer is minimized.
Suitable for injection moulding, extrusion and blow moulding processes.
Cost effective, as only a small amount is required, usually at 20% add rate to the polymer.his granular material is blended in with a small amount of the polymer that you are using and fed into a starved screwbarrel. The blended material is processed through your equipment at similar temperatures and revs to typical run conditions for the carrier polymer. The material softens slightly, but does not melt, and thoroughly loosens carbonized and degraded resin, allowing the polymer to flush out the system.

This makes it particularly useful for:

Cleaning colour from your equipment
Cleaning polymer from your equipment
Removing carbon build-up and black specks
Regular preventative maintenance
Before manual cleaning
View Complete Details

Lab Equipment

  • Category Sensors Monitoring, Control Instrumentation
Enge Plas provides a wide range of laboratory equipment.Range of Application
Used for mixing powdery to granular products.
Also applicable for dyeing plastics, for mixing solid and liquid media andor similar duties.
Features
in modern soft design
easy handling
control unit for simplified operation
possibility of using different mixing cylinders
simple exchange of the mixing cylinders
easy cleaning
View Complete Details

Fill SEAL MACHINES

Enge Plas offers plastic compounders reliable and innovative solutions to meet the challenging demands of automatic packing systems with our form fill seal machines, especially when frequent product changeovers are required.

We have the know-how along the entire process chain to ensure maximum customer benefits. Easy integration of packaging equipment into customers process and workflow is therefore essential for us.
View Complete Details

Mixers Blenders

  • Category Mixing Drying
  • RANGE 3 litres up to 100, 000 litres
Enge Plas offers an extensive range of mixers and blenders. Our mixers & blenders are capable of processing a vast range of ingredients. We can design and build customised mixers which meet the specific process requirements of our clients, including ATEX compliant mixers.
View Complete Details

Metal Detectors

  • Category Metal Detection
We offer a range of metal detection technologies, applicable for conveyor belts, chutes and roll goods, bulk materials, pipe systems, including control units with touch-screen and networking capabilities for remote diagnostics etc.
View Complete Details

Mechanical Conveyors

  • Category Conveying
Whether powders or pellets, it is only with experience, knowledge and the right understanding of the complex behaviours of bulk materials that will get you a safely functioning and economically operating mechanical conveying system.

Enge Plas has been designing, building and installing mechanical conveying systems in many industries, over many years, moving many types of material in many challenging circumstances. The conveying technologies we utilise are already adapted today to the constantly increasing production capacities, conveying distances and heights.
View Complete Details

Diverter Valves

  • Category Flow Control
Ideal for handling dry bulk material in gravity flow, dilute phase or dense phase pneumatic conveying applications. Enge Plas range of diverters are designed and engineered with two main principals in mind:

extend the service life of the valve and
perform maintenance without taking the valve out of line
Our valves serve many industries including chemical, cement, coal, food, frac sand, grain, minerals, petrochemical, pharmaceutical, plastics, polymer, rubber and mining.
View Complete Details

Polymer Filtration Systems

  • Category Sensors Monitoring, Control Instrumentation
Enge Plas offers not only Filtration Systems, but also complete solutions, e.g. rheologically optimized melt filter-pump combinations. One focus of our work is the processing technical optimization of the integration of the individual components as well as of the line concept.Screen Changers
Filter Elements
Discharge ValvesFilm Sheet
Oriented Film
Flat & Cast Film
Foam Sheet
Blown Film
Fiber
Technical Yarn
Textile FiberFilament
Staple Fiber
Nonwovens
Spandex Manufacture
Semi-finished Products
Pipes
Sheet
Profiles
Tubes
Compounding
Resins
Monomer
Polymer
Recycling
Recycling in general
Pet Bottle Flakes
View Complete Details

Bulk Heat Exchangers

  • Category Sensors & Monitoring, Contro
In many handling processes of bulk materials it is necessary to thermally treat powders or pellets, ie to cool or to heat them.

The heat exchangers Enge Plas supplies is a high-efficient cost-saving apparatus, compact in design. For many industries, eg plastics, food, fertilizer or chemical, this offers an ideal solution for thermally treating the respective bulk materials.
View Complete Details

Flow Sensors

  • Category Sensors Monitoring
Enge Plas provides a wide range of superior solutions in level monitoring, solids flow detection and particle emission monitoring.

Contact us to learn more about Level & Flow Sensors
Category: Sensors & Monitoring, Control & Instrumentation, & Others
View Complete Details

Pneumatic Conveyors

  • Category Conveying
Pneumatic conveying systems transport powder, dust, pigments, granulated material, tablets, capsules, small parts etc. in an air stream under pressure or vacuum through hoses or pipes. They are easy to install and to operate. Even if leakages occur, no product can get into the environment.ressure (+ve) or Vacuum (-ve) conveying system
Dense phase or Dilute phase conveying system
View Complete Details

Fluidising Cones

  • Category Storage Filling
Fluidising cones are pneumatic discharge systems for poor free-flowing powdered bulk materials from silos and hoppers.Designed according to bulk materials properties and operating conditions (flow properties, silo size, storage period, etc.)
Prevention of segregation, bridging and funnelling by fluidising and mechanical effects.
Operation with air reservoir or pulsator.
View Complete Details

Magnetic Cartridges

  • Category Metal Detection Separation
Magnetic Cartridges and Grate Magnets are engineered to achieve balance between reach-out and holding force. Can be used in all industries.
View Complete Details

Screens Meshes

  • Category Screening
To ensure safe and efficient screening processes, material, aperture shape, weave, and screening machine must be optimally adapted to the products to be screened. Our range of screens and meshes comprises solutions for all types of screening machines and applications: classical screen sections made of high-tensile or non-corrosive stainless steels, as well as special self-cleaning screens and hybrid screen sections with wire cloth cast in polyurethane. No matter which screen type you select, high-quality materials and processing warrant not only optimum functionality but also maximum stability and lifetime.
View Complete Details

Aeration Pads

  • Category Storage & Filling
The aeration pad is an aeration device used to promote the flow of dry bulk powders from a storage vessel. It operates by continuously introducing air into the body of the dry powder.

When a powder is first conveyed into a storage vessel it is actually a highly aerated mixture of air and particulate. In this state the mixture flows quite readily. However, as the powder settles the solid particulate and air separate resulting in a decrease in volume and an increase in bulk density. In this deaerated state powders can behave more like a single large solid structure rather than a fluid-like mixture. By replacing the naturally lost air, the air to particulate mixture ratio is held thus maintaining the fluid like characteristic of the aerated powder.
View Complete Details

Rotary Valves

  • Standard Version 20°C up to 60°C
  • High temperature 220°C
Rotary valves are used for feeding bulk materials into pneumatic conveying systems and discharging out of hoppers and silos. We carry the largest product range worldwide, and are able to fulfil all requirements of a modern bulk handling plant in all sizes and pressure ranges.

Rotary valves for powders:
The advantages of our application know-how: Large inlet. Restriction free product flow. High degree of fill.
Rotary valves for pellets:
The advantages of Coperion valves for pellets: Patented anti-chopping inlet geometry. Safe starting under full product load.Chamfered Blades
Reduction of the surface by relief grinding
Decrease of the friction with powders
Scraper Blades
Scraper blades for scraping of build-ups in the housing bore
Used for adhesive and sticky products
Shallow Pockets (F-design)
For better discharge performance or volume reduction
Used for adhesive and slightly cohesive products
Seal Purge
Gas purged labyrinth rings to protect the shaft seal at open end rotors for powder application
View Complete Details

IBC Systems

  • Category IBC Systems
When introduced in any manufacturing process, an IBC system represents just-in-time manufacturing, providing a systematic approach to the identification and elimination of wastage. Each IBC has a fixed volume of material it can hold, giving accurate batch accountability.

IBC systems can be cleaned off place, thus significantly reducing downtime cleaning. An IBC system is very flexible and mobile, and as your business grows, your existing IBC system can be easily expanded ensuring maximum reusability your existing assets.
View Complete Details

Big Bag Filling Units

  • Category Storage & Filling
Our filling systems are used in various industry and application sectors. Integrated in existing production processes, they ensure safe and profitable filling of jumbo bags.

Big bag filling units are suitable for filling commercial sizes of jumbo bags while at the same time carrying out calibrated weighing of powdery and granular products. Products are metered into the jumbo bag for example via metering screws, rotary valves or metering chutes. As an option, it is also possible to realize metering volumetrically via level indication without weighing system.Filling of big bags
Available with integrated weighing system
Available made of various construction materials
Wide range of additional equipment and special executions
As an option conformity to ATEX acc. to regulation 949 EC
View Complete Details

Dryers

  • Category Mixing & Drying
Enge Plas provides a diverse range of drying equipment dryers, drying hoppers and systems for general-purpose and special-market applications, with throughputs ranging from 1 to 2000 kg per hour.
View Complete Details

Big Bag Emptying Units

  • Model No. 94/9 EC
Emptying of Jumbo bags places many requirements on technology and personnel: dust-proof docking and emptying requires operationally safe & user-friendly solutions, and flexibility. Our big bag emptying units are based on individual application requirements and can be used up to OEB class 4.

Big bag emptying units are applied to dust free discharging and metering of bulk goods from Jumbo bags. Metering from the Jumbo bags is effected for example by means of metering screws, rotary valves or metering chutes. The big bag emptying unit can also be mounted on silos, mixers etc. for free-fall discharging.

The distinguishing feature of this unit is modular construction allowing subsequent modifications or changes.Emptying of big bags
Modular construction
Available with integrated weighing system
Available made of various construction materials
Wide range of additional equipment and special executions
As an option conformity to ATEX acc. to regulation 949 EC
View Complete Details

Knockers Vibrators

  • Category Storage Filling
Enge Plas offers Electro-pneumatically actuated discharge aid for weighing hoppers, silos etc.Electrical control implemented as a separate unit or incorporated into the overall control concept.
Robust design, low maintenance.
Easy to retrofit.
Can be combined with further beaters.
View Complete Details

Dust Collectors

  • Category Sensors Monitoring, Control Instrumentation
he purity of bulk materials is a critical factor in the quality of the end product. Regardless of whether the focus is on minimizing product degeneration, cleaning products perfectly or determining the residual dust to comply with standards Enge Plas solutions offer the optimal mix of many years of process competence and globally leading bulk materials expertise. Even at the design stage of the conveying plant, we ensure that dust generation will be minimized. For that reason, they select suitable pipe materials and flange connections and ensure conveying velocities to be in an acceptable range.

The use of hydraulic conveying systems is providing best results to meet the highest quality requirements. We have a range of equipment which includes sieves and separators for efficient cleaning of the product from dust and streamers.
View Complete Details

Cleaning Systems

  • Category Metal Detection Separation
Cleaning systems use magnetic and electronic separators to remove both ferrous and nonferrous contaminants efficiently from free-flowing virgin resins, regrind, and recycled plastics.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Shanmugam . (Enge Plas Automation Sdn Bhd.,)
  • 24, Jalan Lombong Emas 7, Malaysia
  • Share us via

( ! ) Warning: Cannot modify header information - headers already sent by (output started at /htmlcachedir2/dynamic-html-pages/eitempfilen/malaysia/company/enge-plas-automation-sdn-bhd/other-products.htm:44) in /home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php on line 59
Call Stack
#TimeMemoryFunctionLocation
10.0008458016{main}( ).../index.php:0
20.10902081744include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/country-vanity/country_index_page_common_script.php' ).../index.php:309
30.15012804488include_once( '/home/sgupta/exportersindia.com/htdocs/script-files/company-page/index.php' ).../country_index_page_common_script.php:282
40.17103740200header ( ).../index.php:59
ExportersIndia: 404 Error Found
404Oops! It seems this page is not available

We connect Buyers and Sellers

Tell us What you Need

Trending Categories

Find Suppliers by Region


View All Categories

Find Suppliers by Country

Waiting for permission
To search by voice, go to your browser settings and allow access to microphone

Allow microphone access to search with voice