Post Buy Requirement
AN
Selangor, Malaysia
Add Review

Our Products

  1. Cabinets & Enclosures 7 Products available
  2. Testing Equipments 4 Products available
  3. Distribution Point Box 4 Products available
  4. Adaptors, Plugs And Sockets 4 Products available
  5. Packaging Seals And Caps 7 Products available
  6. Power Connectors 9 Products available
  7. Data Converters 3 Products available
  8. Others 53 Products available

Other Products / Services

FTDC PULL OUT SPLICE MODULE

  • Model Number LTOC-FTDC-XXS-YY
The FTDC Splice Module is a rack-mountable module that contains splice drawers guide for storing FTDC splice trays. The splice module provides a convenient point at which individual fibers, such as pigtails from FTDC Patch Module, can be spliced to individual fibers from external outside plant cable. The splice module can be installed, operated and maintained with access to only the front of the rack.



Features

Removeable front and rear door allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Swing out adpater panel design allow easy access to connector
Individual slide out splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out
View Complete Details

FIXED ATTENUATOR FC

  • Model LTOC-ATT-FC-XX
Features

Low backreflection
High power endurance
Precise control of attenuation range
Easy installation
Application

Fiber optic telecommunications
LAN (Local Area Network)
High speed transmissions system
Bi-directional system
View Complete Details

FTDH SUBRACK

  • Model LTOC-FTDH-SPM-SP2
FTDH Fiber Management System are designed for terminating optical fiber in exchanges or communications room where higher density is required.

FTDH features a modular system for splicing and patching with flexible cable management systems. All cable are front accessable with individual slide out splicepatch module for easy fiber maintenance. A 42U FTDH is able to accomodate up to 1440 splices and patch cables and is a cost effective solution for optic fiber management.
View Complete Details

FIBER ADAPTER DIN

  • Model Number LTOC-ADP-DI-XXYY
FIBER ADAPTER DIN
Features

Meets DIN 47256 specification
Low insertion loss
Good exchangeability
Good repeatability
Ceramic or bronze sleeve
View Complete Details

Variable Optical Attenuator

  • Model OFA-620
OFA-620VARIABLE OPTICAL ATTENUATOR
Litech, Fiber Optic Multiplexer (FOM), provides the electrical to optical conversion of electronic communication and data signals. Litech simultaneously transmits and receives optical signals through optical fiber, and converts them back to original electrical signal in full duplex transmission.

Designed as a single unit (1U), 1923 rack mountable, 4 slots of a modular design at the rear of the chassis, Litech can either be equipped with T1 E1, V.35, or Ethernet cards and may extend the service range up to 100 KM over fiber optic cable.
View Complete Details

FTTH AERIAL DROP CABLE

  • Model LTOC-CB-XX14-YY
FTTH drop cable utilizes two parallel non-metallic strength members protected optical fiber unit, and with a LSZH jacket, Fiber unit is positioned in the centre, outdoor drop cable is with additional messenger wire.



Applications

Used in outdoor cabling.
Used as drop cable for FTTH application.


Features
Low cost
Compact and light weight.
Easy connect with field installable connector without splicing, fast and convenient.
Easy stripping and installation.
Excellent tensile and crush performance, the span distance for self-support type can be up to 50 meters.
Non-metallic strength member is Kevlar fiber reinforced plastic known as K-FRP.
Soft and flexible, good bending performance.
Flame retardant LSZH jacket meets relevant fire protection requirements in indoor environment.
High carbon steel messenger wire enables the self-support type has excellent tensile strength.
View Complete Details

FTDC SWING OUT PATCH MODULE

  • Model Number LTOC-FTDC-XXP-YY
The FTDC Splice Module is a rack-mountable module that contains splice drawers guide for storing FTDC splice trays. The splice module provides a convenient point at which individual fibers, such as pigtails from FTDC Patch Module, can be spliced to individual fibers from external outside plant cable. The splice module can be installed, operated and maintained with access to only the front of the rack.

Features

Removeable front and rear door allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Swing out adpater panel design allow easy access to connector
Individual slide out splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out
View Complete Details

OPTICAL CABLE ASSEMBLIES

OPTICAL CABLE ASSEMBLIES
Application

Telecommunication network
CATV system
Local Area Network
CATV system
View Complete Details

FTDC Splice Module

  • Model Number LTOC-FTDC-XXSP-YY
The FTDC Splice Module is a rack-mountable module that contains splice drawers guide for storing FTDC splice trays. The splice module provides a convenient point at which individual fibers, such as pigtails from FTDC Patch Module, can be spliced to individual fibers from external outside plant cable. The splice module can be installed, operated and maintained with access to only the front of the rack.



Features

Removeable front and rear door allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Swing out adpater panel design allow easy access to connector
Individual slide out splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out
View Complete Details

MINI LIGHT SOURCE

  • Model LFS-105S
LFS-105S MINI LIGHT SOURCE
Features

40 Hours operation time with 3 1.5V batteries
Stabilized output power
Stable output wavelength
High reliability
Pocket size
Easy operation
Waterproof designs
View Complete Details

FTDP PULL OUT SPLICE MODULE

  • Model Number LTOC-FTDP-XXS-YY
FTDP Fiber Distribution Panels are designed for terminating optical fiber in exchanges or communications room where higher density is required.

FTDP features a modular system for fiber splicing and patching with flexible cable management systems. A cost effective and easy installation solutions for fiber optic management system.



Features

Removeable front and rear door allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Slide out design allow easy access and reduce installation time
Flappable splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out
View Complete Details

INDOOR FDH NGFM CABINET

  • Model LTOC-NGFM-CAB
NGFM Fiber Management System are designed for terminating optical fiber in exchanges or communications room where higher density is required. NGFM features a modular system for splicing and patching with flexible cable management systems. All cable are front accessable with individual slide out splice organizer tray for easy fiber maintenance. A 46U NGFM is able to accomodate more than 600 splices and patch cables and is a cost effective solution for optic fiber management.



Advantages

Total Fiber Management Systems
Space for excess patch cables
High Density
Splice and patch in one tray
Cater for all connector type
Individual slide out splice organizer trays provide easy access to splices
Proper strain relief for incoming cables
Good appearance
View Complete Details

MFM SWING OUT PATCH MODULE

  • Model Number LTOC-MFM-XXP-YY
MFM Fiber Distribution Panels are designed for terminating optical fiber in exchanges or communications room where higher density is required.

MFM features a modular system for fiber splicing and patching with flexible cable management systems. MFM consists of a splice module and a patch module to provide a cost effective and easy installation solutions for fiber optic management system.



Features

All front access allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Swing out adapter panel design of patch module allows easy access to the pigtail cable at the back
Slide out splice module design allows access to fiber splice tray and reduce installation time
Flippable splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out
View Complete Details

FTDP PULL OUT PATCH MODULE

  • Model Number LTOC-FTDP-XXP-YY
FTDP Fiber Distribution Panels are designed for terminating optical fiber in exchanges or communications room where higher density is required. FTDP features a modular system for fiber splicing and patching with flexible cable management systems. A cost effective and easy installation solutions for fiber optic management system.



Features

Removeable front and rear door allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Slide out design allow easy access and reduce installation time
Flappable splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out
View Complete Details

NGFM FIBER OUTDOOR DISTRIBUTION HUB 192 CORE

  • Model LTOC-NGFM-FDHM-192
Total fiber management for up to 192 fibers

Space for excess patch cables

Modular design provide high flexibility

Front access easy maintenance

Proper stain relief for all cables

Mountable on concrete or metal base
View Complete Details

FTDS Fiber Management System

  • Model LTOC-FTDS-SPM-SR1
FTDS Fiber Management System are designed for terminating optical fiber in exchanges or communications room where higher density is required.

FTDS features a modular system for splicing and patching with flexible cable management systems. All cable are front accessable with individual slide out splicepatch module for easy fiber maintenance. A 42U FTDS is able to accomodate up to 1440 splices and patch cables and is a cost effective solution for optic fiber management.
View Complete Details

MPO TDP PATCH PANEL 4U

  • Model LTOC-MPO-TDP-4U
Design for 19 inch cabinet and rack
Universal modular design, Snap in latch, easy installation and maintenance
4U patch panel equipped with pullout cable tray, front and rear access
4U patch panel equipped with metal handle in the front, easy installation and cabl managing
1U2U patch panel sliding drawer design, easy access1U2U4U patch panel with MPO-LC cassette module, up to 72144288-fiber high-density
1U2U patch panel equipped with cable tray, Velcro strip and cable rings
Cable route identification, easy managing and maintenance
View Complete Details

FIBER FACE PLATE FP1

  • Model LTOC-FTH-FP1-XX
Features :

Terminate up to 4 fiber
Snap of adapter plate for different fiber adapter : SC, FC, LC, E-2000 & etc
Angled outlet to avoid sharp bending of patchcord
Perfect for FTTH pre-terminate or field terminate cable
Comply to 30mm minimum bend radius requirement
View Complete Details

Optical Circulator

  • Model LTOC-OPC-X-X-XX-X-YY
Features

Low Insertion Loss

Wide Band High Isolation

Low PDL

Compact In-Line Package

High Stability and Reliability

Epoxy Free on Optical Path



Applications

Optical Amplifier

Metro Area Network

Wavelength Add Drop

Dispersion Compensation

Bi-Direction Communication
View Complete Details

FDF FIBER DISTRIBUTION BLOCK

  • Model LTR-PN-FUJC-XX-YY
FDF FIBER DISTRIBUTION BLOCK (FUJITSU TYPE)
Features


Available For FC Connector 12 core & 24 Core
Comes with adapter & plastic cover
There are no additional images for this product.
View Complete Details

FTTH INDOOR DROP CABLE

  • Model LTOC-CB-XX13-YY
Ftth drop cable utilizes two parallel non-metallic strength members protected optical fiber unit, and with a LSZH jacket. Fiber unit is positioned in the centre



Applications

Used in indoor cabling;
Used as drop cable for FTTH application.


Features

Low cost
Easy connect with field installable connector without splicing, fast and convenient.
Excellent tensile and crush performance.
Non-metallic strength member is Kevlar fiber reinforced plastic known as K-FRP.
Soft and flexible, good bending performance.
Flame retardant LSZH jacket meets relevant fire protection requirements in indoor environment.
View Complete Details

Plc Splitter

  • Model LTOC-PLC-XXX-XXX-YY
Litech PLC splitters is based on planar lightwave circuit technology and precision aligning process which divide a single optical input into multiple optical outputs uniformly, and offering superior optical performance, high stability and high reliability to meet various application. Litech offers variety of splitter products that are unconnectorized or connectorized in the form of either module cassette, rack-mount or chasis mount with fiber diameter up to 3 mm, and are suitable for both indoor and outdoor installation.



Features

Low insertion loss
Low PDL
Compact Design
Wide Operating Wavelength
Wide Operating Temperature
High Reliability and Stability
Telecordia GR-12211209 Compliance


Applications

FTTX Deployments PON Networks
CATV Links
Optical Signal Distribution
View Complete Details

STABILIZED LASER LIGHT SOURCE

  • Model FLS-101
FLS-100 STABILIZED LASER LIGHT SOURCE
Litech, Fiber Optic Multiplexer (FOM), provides the electrical to optical conversion of electronic communication and data signals. Litech simultaneously transmits and receives optical signals through optical fiber, and converts them back to original electrical signal in full duplex transmission.

Designed as a single unit (1U), 1923 rack mountable, 4 slots of a modular design at the rear of the chassis, Litech can either be equipped with T1 E1, V.35, or Ethernet cards and may extend the service range up to 100 KM over fiber optic cable.
View Complete Details

MFM PULL OUT SPLICE MODULE

  • Model Number LTOC-MFM-XXS-YY
MFM Fiber Distribution Panels are designed for terminating optical fiber in exchanges or communications room where higher density is required.

MFM features a modular system for fiber splicing and patching with flexible cable management systems. MFM consists of a splice module and a patch module to provide a cost effective and easy installation solutions for fiber optic management system.



Features

All front access allow easy access to patch and fiber trays
Interchangeable adapter plates accommodate various types of connectors
Swing out adapter panel design of patch module allows easy access to the pigtail cable at the back
Slide out splice module design allows access to fiber splice tray and reduce installation time
Flippable splice organizer trays provide easy access to splices for maintenance
Strength member clamp provides strain relief to avoid cable pull-out

Home About Us Product News & Events Contact Us
Copyright Litech Technology. All Rights Reserved
View Complete Details

FIBER SPLICE PROTECTOR SLEEVE

  • Model LTCV-ACC-HS-XX
Clear outer heatshrink material

Low temperature hot melt adhensive to encapsulate the splice

Stainless steel rod for single fiber splices and a ceramic rod for ribbon fiber splices to ensure

proper alignment and rigidity
View Complete Details

MPO FPP PATCH PANEL 1U

  • Model LTOC-MPO-FPP-1U
Design for 19 inch cabinet and rack
Universal modular design, Snap in latch, easy installation and maintenance
4U patch panel equipped with pullout cable tray, front and rear access
4U patch panel equipped with metal handle in the front, easy installation and cabl managing
1U2U patch panel sliding drawer design, easy access1U2U4U patch panel with MPO-LC cassette module, up to 72144288-fiber high-density
1U2U patch panel equipped with cable tray, Velcro strip and cable rings
Cable route identification, easy managing and maintenance
View Complete Details

CROSS CONNECT CABINET OUTDOOR FGC

  • Model: LTCN-MS-FGC-XX
The FGC Outdoor Cross Connect Cabinet is design to house up to 2400 pair of 10 pair MC Disconnection Module. The cabinet is made of glass fibre re-inforced plastic material with ultra-violet protection for outdoor applications.

Fitted with supporting frame to accommodate 10 pair modules
Ultra Violet resistance
Flammability resistance
Chicane ventilation system ensure good air circulation and avoid condensation in hot and humid environment
Cable guide rings provide cable routing and management for jumpers
Front and rear accessible
Resistance to corrosion and most of the chemical substances.
Very high resistance to impact (Protection Index: IP 439)
Mountable on concrete or polyester plinth
View Complete Details

Optical Fiber Identifier

  • Model OFI-500
Features

Easy and convenient operation with a single keystroke
Detecting three signal frequencies 2kHz, 1kHz, 270Hz
Displaying signal in intensity
Concise LED light
Low battery reminder
Two 1.5V dry batteries (Mignon AA size)
Interchangeable adapter heads (clamps) for 250m900m fiber and 2.03.0mm jacketed fiber
View Complete Details

STRAIGHT FEMALE WIRE WRAP

  • Model: LTBL-IDC-1SF-W2P
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

DDF JUMPER WIRE

  • Model: LTZF-JMP-DDBW-XX
DDF JUMPER WIRE ONE PAIR
Jumper wire is used to cross-connect DDF blocks. it is composed of one twisted pair solid bare copper wire, without outer jacket.
View Complete Details

Fuse Alarm Panel

  • Model: LTZF-DSXF-1916-05
The fuse alarm panel provides protection and warning function for the power feeding of OLTE,

PCM or other transmission equipments.

Replaceable fuse, you can replace it from the front side.

High capacity, up to 24 power feeding circuits. You can order the model (8, 12, 16, 20, 24 etc)

as required. Fits for 19 or 23 rack.

The power feeding path is independent. When you replace the fuse, the other path does not be

affected.
View Complete Details

PORT BNC FEMALE PANEL MOUNT

  • Model: LTBL-PM32-3FF-45FB
Litech offer wide range of rack mountable balun panel for conversion of 75 ohm coaxial transmissions to 120ohm balanced twisted pair and vice versa.The balun panel are designed with variety of connector interface to suite different applications in the network. Standard balun panels are 19 rack mount, 21 and 23 are available upon request.
View Complete Details

MAGAZINE ARRESTOR

  • Model: LTZF-CL1-10A-PBT
Litech Magazine Arrestor ia mainly used for equipment surge protection. It is effective device for prevention of over-voltage and over-current caused by thunder and lighting over cable or circuit, or caused by electrical induction and short circuit. Litech magazine Arester is widely used in Distribution Frame and Distribution Box which is using Litech MC 10 Pair Disconnection Module.

Prevent damages caused by thunder lighting and electrical wires induction
Self recovery without the maintenance or replacement
Feature 10 group of over voltage fast-circuit magazine design. Short-Circuit will effect when over-voltage and over-current condition
Unique design prevent fire under over-current condition
Quick response to over-voltage surge for better over-voltage protection
Casing made of fire retardant plastic
View Complete Details

PIGTAIL DOUBLE BNC MALE

  • Model: LTBL-PGT2-3SM-45F
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

Multiplexer

  • Model LTCV-FMUX-SMX-Y-Z
Litech, Fiber Optic Multiplexer (FOM), provides the electrical to optical conversion of electronic communication and data signals. Litech simultaneously transmits and receives optical signals through optical fiber, and converts them back to original electrical signal in full duplex transmission.

Designed as a single unit (1U), 1923 rack mountable, 4 slots of a modular design at the rear of the chassis, Litech can either be equipped with T1 E1, V.35, or Ethernet cards and may extend the service range up to 100 KM over fiber optic cable.
View Complete Details

Rack Mountable Balun Panel

  • Model: LTBL-PN32-1FF-45FF
Litech offer wide range of rack mountable balun panel for conversion of 75 ohm coaxial transmissions to 120ohm balanced twisted pair and vice versa.The balun panel are designed with variety of connector interface to suite different applications in the network. Standard balun panels are 19 rack mount, 21 and 23 are available upon request.
View Complete Details

DSX CABLE CORE

  • Model: LTZF-JP-120-05C
Cross-connect wire is used to wire the cross-connect. It is composed of two twisted pairs with a tracer conductor (five conductors total) 24 AWG, solid copper-tinned wire; there is no outside jacket.
View Complete Details

DDF TEST CORD

  • Model: LTZF-DDF-TES-XXYY
DDF TEST CORD
With one HDF plug and banana plugscrocordile clipRJ11 plug
For one-sided access to a signal in High Densifty DDF module and another side to tester interface
View Complete Details

PIGTAIL DOUBLE Baluns

  • Model: LTBL-PGT2-1SM-45F
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

PORT BNC FEMALE WIRE WRAP

  • Model: LTBL-PN32-3FB-W2P
Litech offer wide range of rack mountable balun panel for conversion of 75 ohm coaxial transmissions to 120ohm balanced twisted pair and vice versa.The balun panel are designed with variety of connector interface to suite different applications in the network. Standard balun panels are 19 rack mount, 21 and 23 are available upon request.
View Complete Details

ARRESTOR POLE

  • Model: LTZF-CL1-10A-ARR
Transient surge voltage can be caused by lightning and equipment. Gas discharge operation normally last a few microseconds and does not generate any significant heat. High surge voltage also can be cause by induction from power cables will last longer time, which result in longer operation time for gas discharge tube and generate significant heat and causing damage or fire to equipment. To prevent, fail safe mechanism is added to gas discharge tube to create a short circuit when overcurrent occurred.

The failed-safe device is a short-circuit spring that is mounted on the center electrode of the gas discharge tube. Prior to operation, a solder pellet is installed between the spring and the center electrode and thin insulation tubes cover sharp projections on both end of the spring. When the prolonged discharge operation causes the temperature of gas discharge tube to the melting point of the solder pellet and thin insulation tube, the short circuit spring will touch the electrodes and cause the short circuit between outer electrodes and center electrode. This makes all the electrodes permanently short circuit, creating a low resistance path to ground through extra cable or device.
View Complete Details

BALUN BOX DOUBLE

  • Model: LTBL-BOX2-1SF-45F
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

BALUN BOX DOUBLE BNC FEMALE

  • Model: LTBL-BOX2-3SF-45F
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

DUAL TELCO PLUG Balun Panel

  • Model: LTBL-PN48-3FB-2T50
Litech offer wide range of rack mountable balun panel for conversion of 75 ohm coaxial transmissions to 120ohm balanced twisted pair and vice versa.The balun panel are designed with variety of connector interface to suite different applications in the network. Standard balun panels are 19 rack mount, 21 and 23 are available upon request.
View Complete Details

PORT BNC FEMALE Balun Panel

  • Model: LTBL-PN32-3FB-45FF
Litech offer wide range of rack mountable balun panel for conversion of 75 ohm coaxial transmissions to 120ohm balanced twisted pair and vice versa.The balun panel are designed with variety of connector interface to suite different applications in the network. Standard balun panels are 19 rack mount, 21 and 23 are available upon request.
View Complete Details

SPLICE BRIDGE

  • Model LTCP-MS-40C-25
The MS Modular Splicing System is a proven splicing systems that provide the realibility connection for multi-pair cable splicing. The MS Splicing also features splicing technology that reduced working time for inside and outside plant splicing.

Proven technology to splice multipair telephone cable
Features Insulation Displacement Contact, no jacket stripping needed
Accept 0.32mm to 0.6mm solid conductor
Complete 25 pair gas tight connections in single crimp
Test port available for testing without service interruption
Durable polycarbonate material can withstand multipair crimping and reopening
Easy installation and user friendly
View Complete Details

CROSS CONNECT CABINET OUTDOOR MC

  • Model: LTCN-MS-MC-XX
The MC Outdoor Cross Connect Cabinet is design to house up to 2400 pair of 10 pair MC Disconnection Module. The cabinet is made of electro-galvanized steel and outdoor epoxy powder coated for outdoor applications.
View Complete Details

BALUN BOX

  • Model: LTBL-BOX-1SM-45F
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

BALUN BOX BNC FEMALE

  • Model: LTBL-BOX-3SF-45F
Litech offers a complete range of baluns for system which have different characteristic impendence. Baluns are used to solve the impendence mismatch problem in modern transmission system, where many modern system are designed with 120 Ohm balanced twisted pair cable where as most of the older system are 75 Ohm unbalanced interface network and vice versa. Litech manufactured baluns with variety of connector interface and design to suite different applications in the network.
View Complete Details

WALL MOUNT DP

  • Model: LTZF-PBX-100N
Wall Mount DP are used indoor to provide interconnection between incoming outside plant cables and indoor cables in customer premises access for commercial and industrial telecommunication application.It designed for easy, flexible and efficient installation as well as highest quality with corrosion protection and tamper proof.It also comes with hinged type for easy removal or replacement and will not deform or wrap during its life time period.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Tan Eng Piow (Advanced Network Solutions Sdn Bhd)
  • 33 & 35 Jalan PJU 1A/16, Taman Perindustrian Jaya Subang, Selangor, Malaysia
  • Share us via